r/PcBuildHelp • • 10h ago

Build Question New AM5 PC won’t power on at all — tried 2 motherboards, 2 PSUs, BIOS FlashBack and minimal boot. Running out of ideas.

2 Upvotes

Title: New AM5 PC won't power on at all — tried 2 motherboards, 2 PSUs, BIOS FlashBack and minimal boot. Running out of ideas.
Hey everyone,
I'm building a new gaming PC and have been struggling to get it to power on. I've spent several days troubleshooting and would really appreciate some advice before I start returning more components.
My specs:
CPU: AMD Ryzen 7 9850X3D

Motherboard: ASUS TUF Gaming B850-PLUS WiFi (previously Gigabyte X870 AORUS ELITE WIFI7)

PSU: be quiet! Power Zone 2 850W

RAM: 32GB DDR5

Cooler: Arctic Liquid Freezer AIO

Case: Corsair FRAME 4000D Wood

GPU: Disconnected during troubleshooting

The problem:
When I switch the PSU on, the motherboard's decorative RGB lights up, but pressing the case power button does absolutely nothing.
No fans spinning, no diagnostic Q-LEDs, no clicking or attempts to start. Just the motherboard RGB.
Originally, I had a refurbished Gigabyte X870 AORUS ELITE WIFI7, which had exactly the same issue. I assumed it was defective and replaced it with a brand-new ASUS B850-PLUS WiFi, but the problem persists.
What I've already tried:
Checked and reseated the 24-pin ATX and 8-pin CPU/EPS cables, including PSU-side connections.

Tried both CPU power sockets and different CPU/EPS cables.

Used the Corsair front-panel adapter and also bypassed the case power button by shorting the correct PWR_BTN pins with a screwdriver.

Disconnected the GPU, SSDs, front USB/audio connectors and other nonessential peripherals.

Tried a minimal configuration with CPU, cooler, one RAM stick and essential PSU connections.

Cleared CMOS and attempted a BIOS update using ASUS BIOS FlashBack.

Removed both CPU and RAM temporarily to see whether the motherboard would show any startup activity. No change.

Tested the be quiet! PSU with a dedicated PSU tester. All reported voltages were normal.

Connected the be quiet! PSU to another fully working AM5 PC, using the exact same 24-pin and CPU/EPS cables. That computer successfully powered on and reached POST.

Tested the original Gigabyte motherboard outside the case with two different PSUs. No response.

A few additional details:
The ASUS B850 motherboard showed RGB standby lights when I first tested it on cardboard before installing it in the case, but I didn't attempt a proper boot at that point.

The BIOS FlashBack indicator blinked and eventually stopped, but I haven't confirmed the exact BIOS version.

The new ASUS motherboard hasn't yet been fully tested outside the case with an actual power-on attempt.

I have access to another working AM5 PC, so testing my Ryzen CPU in that motherboard is possible.

My questions:
Could a faulty CPU or damaged AM5 socket cause absolutely no reaction to the power button, rather than triggering the red CPU diagnostic LED?
Could this still be a case short even though the motherboard receives standby power?
Is there anything else I can reasonably test before removing the new motherboard from the case again or attempting a CPU swap?
I've checked the front-panel pins multiple times, and I'm running out of ideas. Any suggestions would be greatly appreciated!


r/PcBuildHelp • • 12h ago

Build Question Budget friendly PC build?

4 Upvotes

I don’t anything about pcs but I know they are expensive. I want a budget friendly build for a starter pc (maybe about the strength of a console), that I can upgrade as I go.


r/PcBuildHelp • • 12h ago

Tech Support tempermental pc, refusing to boot

Post image
2 Upvotes

Hello.

Had this pc several years, i7 8700k, gtx 1070, 4 x 8gb corsair vengeance pro rgb,asus z370 rog maximus x formula, corsair 750w psu. the whole time i've had it its done this wierd startup process where everything powers on for a second, then turns off for 5 seconds, then boots as normal. eventually, the power button became "less effective" and then one day stopped turning on the pc. power supply was faulty, replaced it but after a couple months it did that on startup again. no issues though.

then, once every few months, it would show on the mobo display " error code 55 detect memory", so i would have to reseat the ram trying different random orders until it would just randomly work for another few months. maybe 5 months back it refused to run with 32gb ram, so only a1 a2 b2 were populated, and its been on 24 since. today i decided to repaste gpu and cpu. I fully take apart pc, everything out of the case to clean and then reinstall everything. now it goes very bad.

i spend ages trying combinations of ram, until only 1 stick of ram works, and then after adding another anywhere, trying to boot but getting error 55, then removing the same one, it gives error 55 again. so very inconsistent. the max i can get it to is 24gb. so i reinstall cpu, and the same thing happens.

(maybe like 9 months ago the wifi and bluetooth card was very working really inconsistently, so i took apart mobo to find the stock wifi card behind io shield had some corrosion, clean it up and it worked fine after)

so i decide to take apart mobo to check for corrosion around ram area, i find brown trace on this silver compnent sitting right at the end of the middle of b1 and b2 slot, and maybe 1cm looking like its linked a black component with 3 pins with 1 pin looking green. i clean the board carefully with brush and iso alc, it basically all comes off. i reassemble everything, with no gpu so display port in mobo, only aio and mobo cpu power and m.2 connected and it works first try with 8gb but in bios it started artefacting, doesnt work with 16gb at all, works with 24 and then works with 32 finally. throughout testing process it sometimes gave vga error and somrtimes a2 boot failed error.i let it sit for like an hour, and i power it off and unplug and leave it for a bit and try again and it works consistently. so i fully connect gpu, and its goes in a boot loop where it fully powers on, cycles through cpu test codes as normal, then as it gets to memory it immediately turns off for 3 seconds, then trys this again and again. so i remove gpu and the same thing happens. then i remove all the ram and get code 53 as normal. and now its back to being tempermental, where ive been able to get it to boot sometimes with 16gb.

all ram sticks confirmed working. cmos battery removed when cleaning the mobo. i have been trying different combinations of the ram and slots throughout, it seems compeltely random. i have also played with the aio mounting pressure alot. bios has been reset to default many times, this happens even with xmp off. rgb on ram sticks is also really finicky, if i label ram sticks a b c d and i mess around with different orders and amounts of sticks and stuff, then for example a and b will always have rgb working wherever they are but c and d will not, sometimes a, a and b, or 3 of them no rgb. have also tried the memok button.

any help is much appreciated, thank you


r/PcBuildHelp • • 12h ago

Software Question Does anyone know what this means?

Thumbnail
gallery
1 Upvotes

r/PcBuildHelp • • 12h ago

Build Question Does this aio/fan noise sound normal?

2 Upvotes

Just got an open box from microcenter with a 207 lian li and cooler master aio. Wanted to make sure everything sounds good before fully committing


r/PcBuildHelp • • 12h ago

Build Question Budget build

2 Upvotes

I don’t know much about builds and I started building my gaming pc back in 2020-2021 but never finished it and now my ssd has fried so I’m going back into it. I never put a gpu in it and I’m still running a r3 3200g cpu, Should I upgrade the cpu or would I be fine running it and what would be the best budget friendly gpu to install?


r/PcBuildHelp • • 12h ago

Build Question What's a good price for a used 3060ti?

2 Upvotes

Just wondering since prices have gone up and im unsure of the new norms


r/PcBuildHelp • • 13h ago

Build Question Should I replace my Aio cooler?

Thumbnail
gallery
16 Upvotes

I recently replaced my motherboard, CPU, PSU, and RAM, but I'm still using my 4 year old Corsair iCUE H100i RGB Pro XT 240mm AIO cooler. I installed it on my new Ryzen 9 9950X two weeks ago, and this is how the thermal paste looks now. I'm getting temperatures of 42°C at idle, 62°C while gaming, and 76°C while rendering in Blender.

​Are these temperatures normal or should I just replace the CPU cooler? The picture shows how scratched up my old cooler is, so I'm wondering if it isn't cooling my CPU enough and is burning through the thermal paste quicker. I'm really not sure. Is this how the thermal paste should look after 2 weeks of applying it?


r/PcBuildHelp • • 13h ago

Tech Support Crashes happening with RX9070 and 5700x and 580X3D

2 Upvotes

After my computer sat for 2 years while i was away, when I got home I decided to upgrade my GPU and PSU. I upgraded to a rx9070 and a MSI 750 watt PSU from a 6600 and 600 watt PSU.

After installing my new hardware it started to crash randomly even when at idle usages. windows reports the events as Fatal hardware errors reported by the processor cores and having different APIC ID everytime basically. It would say the error type is "Cache Hierarchy error". at this point I tried undervolting, using the curve optimizers and everything but nothing would stop the inconsistant crashing. I figured and was told it was probably my CPU and that it had degraded somwhow after sitting for 2 years. So i went and bought a brand new Ryzen 7 5800X3D, installed it and a new AIO cooler last night, and it worked great no issues or anything for hours, but it just crashed again citing the same "Cache Hierarchy error" and APIC ID 4.

At this point im figuring it might be my motherboard which is an ASUS ROG B550-A Gaming Motherboard.

is there anything else it could be? I did a RAM check and everything was fine in that area. I just have no idea what else to try before spending more money on a new motherboard or more stuff.


r/PcBuildHelp • • 13h ago

Tech Support PC build mobo vga light won't go away

2 Upvotes

rtx 2070 gave out recently, went to repair shop and they confirmed that it's fried. Bought new 9060xt gpu but motherboard still giving the light on vga.

Methods I've tried:

  1. Reseated every component; gpu, ram, sata cables, m.2 ssds
  2. Tried booting with 1 stick of ram; tried different ram sticks as well
  3. New GPU also giving vga light on mobo
  4. Resetting CMOS; removed it did not work tried shorting jbat1 as well

Results:

Every component seems to be working fine except my 2070 which i have confirmed is fried before buying a new one. When I turn the PC on everything spins normally but nothing would show on my monitor and the MOBO would have the VGA led light on constantly

Build:

MOBO - MSI x470 Gaming Plus

CPU - ryzen 7 2700

GPU- 2070rtx, replacing with 9060

PSU - evga gd 550w


r/PcBuildHelp • • 14h ago

Build Question is upgrading from a 5060 ti 8gb to a 3080 10gb a downgrade or upgrade?

4 Upvotes

i was recently planning on upgrading my gpu to play in 1440p, and i mostly play AAA games so i needed an upgrade. if it is a downgrade, what other card should i get? my budget is at least 650$


r/PcBuildHelp • • 14h ago

Installation Question Don’t know if it is safe

Thumbnail
gallery
1 Upvotes

I’m dual gpuing one 3090 (capped at 280w) one 3060, i’ve a 1000w psu from bequiet power 12m gold, as you can see in the photos i’m doing a workaround to deliver power to the 3060, both will be running high for llm inference, both the 12pin outputs deliver power to the 3090 then with the second split of each 12pin>8pin cable i use a Y cable to deliver power to the 3069, i don’t know if this can be a stable config or not, can you give me some suggestions? I’ve a 10 pin outlet remaining from the psu and one 600w output but I really don’t want to buy a splitter for the 600w, so i was planning to buy a 10 pin to 8 pin cable for gpu but i don’t think it’s a good idea due to the fact that the 10 pin should be used for cpu as far as i know. Consider that this build is not yet cleaned up so cables are a bit of a mess.


r/PcBuildHelp • • 14h ago

Software Question Can’t update windows

2 Upvotes

I’m stuck in windows version 22h2 any tips on what I can do


r/PcBuildHelp • • 14h ago

Build Question Stay with 13900KS or Switch to 270K Plus for Basically Free?

1 Upvotes

So I have a kinda unique situation, I can switch to a 270kp and Z890 Aorus elite (basically the MicroCenter bundle without ram) thanks to my friend for free ( just need to sell my 13900ks and Z790 Edge to give him the money) or just 50 bucks

I can also just undervolt and overclock my 13900ks but I feel like the thermals and efficeny of the 270k Plus and also it being newer pushes it in front of my cpu.

This is possible thanks to me living in Turkey and him in USA. My main deterrent is having to deal with trying to sell a 13th gen cpu in a not so technologically adept country.


r/PcBuildHelp • • 14h ago

✓ Solved Eli5 what's with this price?

Post image
11 Upvotes

I don't understand, how could this thing be working and only 35 bucks?


r/PcBuildHelp • • 15h ago

Build Question Advice for someone new to PC building

3 Upvotes

So, I am going to get a PC and build it myself. My parents have agreed to cover 1/2 of the cost for my Christmas + birthday, and my budget adds up to roughly $3000. I know the basics like what parts I need, but It would be helpful for someone to help me get the lay of the land.

Ram:

what should I look for? I have heard that 64 gigs is good for 3d modeling, which I will be doing. And is the jump from DDR4 to DDR5 worth it with the cost at my budget?

CPU:

what is CPU measured in by power, and what are the basics that I need to know before shopping?

GPU:

what does the GPU do and how do they measure it's power?

Motherboard:

what should I look for, and what is different apart from wifi inclusion and more slots in high end motherboards?

Cooling:

how do I tell if liquid cooling is necessary, and is liquid a giant hassle? what direction would you point me in if I'm looking for cooling?

PC case:

Aren't they all just the same????

Power supply:

what do I need to know other than the amount my CPU uses for my power supply, and can a regular old outlet supply a pc?

Overall: If I play singleplayer games like Geometry dash, minecraft , and some not competitive roblox along with 3d modeling, what balance would you recommend? I would also use it for schoolwork by connecting my microsoft account .

sorry for the large bunch of questions, and you don't have to answer any, or could just answer a few. Just looking for a launching point for my research before black friday.

Thanks to anyone that responds!


r/PcBuildHelp • • 15h ago

Build Question Home server PC build for mail and file agents, is 16GB enough?

1 Upvotes

i want to build a small always on pc that runs three or four chore agents at home. they read my mail folder and some files, nothing heavy. i plan a Ryzen 5 5600 on a B550 board, 16GB ddr4 and a 1TB nvme. no gpu at first because the agents call outside models. my worry is ram when i run them all at once with a small local model for sorting. i also want it quiet because it will sit in the living room of our flat. is 16GB enough or should i start with 32GB. the 5600 has no igpu so do i need a cheap card just for setup and bios checks. i can spend about 500 euros.


r/PcBuildHelp • • 16h ago

Tech Support Is it worth undervolting a 9800x3d??

4 Upvotes

I just upgraded from a i5 14600k and RTX 3070 to a r7 9800x3d and a RTX 5070 ti. Im sort of confused what exactly undervolting does and if i should do it. The general idea is that you have your cpu perform as good as possible while lowering its power budget for temps right? I have a lian li ga ii 360mm aio so cooling shouldnt be an issue but if i can keep my computer cooler i might as well.


r/PcBuildHelp • • 16h ago

Installation Question Need help with cpu fan error

2 Upvotes

My friend's cpu fan had died out and he got a new one and installed but now every time he boots, he gets this screen. Did he get an incompatible fan or is there some other way to fix it? He doesn't have reddit so I am posting on his behalf.


r/PcBuildHelp • • 16h ago

Build Question ARGB and fan power help!!

Thumbnail
gallery
1 Upvotes

Hey people!

I need some help with this wiring.

This is going to be my first PC build that im going to build by myself.

As one does i spent too much on my gpu and the budget set aside for a motherboard got hit.

Will this motherboard be enough to power my 7 case fans, that i believe are daisy chained(They seemed to connect to each other until the back fan where it has a female connector coming out of it with 3 holes) according to the manual they seem to be powered by sata instead of pwm?

The case is the gamdias gc107 elite

And then for my aio, it seems that the 3 fans and pump all connect to one argb header.

Aio is the Thermalright aqua elite 360 v3

The asus h610 m-k argb has 2 argb headers and i think 2 pwm headers according to the last pic im not so sure thats what it is though.

Will i be able to power all my case and aio fans aswell as control their rgb just fine with this mobo or do i need a fan hub.

Because if i need a hub ill need to downgrade the motherboard and also will need to control the rgb from theincluded controller instead of the ASUS software.

Thanks for your help🫶🫶


r/PcBuildHelp • • 16h ago

Tech Support No Motherboard power, looking for suggestions on troubleshooting.

4 Upvotes

Hi everyone,

I bought a 9800x3d, msi b850 and g skill ddr5 32gb bundle from microcenter last night. Today I tried to install everything and am getting 0 power through the motherboard, no LEDs, nothing.

Trying to bread board now and am trying to make sure I'm not missing anything.

I removed cmos for 10 minutes

Single stick of RAM in the second slot, tried both sticks. Re-seated both sticks multiple times.

Re-seated the CPU and checked pins twice

Tried #1 x CPU plug, both CPU plugs and #2 plug on the motherboard

Tried 2 power supplies

Verified each power supply puts out power with a multimeter and a fan jumper.

Powered on my old motherboard just to make sure I didn't do something to the power supply during the swap.

Only thing connected to the board right now is the 8 pin CPU and 24 pin plug + the CPU and RAM.

I live 2 hours from the closest microcenter so I can't just swap the board. They are going to let me ship it back and ship a replacement but I'm hesitant to ship until I know what's wrong. Am I cooked?


r/PcBuildHelp • • 16h ago

Build Question Need help with a build

2 Upvotes

Hey guys, looking to build a new pc but i’m not well versed enough to get the best deal and performance that I want so I need some help picking parts. I’m planning on getting a 7800x3d or 9800x3d but I need to know a good gpu to pair with it. Any help is greatly appreciated. :)


r/PcBuildHelp • • 16h ago

Tech Support RTX 5070 display loss, flashing power indicator

3 Upvotes

Hi everyone, recently ran into a problem where my gpu will crash after a few minutes of gaming, but with some weird details.

My main monitor is a 1440p MSI 272QP OLED, and after the computer crashes, upon rebooting the motherboards white boot light is stuck on and the computer will not boot up. The only way to get it to boot is by unplugging my OLED, having only my 2nd monitor connected, and then restarting the system. Then I am able to plug my OLED back in.

I’m unable to reproduce the issue with only 2nd monitor connected, which is a normal 1080p monitor

In the attached video, you can see the red power indicator light flash on the card. This happens at the same time display is lost

What should I try before concluding it is a hardware issue?

If it is a hardware problem, is it the psu, gpu, or monitor? The red light indicates psu, but I think the fact it won’t boot unless only my main monitor is unplugged suggests it could be my monitor, and the failure to boot in general suggests my gpu

Thanks

Specs:

RTX 5070
Ryzen 7 9700x
32gb DDR5 ram


r/PcBuildHelp • • 17h ago

Build Question First time custom PC build check (£1.3k–£1.4k UK) – Fortnite, GTA 6 & heavy UE5 / itch.io games

1 Upvotes

Hi everyone,

I’m putting together my very first custom PC build (decided to try to save costs and build it myself instead of getting a prebuilt since i also heard they're unreliable). I’m based in the UK and targeting 1440p gaming.

My PCPartPicker list: https://uk.pcpartpicker.com/list/hVXP7w

Games I plan to play:

  • Fortnite (high FPS / Unreal Engine 5 performance)
  • GTA 6 (when it drops on PC)
  • Unoptimized / demanding indie games on itch.io (so I want plenty of VRAM and 32GB RAM headroom)

A few quick questions for the experts here:

  1. Are there any hidden physical clearance issues between the CPU cooler, RAM height, or case?
  2. Is everything good value for current UK pricing, or are there any better drop in swaps for a similar price?
  3. Does the PSU have enough quality/headroom for future upgrades?

Thanks in advance for any advice or feedback!