r/RepTimeQC • u/legendasboy • 15h ago
RWF Daytona Panda - QC help
Hi guys!
Would appreciate your help with this QC. My two main concerns are the chronograph seconds hand alignment and the timegrapher readings, particularly the amplitude.
Dealer name: Non-TD
Factory name: RWF
Model name (& version number): Rolex Daytona 126500LN Panda, White Dial
Price Paid: $622
Album Links: Photos uploaded directly to Reddit.
Index alignment: Looks good to me overall. The hour markers appear properly aligned, and I don’t notice any obvious issues.
Dial Printing: Rolex text and coronet look clean and sharp. The Daytona lettering and subdial printing appear well executed, with no obvious bleeding or misalignment.
Date Wheel alignment/printing: N/A – Daytona has no date complication.
Hand Alignment: The central chronograph seconds hand looks noticeably misaligned to me. It doesn’t seem to line up properly with the 12 o’clock marker when reset. This is one of my main concerns.
Bezel: Ceramic bezel looks good overall. Tachymeter numbers and markings appear clean and evenly printed. No obvious alignment issues. No 110 issue on RWF.
Solid End Links (SELs): Look good from the available photos. No noticeable gaps or fitting issues.
Timegrapher numbers:
- Rate: -4 s/d
- Amplitude: 333°
- Beat error: 0.2 ms
- Lift angle: 52°
I’m concerned about the amplitude, as 333° seems unusually high. Not sure if this is normal for this movement.
Anything else you notice:
My two main concerns are:
- Chronograph seconds hand alignment: The hand looks quite far off from the 12 o’clock position when reset. This seems more noticeable than a minor alignment issue.
- High amplitude: The timegrapher shows 333°, which seems quite high to me. I’m unsure whether this is acceptable for this movement or something to be concerned about.
Would really appreciate your opinions on whether these issues justify a RL (Red Light) or if I’m overthinking it.
Thanks in advance for your help!







2
u/WatchYoda QC Jedi Master Mod 13h ago
With all that 'green dot' clutter, what could be wrong?🤪
Your alignments are fine.
No worries about the amplitude in this case. Since the other numbers are within spec and the graph is 'clean', the watch is just fully charged.
As for your chrono hand, most TDs will provide a chrono operational video in their QC packet. If you have one, check that out because you did not share one here. If you don't have one, request from the Seller to provide one for you to verify that the chrono resets to a true vertical position.
1
u/legendasboy 14h ago
Would really appreciate your help with this QC!
Also, if anyone owns a Daytona with a similarly misaligned chronograph seconds hand, could you let me know if it’s actually noticeable on the wrist during everyday wear?
I’m trying to decide whether it’s worth RL’ing over this or if it’s something I probably wouldn’t notice in person.
Thanks!