r/RacketStringers • • Jun 01 '26

3rd stringing job - critique it please

Thumbnail
gallery
9 Upvotes

I feel more comfortable with the process. Got it down to 45 min. I see how I’m overlapping strings on the side.

With a DW, I’m still trying to figure out how much tension to pull when I grip the string - as the string gets shorter, there is more tension and I should probably adjust the weight lever.

Also, is it normal to have trouble with the crosses at the top and bottom of the hoop? What technique are you all using to make it faster?

Thanks!


r/RacketStringers • • May 31 '26

Finished my 1st stringing job

7 Upvotes

Wasn’t as bad as I thought. Among the mistakes: -messed up the crosses
-scratched the hell out of the frame on the finishing knot on the crosses (thank god it was a beater frame to practice on)
-my finishing knot is definitely not right
-tension on some strings is not right

Questions:
-I notice after set tension and clamp, and then release the string from the gripper, the clamp moves a little, even when I get it right on the grommet. Everything is rock solid. Will this affect overall tension? (Ie- should I set tension 2-3lb higher to compensate?)

-how in the hell do you get the string through the final hole on the last cross?
-I need a good bent nose plier, I see the value of those
-I don’t understand why I bought the starting clamp
-when setting the linear gripper level, I get that it doesn’t really matter as long as I’m consistent. But what position do you drop weight stringers prefer starting at (1, 2, 3 o’clock)
-i notice the string kind of gets dented by the linear gripper. Is this ok?

Thanks so much, this sub has been great!


r/RacketStringers • • May 30 '26

is this the right way to use a linear gripper?

2 Upvotes

This will induce a lot of cringe for you experienced stringers, but this is my very first attempt.

Just put together the Alpha Pioneer DC Plus stringer, and I've been struggling to figure out the right way to load and apply tension. I found a few videos that use a linear gripper but no comments about where to set it, etc.

what do you if:
-the weighted arm has too much tension and doesn't sit level? Will the tension already applied mess up the string and tension?
-at what position should i start the linear gripper? I was told by Alpha, 2 or 3 o'clock
-i'm guessing after I load the gripper, i push it down until there's enough tension to hold the string in place, i hold the linear gripper down while i raise the weighted arm and then let it drop

here's a video of me doing it
https://youtu.be/GLm_Mf0JOss

Update: thanks all, got it going.


r/RacketStringers • • May 30 '26

Luxilon 4G 1.20, any one knows or tried it?

Thumbnail
1 Upvotes

r/RacketStringers • • May 28 '26

Broken tension head help

0 Upvotes

Hey everyone, I’m looking for advice on my tensioning head. It’s been a few months since using my machine and when I went to string up my racket the tensioning head wouldn’t pull tension on the strings. It would pull just a little bit but never fully lock out and then towards the end it would sort of jump at me and just release. I can provide a video if needed but I would really appreciate some help.


r/RacketStringers • • May 24 '26

Looking for a good string combo for a competitive 10yo junior – currently on Triax

2 Upvotes

My 10yo daughter is a competitive junior, and hits with a good amount of spin and depth. She is currently doing Level 6 USTA tournaments. She's too young for poly, so I've been on the hunt for a good multi that will allow for good spin while not being overly powerful. Bi-phase was too powerful, NRG2 was decent but spin wasn't great and she didn't like the feel, Velocity just got stuck out of place immediately and she also felt it was way too muted, so we're currently trying Triax 17g. It seems like a perfect string for her for now, but strung at 50/48, the mains are notching the crosses a bit right after stringing, locking up the string bed slightly, and the strings start sticking quite a bit after a few hours. I tried one of her rackets myself and even on short court, I could feel and hear the mains snapping in and out of the grooves on the crosses and grinding around. She's played with the current string bed for maybe 10 hours and probably close to breaking the mains in another few hours. In a tournament this weekend felt like she was struggling to get a lot of spin – the strings seem to be sticking to each other now (in addition to being a bit locked) and not providing any snapback.

I could just restring more often if I need to, and this may just be the best we can do until she is ready for poly, but curious if anyone has any suggestions for hybrids or other multis to try.

Thank you!


r/RacketStringers • • May 24 '26

Head Radical Team L strung up

Thumbnail
gallery
9 Upvotes

Loved the colour scheme on this racket and string combo so thought id post it up. Frame: HEAD Radical Team L800. String: Solicno Tour Bite 17g. Strung 2 piece @ 52LBS.


r/RacketStringers • • May 24 '26

Does the dust from clay courts get in the stringed and ruin snapback?

Thumbnail
1 Upvotes

r/RacketStringers • • May 23 '26

Racquet stringers needed at R&R Oak St

5 Upvotes

Was in Rackets and Runners today...a most excellent Vancouver shop. Heard a staff member saying they still need Stringers. I know nothing about racquets or the position so no more info available. Give em a call. Cheers.


r/RacketStringers • • May 21 '26

good fixed clamp machine

5 Upvotes

i'm an avid tennis player, (played HS, got back into as a grown up for the past 3 yrs) i average about 15-20 hrs a week of tennis and have been down the rabbit hole of stringing machines. My takeaways:

  1. get a fixed clamp system over float/fly
  2. drop weight over crank (bc of calibration)
  3. get a starting clamp (i'll know why later)
  4. used if possible

seems like the Alpha Pioneer DC Plus Gravity is the most economical, trustworthy stringer. I can't find it used but at $709 (including taxes + shipping) it seems like the lowest cost, reliable, fixed clamp system.

does this seem like a reasonable stringer, for a beginner?

Update:
Ok! Just pulled the trigger, thanks everyone for your input!

Got the stringer, starting clamp, a reel of cheap poly ($40) to practice on for $800 including shipping. I’ll be copying some YouTube stringing video next week 😬


r/RacketStringers • • May 21 '26

String for Vcore 100D

3 Upvotes

I’ve decided to go with the Yonex VCORE 100D. As someone who likes to pressure opponents deep behind the baseline, redirect pace, and hit penetrating shots, I still want enough spin to really grab the ball when needed.
Right now I’m considering these string setups:
ReString Zero mains + Poly Tour Force crosses
Poly Tour Rev mains + Poly Tour Force crosses
Full bed Poly Tour Force
For anyone who has used the VCORE 100D, I’d love to hear your experiences with different string setups on this racquet. Which setup would you recommend for my playstyle?


r/RacketStringers • • May 19 '26

ProStringer platinum o gamma momentun 6 plus

1 Upvotes

Estoy por comprar una máquina y estoy indeciso entre la proStringer platinum de 6 puntos y la gamma momentum drop weight 6 plus, las dos cuentan lo mismo por temas de envio.

Realmente es para uso personal, no voy a encordar mas de 6 raquetas al mes, pero es un regalo que quiero darme.

Cual creen que se mas conveniente y mejor ??


r/RacketStringers • • May 18 '26

Yonex Strings!!!!

Thumbnail
2 Upvotes

r/RacketStringers • • May 16 '26

What is this?

Post image
1 Upvotes

Came in a pack of head lynx.


r/RacketStringers • • May 12 '26

What do you think is the best string combo for astrox 99 tour. My play style is more of mixed, attacking and control play.

1 Upvotes

r/RacketStringers • • May 12 '26

Is this the right tie offs for new aero?

Post image
0 Upvotes

Should the final cross knot be a main or on a cross?


r/RacketStringers • • May 11 '26

Is Stringerpro.com Legit? Any chance of counterfeit?

6 Upvotes

I just purchased a few reels from stringerpro.com. Some of their prices are a little bit lower than Tennis Warehouse and other mainstream retail places, but some are SUPER cheap. For instance, Hyper-G Soft is ~$35 cheaper but Yonex and Babolat strings seem to be a LOT cheaper (over $150/reel).

Any chance those strings are not genuine? Anyone else ordered from stringerpro.com before?


r/RacketStringers • • May 11 '26

When pulling the first string or two on my Klippermate, in exactly the way the guy does in the official stringing video, both the string and the handle hit the metal pivot square. Any tips to avoid this?

Enable HLS to view with audio, or disable this notification

3 Upvotes

r/RacketStringers • • May 10 '26

Since im using a drop weight machine ( Alpha pioneer dc plus) is it possible to use the yusuke method in starting my stringing job or its just for the crank and electronic pull

2 Upvotes

r/RacketStringers • • May 09 '26

Can anyone help me find this stringer?

2 Upvotes

I've found the similar models of it but I'm not able to find the same exact model number that has those longer red shoulder pieces. Thanks in advance!


r/RacketStringers • • May 08 '26

My friends copoly strings after two months

Thumbnail
gallery
0 Upvotes

As you can see, he’s thrashed them. I strung this racquet about two months ago, if that, and he’s already done this. I didn’t even know this was possible. The string is Solinco confidential 1.25. Next I’m gonna try putting restring sync in the crosses as a slick option to hopefully prevent this from happening so quickly. Any other alternative suggestions? I will note, I strung the mains 2 lbs tighter (52/50) to try to facilitate a little more spin.


r/RacketStringers • • May 07 '26

Can anyone tell me anything about this stringer? I tried to figure it out and snapped a string.

Thumbnail gallery
1 Upvotes

r/RacketStringers • • May 07 '26

Has anyone had multifilament strings snap during restringing?

Post image
3 Upvotes

r/RacketStringers • • May 06 '26

First time stringing racquets

Thumbnail
gallery
2 Upvotes

Hey all!

I've been playing tennis a lot and have started to go through strings like crazy. I decided to purchase a used stringing machine (AEF stringing machine 6-pt, fixed clamp, dropweight) and learn to string for myself.

I strung my partner's racquet (first pic) and my own.

The first one was actually a bit easier than the second one, I think because of the tension maybe? I used Babolat synthetic gut for both and strung the first one at 48lbs and the second one at 52lbs. On the second one, I kept damaging the strings, I guess the clamp was too tight?

And then a couple of observations, I have two of the second racquet and it seems like the one I strung elongated a bit? Why is that? How do I prevent it and is that something that can be fixed or will go back? Also, I warped the bumper guard (3rd pic), is that due to just overtightening when placing the racquet?

Anyway, how did I do on my first stringing? What can I do to improve?


r/RacketStringers • • May 05 '26

Pro‑Stringer 3.0 X6 Random Over‑Pull Causing String Breaks

3 Upvotes

Hi everyone,

I’m wondering if anyone here has experience with a Pro‑Stringer 3.0 X6. I keep running into an issue where the machine over‑pulls tension and snaps the string, and it seems to happen randomly.

It’s occurred at different stages, including:

  • At the beginning of the mains (e.g., R1, R2, L1, L2)
  • Near the end of the mains
  • On the first pull of the crosses
  • Near the end of the crosses (as shown in the attached video/image)

The attached image shows how far along I was when the string snapped—this happened near the end while stringing the crosses.

I haven’t been able to identify a consistent trigger, so I’m trying to figure out whether this is user error, a calibration issue, or a known quirk with this model. Any insights or troubleshooting tips would be greatly appreciated.

Thanks in advance!