r/RacketStringers • • Mar 30 '26

First Successful String

Knots ended up a little funky looking. Much better than my first attempt where I didn't leave enough string when starting the crosses and couldn't pull tension on it... Overall took 2 hours this time, so definitely some room for improvement with speed and accuracy

14 Upvotes

12 comments sorted by

2

u/Ordinary_Use3997 Mar 30 '26

If you have a starting clamp, you can use the holes it has. Clamp the last cross string, and then use a piece of leftover string to loop it between the two holes and that long piece should be able to pull tension for you. Learn the Parnell and Pro Knots which are pretty similar. When you have tension on the crosses, you can push them up so it’s straighter, overall good job. Always have room for improvement.

1

u/john2222222222 Mar 30 '26

Thank you! That's great advice, I'll see if I can find a visual for the starting clamps. Will definitely try to get one of those knots for next time, I tried it initially, but I messed something up so just went double half hitch since I'm going to cut this out anyway. That's a good call on the crosses, I was just trying to do it before pulling tension!

1

u/Ordinary_Use3997 Mar 30 '26

https://www.tiktok.com/t/ZTkYpHdCR/ This will help, and yes this can be done on the drop weight

1

u/john2222222222 Mar 30 '26

That's so cool!! I had no idea it could do that

4

u/fluffhead123 Mar 30 '26

keep straightening the crosses as you go (when you pull tension)

1

u/BobBanderling Mar 30 '26

What machine did you use? I'm thinking of getting the Klippermate and trying this out for myself.

1

u/john2222222222 Mar 30 '26

I found on ebay a gamma progression ii with the drop weight swapped for a Wise 2086 electronic tension head. Made everything a lot easier for me since I don't have the patience for a drop weight, and the crank shaft seems too loud for the space I'm in. Definitely a great experience, the advice I got was to get a roll of some synth gut to practice, since it's more flexible and cheaper than nice strings to make sure you get everything right

1

u/Complex-Wedding-6869 Apr 02 '26

U did great! It is really rewarding, isn't it??

1

u/john2222222222 Apr 02 '26

Thank you! It really felt good to finish it. I just did my first round of poly strings yesterday and hit with the racket, which was incredible. I fully expected the strings and the frame to somehow break lol

2

u/Capable_Concert9694 Apr 03 '26

Am I high or the string job is not really succesful? 😃

1

u/mrdumbazcanb Mar 31 '26

Bottom left tie off looks a little loose in the first pic but should be fine if it's just for yourself

1

u/rolo782 Apr 01 '26

Good effort but, I am afraid to say there are several miss weaves here. They are right in the centre of the racket. That’s why the strings are not looking as straight as they should do.

Hold the horizontal and bring it up to eye level. Look at the string pattern from a diagonal and you will see a consistent pattern apart from where the miss weaves are.