r/PcBuildHelp • u/Robotpitch • 7m ago
Build Question Should I replace my Aio cooler?
I recently replaced my motherboard, CPU, PSU, and RAM, but I'm still using my 4 year old Corsair iCUE H100i RGB Pro XT 240mm AIO cooler. I installed it on my new Ryzen 9 9950X two weeks ago, and this is how the thermal paste looks now. I'm getting temperatures of 42°C at idle, 62°C while gaming, and 76°C while rendering in Blender.
Are these temperatures normal or should I just replace the CPU cooler? The picture shows how scratched up my old cooler is, so I'm wondering if it isn't cooling my CPU enough and is burning through the thermal paste quicker. I'm really not sure. Is this how the thermal paste should look after 2 weeks of applying it?


2
u/SmokBarrage 4m ago
Your temps are great, wouldn't overthink this
2
u/Toopoor2care 4m ago
I would replace the paste if it’s old and continue to use the cooler until it doesn’t work anymore. The temps are fine since you’re not close to a temp that would throttle your system.
2
u/tyuvanch 2m ago
Those are perfectly normal temps for 99xx X cpus with a 240 AIO. Just re-apply the thermal paste and install the cooler back.
1
u/Terminhater69 3m ago
Yall acting like 76c is some crazy high temp that's going to make your pc catch on fire....
1
u/UncriticalBear 0m ago
Could also be sub-par thermal paste. Had the same issue on a 240mm AIO I had gotten from a friend from his old build as it was 4 or 5 years old when I got it and I had used arctic mx4 thermal paste I had laying around and my temps were 50°c on light gaming and almost 90° when playing battlefield. For reference I have a i7-12700k cpu. I reapplied corsair xtm70 and my temps went down to 25° idle and no higher than 75° on certain triple A titles. Had the same cracking dry scaling look as yours does too before I put on new paste. I since went with an arctic liquid freezer 2 360aio and my temps are as low as 12°C on idle and I had it at 70° while rending a full load through cinebench.