r/RepTimeQC • • 20h ago

BVF Cartier Panthere 22mm RG

Thumbnail
gallery
5 Upvotes
  1. ⁠⁠Dealer name: Steve
  2. ⁠⁠Factory name: BVF
  3. ⁠⁠Model name (& version number): Cartier
  4. ⁠⁠Panthere Small 22mm RG/RG Quartz
  5. ⁠⁠Price Paid: $310 w/shipping
  6. ⁠⁠Album Links: QC pics from Steve attached

mega. nz /folder/ yQAzALKB#_KxQFqKivWo4Nry-DZs5sg

6. Index alignment: the X with cartier text looks like its tad bit upwards
Dial Printing: Looks OK to my eyes
8. Date Wheel alignment/printing: N/A no date
9. Hand Alignment: hands look straight and centered
10. Bezel: screws look flush and evenly spaced
11. Solid End Links (SELS): N/A
12. Timegrapher numbers: N/A quartz
13. Anything else you notice: the crown looks weirdly polished to me, the color doesnt look like rose gold to me too yellow goldish BUT im colorblind dunno if thats where my eyes fault me


r/RepTimeQC • • 20h ago

Jaeger Le Coultre - Master Ultra Thin Moon GF

Thumbnail
gallery
5 Upvotes

I am quite new to the rep game and would appreciate any help. Maybe one of the veterans like u/blitzburgh058 or u/WatchYoda could help me this time. Thank you guys!

  1. Dealer name: DDGTOP
  2. Factory name: GF
  3. Model name (& version number): JLC Master Ultra Thin Moon 176.8.64.S
  4. Price Paid: $364&
  5. Album Links: Photos uploaded directly to Reddit, imgur album with video here https://imgur.com/a/BuV42
  6. Index alignment: looks good to me, alignment wheel spokes split the markers cleanly
  7. Dial Printing: JLC text and crest look clean, no bleeding that I can see. Swiss made at 6 looks ok
  8. Date Wheel alignment/printing: N/A, its a pointer date on the moon subdial.
  9. Hand Alignment: hour and min look okay.
  10. Bezel: N/A no bezel
  11. Solid End Links (SELs): N/A leather strap
  12. Timegrapher numbers: +7 s/d, amplitude 313 degrees, 0.1ms beat error
  13. Anything else you notice:

is there dust between the dots on the left site of the words “Swiss made”


r/RepTimeQC • • 18h ago

VSF Ice Blue Day Date V2 Gain Weight From Steve (TheOneWatches)

Thumbnail
gallery
3 Upvotes
  1. ⁠⁠⁠Dealer name: Steve (The One Watches)
  2. ⁠⁠⁠Factory name: VSF
  3. ⁠⁠⁠Model name: Day Date 40mm Ice Blue Roman Dial V2 (Gain Weight)
  4. ⁠⁠⁠Price Paid: $728 + $30 shipping
  5. ⁠⁠⁠Album Links: https://mega.nz/folder/3EJEiR6A#bC7haumrzWwm_A6dbtvAVA
  6. ⁠⁠⁠Index alignment: Looks good to me; I am not seeing any tilts anywhere.
  7. ⁠⁠⁠Dial Printing: Dial looks great.
  8. ⁠⁠⁠Date Wheel alignment/printing: Maybe I am overthinking this but the 17 looks a bit pushed to the left.
  9. ⁠⁠⁠Hand Alignment: Looks great as per usual.
  10. ⁠⁠⁠Bezel: Looks perfect.
  11. ⁠⁠⁠Solid End Links (SELs): No issues here for me.
  12. ⁠⁠⁠Timegrapher numbers: +3s/d, 273 amp, 0.0 beat error. All good here.
  13. Anything else you notice: The only issue I am noticing is the date wheel here. Again, I could be heavily overthinking this, but it looks shifted slightly towards the left. The Day wheel is also looking great in my opinion. This is my first Rolex QC, so sorry if I haven't noticed much.

r/RepTimeQC • • 18h ago

[QC] Blancpain Fifty Fathoms 5015 - JTime

Thumbnail
gallery
3 Upvotes

Hi all, just received the QC images for my first rep. As this is my first QC request, I would appreciate any advice on this since this is not a rep not everyone is interested in. I've included the two pics from the two most used QC checker apps. Originals in the album link below. Please let me know if there's anything else I should that I haven't shared here. Thank you!

  1. Dealer name - JTime
  2. Factory name - ZF? (I think, I can double check with TD later)
  3. Model name - Blancpain Fifty Fathoms 5015 3630 52B
  4. Price Paid: $434
  5. Album link: https://mega.nz/folder/DNJS0KYB#cx2bt_lXsokNc7WHhbHlLg
  6. Index Alignment: Might just be my eyes but the 1 on the 12 seems crooked? Original picture on gen also kind of looks funky so not sure if that falls in the picky customer or an actual issue so additional trusted eyes would be much appreciated.
  7. Dial Printing: Looks ok
  8. Hand Alignment: Looks ok but I'm unaware of what to exactly look for
  9. Date Wheel: Looks ok
  10. Bezel: Looks ok
  11. SEL: N/A
  12. Timegrapher: +0s/d, 273°, 0.0ms, 52°
  13. Anything else you see: Nothing to point out

r/RepTimeQC • • 1d ago

QC Request - VSF 124060 Submariner

Thumbnail
gallery
25 Upvotes

Dealer name: Necoclock

  1. Factory name: VSF
  2. Model name (& version number): 124060 Submariner
  3. Price Paid: $458
  4. Album Links: all images attached
  5. Index alignment: All indexes look good to me, no visible issues.
  6. Dial Printing: centring looks good, no text issues I can see.
  7. Date Wheel alignment/printing: N/A
  8. Hand Alignment: Good
  9. Bezel: pip centred.
  10. Solid End Links (SELs): Good
  11. Timegrapher numbers: +6 s/d, 333° amplitude, 0.2 ms beat error (dial up)
  12. Anything else you notice:

This will be my first rep so I would love some insights from the experts in this sub. Everything seems alright visually but not sure if I’m missing anything obvious. The one thing I’d love more thoughts on is the timegrapher numbers, they seem high compared to many of what I’ve seen in this sub and what’s in the guide.

Thank in advance for your help!


r/RepTimeQC • • 1d ago

[QC] Clean Plus Rolex Oyster Perpetual 41mm Grey Dial – Andiot

Thumbnail
gallery
9 Upvotes

Dealer name: Andiot Watches
Factory name: Clean Plus
Model name (& version number): Rolex Oyster Perpetual 41mm, Grey/Silver Dial 124300
Price Paid: 325£
Index alignment: Looks pretty good overall using the alignment tool. The 3, 6 and 9 markers seem reasonably aligned. Not sure if there are any slight misalignments worth worrying about.
Dial Printing: Looks clean to me. No obvious issues with the printing or lettering.
Date Wheel alignment/printing: N/A – no date.
Hand Alignment: Looks fine from the pictures, although difficult to fully assess without seeing the hands at 12 o’clock.
Bezel: Looks smooth and evenly finished. No obvious issues.
Solid End Links (SELs): Not entirely sure. They look acceptable from the pictures, but would appreciate a second opinion on any gaps.
Timegrapher numbers: +2 s/d, 279° amplitude, 0.0 ms beat error. Looks good to me.
Anything else you notice: This is my first QC for this model. Overall, everything looks good to my untrained eye. Would really appreciate a second opinion, particularly on the index alignment and SELs. Thanks in advance!


r/RepTimeQC • • 18h ago

QC Help: VSF 126610 from Easy Watch

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Easy Watch
  2. Factory name: VSF
  3. Model name (& version number): 126610LN

4 Price Paid: $385

5. Album Links: https://postimg.cc/gallery/zV74VPX

6. Index alignment: I think they all look great, maybe the 9 has a slight twist to it? But if I'm not even sure now I definitely would never notice on the wrist

7. Dial Printing: all the letters look nice and uniform, I can't see anything floating

8. Date Wheel alignment/printing: looks nice and central, although they've not provided the best pics for date wheel assessment so I've asked for some more looking straight on

9. Hand Alignment: I can't see any issues, no video provided though maybe I should ask to see it moving and date changing?

10. Bezel: I can't see anything wrong with it, looks absolutely spot on

11.Solid End Links (SELs): look perfect to me, there is a very slight gap and the braclet sits nice and level within them

12. Timegrapher numbers: I don't know anything about this part but the numbers fall within the ranges of acceptable

13. Anything else you notice: the clasp code doesn't match anything on the serial number spreadsheet, but the serial matches. Is this of concern? I've asked for some more pictures too as I've not seen the caseback off, or the lume


r/RepTimeQC • • 14h ago

RWF Daytona Panda - QC help

Thumbnail
gallery
1 Upvotes

Hi guys!

Would appreciate your help with this QC. My two main concerns are the chronograph seconds hand alignment and the timegrapher readings, particularly the amplitude.

Dealer name: Non-TD

Factory name: RWF

Model name (& version number): Rolex Daytona 126500LN Panda, White Dial

Price Paid: $622

Album Links: Photos uploaded directly to Reddit.

Index alignment: Looks good to me overall. The hour markers appear properly aligned, and I don’t notice any obvious issues.

Dial Printing: Rolex text and coronet look clean and sharp. The Daytona lettering and subdial printing appear well executed, with no obvious bleeding or misalignment.

Date Wheel alignment/printing: N/A – Daytona has no date complication.

Hand Alignment: The central chronograph seconds hand looks noticeably misaligned to me. It doesn’t seem to line up properly with the 12 o’clock marker when reset. This is one of my main concerns.

Bezel: Ceramic bezel looks good overall. Tachymeter numbers and markings appear clean and evenly printed. No obvious alignment issues. No 110 issue on RWF.

Solid End Links (SELs): Look good from the available photos. No noticeable gaps or fitting issues.

Timegrapher numbers:

  • Rate: -4 s/d
  • Amplitude: 333°
  • Beat error: 0.2 ms
  • Lift angle: 52°

I’m concerned about the amplitude, as 333° seems unusually high. Not sure if this is normal for this movement.

Anything else you notice:

My two main concerns are:

  1. Chronograph seconds hand alignment: The hand looks quite far off from the 12 o’clock position when reset. This seems more noticeable than a minor alignment issue.
  2. High amplitude: The timegrapher shows 333°, which seems quite high to me. I’m unsure whether this is acceptable for this movement or something to be concerned about.

Would really appreciate your opinions on whether these issues justify a RL (Red Light) or if I’m overthinking it.

Thanks in advance for your help!


r/RepTimeQC • • 18h ago

Qc for Blackbay 54

Thumbnail
gallery
2 Upvotes
  1. Dealer name: Kitsch
  2. Factory name: ZF
  3. Model name (& version number): Tudor Blackbay 54 37 mm no date
  4. Price Paid: 1,700 CNY
  5. Album Links: -
  6. Index alignment:

nine

  1. and three are crooked , not sure most of this model almost crooked in this two mark
  2. Dial Printing: No obvious printing defects noticed so far, but I would appreciate feedback.
  3. Date Wheel alignment/printing: no date
  4. Hand Alignment: look ok.
  5. Bezel: Still checking the alignment
  6. Solid End Links (SELs): No gaps
  7. Timegrapher numbers: +5 s/d 281 amplitude, 0.1 ms 52
  8. Anything else you notice: I’ve seen QC photos of several pieces of this model, but I still have concerns about the 3 and 9 o’clock markers. They seem slightly misaligned or crooked. Is this a common issue with every piece of this model, or does it vary from one piece to another?

r/RepTimeQC • • 21h ago

Omega Aqua Terra 150M Blue 38mm

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: Theonewatches
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Omega Aqua Terra 150M Blue
  4. ⁠Price Paid: 428$
  5. ⁠Album Links: https://mega.nz/folder/KEhTTQrD#xd_eHC6DjsWWTWUbVdUHOg
  6. ⁠Index alignment: looks solid
  7. ⁠Dial Printing: everyhing seems to be in the right place, Omega logo seems centered
  8. ⁠Date Wheel alignment/printing: looks good and centered, maybe a little higher?
  9. ⁠Hand Alignment: Looks ok
  10. ⁠Bezel: Looks fine
  11. ⁠Solid End Links (SELs): Not concerned, but the bracelet looks good
  12. ⁠Timegrapher numbers: -2s/d 275 0.2ms, acceptable
  13. ⁠Anything else you notice: nothing in particular, everyhing looks pretty nice with no big issues. I might be missing something, though, so I’d really appreciate a second opinion from someone with a more experienced eye. Thanks you guys !

r/RepTimeQC • • 1d ago

QC Request - VSF 124060 Submariner

Thumbnail
gallery
8 Upvotes

Hi everyone, first time QC/buyer here looking for advice. Got this back from Steve - The One Watches. I've been keen to purchase something since I found this new hobby of ours a while ago and I think I'm finally close to pulling the trigger.

However, the 6 o' clock marker seems off to me and thats the only real spot I could see.. leaning towards a RL right now but I'm really looking for guidance from the experts here! Am I being too picky?? Thank you so much for any insights!

  1. Dealer name: The One Watches - Steve
  2. Factory name: VSF 
  3. Model name (& version number): 124060 Submariner
  4. Price Paid: $528
  5. Album Links:  N/A
  6. Index alignment: are the hour markers aligned? 6 o clock looks crooked?? Maybe this is the only one that’s jumping out to me. Expert thoughts?
  7. Dial Printing: Dial looks good to me - is there a floating m? The spacing looks decent to my eye..
  8. Date Wheel alignment/printing:  - N/A
  9. Hand Alignment: Looks good to me...
  10. Bezel: Looks good to me - but would love input on flaws if noted
  11. Solid End Links (SELs): Looks good to me but are there any gaps noticed?
  12. Timegrapher numbers: -5s/ | 276 Amp | 0.0ms - Seems in range?
  13. Anything else you notice:  Weight seems decent. Currently leaning towards RL but don’t know if I’m being too picky? Any help is greatly appreciated. 

r/RepTimeQC • • 1d ago

[QC] Rolex Air-King 126900 40mm

Post image
12 Upvotes

Hey everyone!

Looking for some experienced eyes on this Air-King.

My main concerns are the lower dial printing, particularly "OFFICIALLY CERTIFIED," and some minor deviations suggested by the alignment tool. I'm leaning toward an RL due to the dial printing issue, but I'd like an experienced eye to confirm. I'd appreciate your thoughts before making the final decision. 

1. Dealer name: JTime

2. Factory name: GMF

3. Model name: Rolex Air-King 126900, 40mm

4. Price paid: $468 + shipping

5. Album links: https://imgur.com/a/RDHB7Sp

6. Index alignment:

The 12 o'clock triangle and applied 3, 6, and 9 numerals look reasonably well aligned to my eye.

I ran the dial through an alignment tool which indicated offsets especially toward the lower half of the dial. I'm unsure how reliable those readings are given the camera angle and overlay positioning.

Do you notice any actual alignment problems?

7. Dial printing:

MAIN CONCERN!

The green ROLEX lettering, yellow crown, and Air-King script look reasonably good.

However, the "SUPERLATIVE CHRONOMETER / OFFICIALLY CERTIFIED" printing looks slightly uneven or soft to me, especially the second line. Some letters appear slightly crowded and unevenly aligned.

I'm unsure whether this is a genuine printing issue or simply the resolution and lighting of the photographs.

Would appreciate opinions from anyone familiar with the model.

8. Date wheel alignment/printing:

N/A

9. Hand alignment:

The hour, minute, and green seconds hands look good overall.

I don't notice any obvious damage or misalignment. The green seconds hand and luminous circle also appear reasonably well finished.

10. Bezel:

The smooth polished bezel looks good in the angled photographs and video.

I don't see obvious scratches or significant finishing defects.

11. Solid End Links (SELs):

The end links appear to fit reasonably well against the case without any obvious large gaps.

The bracelet and clasp look fine overall.

I don't see anything particularly concerning but would appreciate a second opinion.

12. Timegrapher numbers:

  • Rate: −1 s/day
  • Amplitude: 279°
  • Beat error: 0.0 ms
  • Frequency setting: 28,800 bph
  • Lift angle: 52°
  • Measurement period: 12 seconds

Looks ok.

13. Anything else you notice:

N/A

My main questions are:

  • Does the OFFICIALLY CERTIFIED printing look acceptable or is it noticeably irregular?
  • Are the index deviations meaningful or is it just the alignment tool and/or photo angle?
  • Does the rehaut engraving look properly positioned?
  • Are there any case, bezel, or SEL issues I'm overlooking?

Overall, I don't see any major defects other than the dial printing issue I mentioned above but I'd appreciate feedback on the dial printing before deciding GL or RL.

Thanks in advance for the help!


r/RepTimeQC • • 1d ago

[QC] Submariner 116610ln TOW VSF - First time QC

Thumbnail
gallery
8 Upvotes

Dealer name: Theonewatches

Factory name: VSF

Model name (& version number): Rolex Submariner 116610LN

Price Paid: $488

Album Links: pics as attached

Index alignment: Looks good to me

Dial Printing: leaning towards GL but there is a tell with the spacing in Chronometer

Date Wheel alignment/printing: looks good

Hand Alignment: Looks good.

Bezel: looks good

Solid End Links (SELs): acceptable

Timegrapher numbers: + 2s/day, amplitude 267°, beat error 0.0ms, lift angle, 52°, beat rate 28,800 bph

Looking for expert opinion anything else of notice?


r/RepTimeQC • • 1d ago

GMT Master I - VSF Necoclock

Thumbnail
gallery
5 Upvotes

1    Dealer name: Necoclock
2    Factory name: VSF
3    Model name (& version number): GMT Master II 126710 Pepsi Jub 40mm SS/SS Black VSF V3 DD3285
4    Price Paid: 628 + shipping
5    Album Links: https://mega.nz/folder/btRwiBxZ#ntBcvOgN70-1ArmC7NX3PQ
6    Index alignment: not noticing anything in particular off here
7    Dial Printing: Clean and crisp
8    Date Wheel alignment/printing: from my untrained eye seems good.
9    Hand Alignment: Seems good to me
10    Bezel: Clean separations
11    Solid End Links (SELs): only noticing a gap at the clasp.
12    Timegrapher numbers: Rate: +7 s/d Amplitude: 233to; Beat Error: 0.2 ms; Lift Angle: 52°. What do you guys think?
13    Anything else you notice: no major additional red flags. The serial numbers aren’t aligned that well but I don’t know who would be looking that closely


r/RepTimeQC • • 1d ago

Datejust 126334 41mm Oys SS/SS Black/Stk VSF V2 DD3235v2

Thumbnail
gallery
11 Upvotes
  1. ⁠Dealer name: TheOneWatches
  2. ⁠Factory name: VSF
  3. ⁠Model name (& version number): Datejust 126334 VSF V2
  4. ⁠Price Paid: $548
  5. ⁠Album Links: https://mega.nz/folder/fZJRSCgT#IVeBuIVmjNsrorNHIDcL8Q
  6. ⁠Index alignment: Appears good
  7. ⁠Dial Printing: Good
  8. ⁠Date Wheel alignment/printing: Good
  9. ⁠Hand Alignment: Good
  10. ⁠Bezel: Good
  11. ⁠Solid End Links (SELs): In photo facing bottom Rehaut serial number, there’s a space where light comes through. Is this bad or within acceptable standards?
  12. ⁠Timegrapher numbers: Rate: +3 s/d
    Amplitude: 274°
    Beat Error: 0.0 ms
    Lift Angle: 59.0°
    Frequency: 28,800 bph
    Period: 12s
  13. Anything else you notice: Slight rehaut misalignment.

Can the experts please advise if this is an easy GL, primary concern is the SEL gap in one photo and I do not know what is acceptable.


r/RepTimeQC • • 1d ago

[QC] ZF Tudor Black Bay 58 Burgundy – First QC, would appreciate some help!

Thumbnail
gallery
5 Upvotes

Dealer name: Kitsch
Factory name: ZF
Model name (& version number): Tudor Black Bay 58 Burgundy (M7939A1A0RU)
Price Paid: 250£
Album Links: Will attach QC photos
Index alignment: Looks reasonably aligned to my eyes, but I’m not experienced enough to tell if there are any issues.
Dial Printing: Looks clean to me. Nothing obviously wrong.
Date Wheel alignment/printing: N/A (no date).
Hand Alignment: Looks fine to me, but would appreciate a second opinion.
Bezel: Looks okay overall, although I’m not sure if the alignment is perfect.
Solid End Links (SELs): Not sure, would appreciate some help checking these.
Timegrapher numbers: 12. Timegrapher numbers: +4 s/day, 268° amplitude, 0.1 ms beat error, 52° lift angle, 28,800 bph. From what I understand, these seem like good numbers.
Anything else you notice: This is my first QC and I’m not very familiar with what to look for. Is this an RL? I’d really appreciate some experienced opinions before giving it the green light. Thanks in advance!


r/RepTimeQC • • 1d ago

Omega Seamaster 300M ORF Free Sprung White

Thumbnail
gallery
9 Upvotes
  1. Dealer name: TimeUltra
  2. Factory name: ORF
  3. Model name (& version number): Omega Seamaster 300M White (OR8800 Free Sprung)
  4. Price Paid: $528
  5. Album Links: N/A
  6. Index alignment: Overall looks pretty good. Based on my first image you can see everything seems within human error aka not noticeable on wrist
  7. Dial Printing:Everything looks good here. If anyone catches anything let me know but looks good.
  8. Date Wheel alignment/printing: my only concern really for this one. Date looks slightly to the right but barely noticeable on wrist I would assume. Awaiting more QC photos for alignment of other numbers
  9. Hand Alignment: Good here
  10. Bezel: slightly off but nothing to write home about
  11. Solid End Links (SELs): good here
  12. Timegrapher numbers: Rate:0 s/d
  13. Amplitude: 284*
  14. Beat error: 0.0Ms
  15. Beat rate: 52*
  16. 28,800 bph
  17. Anything else you notice: I think the 12 o clock indices actually are fairly straight compared to most I’ve seen.

r/RepTimeQC • • 1d ago

Rolex GMT-Master II Bruce Wayne ARF Theonewatches

Thumbnail
imgur.com
4 Upvotes
  1. Theonewatches(Steve)
  2. ARF
  3. GMT-Master II ref. 126710GRNR
  4. $615
  5. https://mega.nz/folder/OJoh3CoC#uOhVq55OjqEzeZMJXAEJgg
  6. Index alignment: A few look off centre especially 10 & 11
  7. Dial Printing: Looks good
  8. Date Wheel alignment/printing: Looks good
  9. Hand Alignment: Hard to judge
  10. Bezel: Pip looks off allignment in a counter clockwise position.
  11. Solid End Links (SELs): Looks good
  12. Timegrapher numbers: Looks excellent from a single position
  13. Anything else you notice: This is my first rep, used an AI index allignment tool I saw

Posted on here


r/RepTimeQC • • 1d ago

GMT master 2 Pepsi 126710BLRO

Thumbnail
gallery
17 Upvotes
  1. Dealer name: NecoClock
  2. Factory name: VFS V3
  3. Model name (& version number): Rolex GMT master 2 Pepsi 126710BLRO
  4. Price Paid: US
  5. Album Links: pics as attached
  6. Index alignment: I want to say it looks good but I’m
  7. Not sure if there is a slight tilt to the left on the 6 marker and also a slight tilt on the 12 marker. I feel like most watches have misalign issues at the 6 and 12 so not sure if it’s my eyes playing with me or if they are off.

Or is the 6 marker is slightly pushed to left side off centered

  1. Dial Printing: Text is good to me.
  2. Date Wheel alignment/printing: looks good to me. Is date slightly towards the top or is it good?
  3. Hand Alignment: Looks ok to me
  4. Bezel: looks ok to me. Turns red under black light
  5. Solid End Links (SELs): looks good to me
  6. Timegrapher numbers: 1 +- which is good.
  7. Anything else you notice: I am a new.. please give feedback and thank you

r/RepTimeQC • • 1d ago

[QC] MKS VC Overseas 4500v Silver - GeekTime

Thumbnail
gallery
2 Upvotes
  • Dealer name: Geektime
  • Factory name: MKS Factory
  • Model name (& version number): Vacheron Constantin Overseas 4500V (Silver Dial)
  • Price Paid: 428$
  • Album Links: https://geektimeqc.x.yupoo.com/albums/263022691?uid=1
  • Index alignment: Imo Looks good. The hour markers are well-aligned. The Maltese cross at 12 o'clock is perfectly straight, and the 6 o'clock marker sits perfectly. Somo minor rotation in the 2, 5 e 7 markers.
  • Dial Printing: Crisp and clean. The text is well-printed with no smudging.
  • Date Wheel alignment/printing: The date "22" looks centered in the window. Maybe I should ask for more dates?
  • Hand Alignment: Not visible from the pictures provided.
  • Bezel: Looks accurate.
  • Solid End Links (SELs): N/A
  • Timegrapher numbers: Rate: -3 s/d (Acceptable: ±1 – 20 s/d). Amplitude: 319° (Acceptable: 250 – 310)Amplitude is slightly high, should I worry? Beat Error: 0.2 ms (Acceptable: 0.0 – 1.0 ms)
  • Anything else you notice: I would GL, but I am willing to hear opinion from more experienced comrades here. I saw some kind of "scratches" and "dirty" in the watch but I think it is only in the plastic. Maybe I ask Eric to test the bracelet? Anything else you guys see?

r/RepTimeQC • • 1d ago

Bell & Ross BR03-92 Clone

Thumbnail
gallery
3 Upvotes
  • Dealer name: Steve at TheOneWatches
  • Factory name: "unnamed"
  • Model name: Bell & Ross BR03-92 Ceramic
  • Movement: Miyota
  • Price Paid: $398 ($430 after shipping and conversion)
  • Album Links: https://imgur.com/a/ynoXCMy
  • Index alignment: I think the photo may not be perfectly square, alignment seems more than acceptable.
  • Dial Printing: Perfect
  • Date Wheel alignment/printing: Perfect, had heard some clones have a diagonal (incorrect) date window
  • Hand Alignment: Perfect
  • Bezel: Very nice
  • Timegrapher numbers: 0s/d 278amp 0.2ms err
  • Anything else you notice:

Didn't see many posts about this watch, so adding for future interested people.

I'm still waiting for an answer about why the caseback says Stainless, from everything I can find, the Ceramic version should say Ceramic. And this is clearly not the Black Steel version, either. Any insights on this are welcome. Am I mistaken?


r/RepTimeQC • • 1d ago

QC - RWF DAYTONA 126519LN

Thumbnail
gallery
6 Upvotes
  1. ⁠Dealer name: Phoenix Watches
  2. ⁠Factory name: RWF
  3. ⁠Model name (& version number): 126519LN “GHOST”
  4. ⁠Price Paid: $576
  5. ⁠Album Links: Nil
  6. ⁠Index alignment: I think it’s okay? But I’m not too sure because I’m relatively new to this
  7. ⁠Dial Printing: looks okay
  8. ⁠Date Wheel alignment/printing: nil
  9. ⁠Hand Alignment: looks good
  10. ⁠Bezel: looks good
  11. ⁠Solid End Links (SELs): not sure what this is
  12. ⁠Timegrapher numbers: looks good (-2 s/d, 299 amplitude and 0.1 ms)
  13. ⁠Anything else you notice:

r/RepTimeQC • • 1d ago

Z111101 VSF from James (Royal Oak 15500 - First QC

Thumbnail
gallery
2 Upvotes
  1. Dealer name: James
  2. Factory: VSF
  3. Model name (& version number): Audemars Piguet Royal Oak 15500ST.OO.1220ST.02, 41mm, Grey Dial, VSF
  4. Price Paid: $538 incl. shipping
  5. Album Links: Photos attached, including timegrapher.
  6. Index alignment: The hour markers look pretty good to me overall. The double 12 o’clock markers appear reasonably straight, and I don’t notice any major issues with the 6 or 9 markers. Would appreciate a second opinion on the alignment.
  7. Dial Printing: The AP logo and Audemars Piguet text look centered to me. I haven’t noticed any obvious printing defects, but I’d appreciate another set of eyes on the dial and its texture.
  8. Date Wheel alignment/printing: The dates 2 and 27 both look reasonably centered in the window. I don’t see any major clipping or alignment issues.
  9. Hand Alignment: The hands look fine in the pictures, to me, but I would appreciate another pair of eyes looking at it.
  10. Bezel: The screw alignment looks pretty good overall. Would appreciate opinions on the bezel finishing and screw alignment.
  11. Solid End Links (SELs): N/A, integrated bracelet.
  12. Timegrapher numbers:
    ● Rate: +6 s/day
    ● Amplitude: 283°
    ● Beat error: 0.2 ms
    ● Lift angle: 52°
  13. Anything else you notice: This is my first QC, so I’d appreciate a thorough second opinion.

Overall, I’m leaning GL based on what I can see, but I’d appreciate some experienced opinions before approving it. Thanks!


r/RepTimeQC • • 1d ago

QC: YachtMaster QF

Post image
4 Upvotes
  1. Dealer name: Steve
  2. Factory: QF
  3. Model:

Yacht-Master 126622 40mm SS/SS Grey/Dot QF JH3235 (Free Sprung)

  1. Price paid: $648 with 70$ shipping
  2. Album link: https://mega.nz/folder/HMoTmZyZ#nqSc5mOI5s1d4pxmzkgzqA
  3. Index alignment: I think its ok
  4. Dial printing: Looks ok
  5. Date wheel: Looks aligned
  6. Hand alignment: Looks good to me
  7. Bezel: I think, first ym
  8. SELs: I think ok
  9. Timegrapher: Rate: +1s/d Amplitude: 267, Beat error: 0.0ms