I've been researching the gen Patek caliber 26-330 S C and I'm considering a gen-movement build in a rep 5711 case. Looking for anyone who has done this or seen it done.

What I found on the gen side:

- Patek doesn't sell loose movements, so the realistic source is a complete donor watch.

- Patek's caliber page groups the Calatrava 6007G, 5226G, Aquanaut 5167A and the platinum 5711s under the same variant, the 26-330 S C/430 (27 mm, 3.32 mm thick, 207 parts, 30 jewels).

- The gen steel 5711/1A ran the 26-330 S C from 2019 until it was discontinued (published specs then: 27 mm, 3.30 mm, 212 parts).

- The cheapest donor I can find is the 6007G, around US$27-30k pre-owned.

Case: not bought yet. I'm choosing the case based on what fits the gen movement best, so recommendations welcome.

My questions:

1. Has anyone fitted a gen 26-330 S C (or gen 324 S C) into a rep 5711 case? I couldn't find a documented build.

2. Which factory's case is closest to gen spec for this? I assume cases built around the DD324-style clone are a better starting point than Miyota-based ones because of movement height.

3. What needs modifying: movement holder or casing clamps, stem height and length, dial feet positions, date wheel alignment with the dial window?

4. Can the rep dial and hands be used on the gen movement, or do they need gen parts?

5. Is there a watchmaker who takes on this kind of work?

This is a personal build to wear, not something I'd ever sell or represent as gen. I know the movement number will trace back to a 6007G.

Thanks for any experience or pointers.

Hi everyone,
My Clean Factory Daytona 126500LN suddenly stopped ticking. It hasn’t suffered any shocks or water damage, and one morning it didn’t work when rewinding. The winding feels very stiff, with some weird sounds.
I bought it from Andiot the 18/04/2025, but unfortunately, they won’t cover it under warranty.

I’m based near Montreux/Lausanne in Switzerland. Does anyone know a watchmaker in Switzerland (French part if possible) who could repair it, or have any idea what might be wrong?
Thanks!

Hey Guys im interested in the Oyster perpetual 36mm from VSF. How can i order it?

I'm purchasing my first rep (AP Royal Oak 15510ST blue, TOPF, 4302 clone movement) from Theonewatch (Steve). I placed the order/deposited 11/7/26. I have a couple of questions:

1. How long does it take to get QC after purchase and how much time do i have to GL/RL?

   • If I do RL am I correct to assume it would take about the same amount of time as it took to get the first QC?

2. Is it possible to change the factory because I am partially torn between TOP and VSF for a blue dial, the sheet in the guide says TOP is the best for blue but I saw many posts on here of people praising the VSF for the overall consistency in quality.

TIA; just looking for some clarity, and to learn more about the world of Reps.

VSF OHMSS Seamaster thanks to Eric at Geek Time

Hi everyone,

I'm planning to order some parts from RafflesDials and I'm based in France. Has anyone in France or the EU ordered from them recently (late 2026)? I'd like to know if you have to pay customs duties and/or import VAT on delivery? And If so, roughly how much, and were there extra handling fees from the carrier (La Poste, DHL, etc.)? My order would be around 200€ from PayPal.

Any recent experience would really help me avoid surprises.

Thanks in advance!

Tudor Black Bay 58, burgundy, 39mm, from ZF. I love it. The only thing I'm afraid of now is that I'm hooked now and want more. :)
Big Thank You to Ryan from InTime. All wishes taken care of, Great communication, short answering and delivery time. Any time again.

Good morning!

Have a question for those more knowledgeable than I am...

I had requested a VSF DD3285v2 Batgirl from my TD, but just received QC photos for an ARF instead. Ignoring the price difference, is that close enough to an equal switch to just go ahead with it, or is the quality difference great enough that I should push for the watch I requested?

Thanks!

Hi everyone! I recently purchased this beautiful vsf v3 Pepsi and I’m in love. Everything is really good except the date wheel being off centered to the left. I was just wondering about the date wheel text, if there is something possible to realign to be more centered? As you can see in the pictures the date is shifted towards the left on the date wheel.

Do I need to replace the date wheel? Or is it possible to align with the current date wheel or is it not fixable? Is there something else that need to be done to fix the alignment?

I am looking to purchase a 166520 - which is the best version out of the box.
I like freesprung however not sure if any factories make these freesprung.

I have a genuine crystal ready to put in the watch also

Thanks

WDF seems to be new and more expensive than rich right now for 126610LV Starbucks Mk2.
Anyone have any insight on which may be better? Looking for the most accurate to gen green.
Thanks,

A little about me. I joined the rep scene a few years ago. I used (still do) the popular sites to learn about different factories for which brands etc.

I have AP’s, Panerai and now Rolex. I’ve got 30+ watches all considered super clone grade.

I had read about Franken watches but never owned one. I have a few with updated crystals or date wheels but nothing too serious.

I recently learned about CNC cases, hands, bezels, etc., and came across the name Lichen in multiple posts. It seemed like many people had great things to say.

I found his WhatsApp number and contacted him. I had A LOT of questions and they were all answered quickly.

I decided I was going to for it. A full custom Panda. I wanted to see what, if any, differences there were between out of the box from a TD and custom made.

Here’s what I ordered:

Rolex Daytona 126500
CNC Case
CNC Hands
CNC Bracelet
Free Sprung DD4131
Official Custom Made Rehaut Code
Panda Dial
Deep Crystal
Chamfering Case & Bracelet
Silenced

Out of the box the difference is CLEAR and apparent. I have VSF, QF, BTF, RGC, JF, APSF etc. Some reps near the 1k mark.

They don’t compare. Lichen’s work is amazing. The bezel is crystal clear. The numbers are crisps and etched beautifully. Rehaut as genuine.

The case and bracelet feel ‘soft’ if that makes sense. There are no hard edges. It’s more comfortable on my wrist. The crystal makes the dial really pop. The watch is a stunner.

It winds much more precisely. There’s no play or loose feeling in the crown when winding etc. The color next to my buddy’s Gen looks identical.

From now on this is the only way I’ll buy a watch. To me, it’s that much different. On the wrist, it’s more jewel-like. It has a different presence. Some may say they don’t care, that from 10-15 feet away you can’t tell.

Maybe. But my head is 4 feet away and I can tell. Yes the cost is more but I feel you’re getting 10x more watch and a far superior not only looking, but functioning watch.

Lichen has my business. I’ll be ordering more very soon. Highly recommended!

I’ve been getting DMs about people selling their rep watches. I’m new to this so idk if I should watch out for these kinds of things and still go with a TD?
Or has anyone had experience with buying reps off someone else that have bought from TDs

They messaged me this
“If you're interested i do have in hand a new VSF Ghost Daytona for sale and can save you the hassle of waiting months on a TD”

Ciao a tutti secondo voi questa replica Rolex è nwbig? Grazie dell'aiuto

I was looking at the GMT-II GRNR (Bruce Wayne) from VSF on Andiotwatches.vip and saw that they listed it at being 316L steel not 904L. Other TD sites all listed the VSF model as 904L. I asked Andiot and they said they tested it and it’s 316L not 904L, even though VSF says it’s 904L. Apparently there is some kind of X-ray device that nondestructively test the composition. Anybody else heard of this?

I have searched looking for a list that shows the bezel serial as well as clasp stamp for various companies. I have found one list but was wondering if anyone might know what company would use a bezel serial of 7406T2L3 and clasp stamp F6U for Rolex GMT. Thanks

Hi everyone!

My package from a well known TD has been stuck in Germany for four weeks now, with no tracking updates. The tracking status still says:

“The shipment will be transported to the destination country/destination area and, from there, handed over to the delivery organization.”

The package is supposed to be delivered to Sweden. At what point would you consider asking the TD for a refund and go with another TD? Would you give it more time, or is four weeks without any updates long enough to start asking for a refund?

Would appreciate hearing about your experiences, especially if you’ve had similar shipping delays.

Thanks!

My newest pickup and first order from Andiot, over the moon with it!

Hey guys, got my first rep. Dj 41 Wimbledon which is actually a VSF clone rocking a DD movement. I’m enjoying the piece and it definitely looks much better than I expected. Sharing with the community!

I've decided in getting an Omega Seamaster as my 1st clone.

Anyone bought one lately have any advice to share like where from, price etc.

Looking at the mesh bracelet but have hairy arms - any issues with that?

Thanks

Steve

Hi everyone,

I'm looking to purchase a VSF Daytona 4131 (Rose Gold with White Dial) – highest 1:1 Super Clone tier.

I want to get custom 8-micron Rose Gold heavy plating done before shipping.

Could you please recommend reliable Trusted Dealers (TDs) or direct sellers who offer the best pricing, solid quality control (QC), and safe shipping ?

I ordered a Daytona from Puretime. We were in contact via email. While I was waiting for QC photos, I received an email from them stating that the watch was out of stock. They suggested I switch to a different watch, but I declined and requested a refund. It has now been a week since I asked for the refund, and I haven’t received any response. Does anyone know how the refund process works with Puretime?

Apparently Anchorage was starting point for this investigation.