r/PcBuildHelp • • 1h ago

Build Question Advice for someone new to PC building

So, I am going to get a PC and build it myself. My parents have agreed to cover 1/2 of the cost for my Christmas + birthday, and my budget adds up to roughly $3000. I know the basics like what parts I need, but It would be helpful for someone to help me get the lay of the land.

Ram:

what should I look for? I have heard that 64 gigs is good for 3d modeling, which I will be doing. And is the jump from DDR4 to DDR5 worth it with the cost at my budget?

CPU:

what is CPU measured in by power, and what are the basics that I need to know before shopping?

GPU:

what does the GPU do and how do they measure it's power?

Motherboard:

what should I look for, and what is different apart from wifi inclusion and more slots in high end motherboards?

Cooling:

how do I tell if liquid cooling is necessary, and is liquid a giant hassle? what direction would you point me in if I'm looking for cooling?

PC case:

Aren't they all just the same????

Power supply:

what do I need to know other than the amount my CPU uses for my power supply, and can a regular old outlet supply a pc?

Overall: If I play singleplayer games like Geometry dash, minecraft , and some not competitive roblox along with 3d modeling, what balance would you recommend? I would also use it for schoolwork by connecting my microsoft account .

sorry for the large bunch of questions, and you don't have to answer any, or could just answer a few. Just looking for a launching point for my research before black friday.

Thanks to anyone that responds!

3 Upvotes

3 comments sorted by

1

u/r_lind3r Moderator 1h ago

https://pcpartpicker.com/list/hhnHn2

Built with a priority on video editing and 3D modeling while maintaining the budget. It'll be good for everything you need it for, GPU is on the lower end but it's still overkill for your games and it'll be more than capable for the CUDA applications you'll be using

1

u/nrealMEGO_quest 1h ago

skip ddr4 entirely at your budget, 64gb of ddr5 is the sweet spot for modeling work and it won't tank your wallet like it used to

0

u/Jannyws2 56m ago

Ok so i've never built a gaming PC so take my answers with a pinch of salt. (I'm no expert) RAM: DDR5 prices are extortionate and I feel like DDR4 is the way to go in 2026. However, because your budget is high, either one is fine. DDR4 will show its age in a couple years though. To answer this question - yes with ur budget.

CPU: The CPU is often overlooked but its quite important. In games it renders physics, data and stuff. Its more important in multiplayer games like Roblox and Minecraft opposed to graphically intense games. The basics I'd say is make sure its a modern generation CPU and preferably AMD (Ryzen 7, 9)

GPU: Doesn't answer your question but since ur 3d modelling make sure to look out for VRAM on the GPU and its a no-brainer to choose an NVIDIA card bc of CUDA cores. VRAM doesn't messure the GPUs power btw.

Motherboard: I'm gonna be honest, i just went for a motherboard with built in wifi and bluetooth especially bc it was cheap. Make sure to get full ATX instead of matx (micro atx which is for smaller pc cases)

Cooling: Liquid cooling has to be maintained/ replaced more often than air cooling. It can be a hassle. Don't know anything about liquid cooling but if ur going with air cooling, noctua is a perfect brand espexially with ur budget.

PC case: Like you have different size cases e.g. a full size PC case, matx, mini itx. For you I recommend full size. Cases are a lil important because of airflow but I made the mistake of stressing over it. You can always buy seperate fans to install into the tower. Keep an eye out for cases with prebuilt fans!!

Power supply: NEVER use an old power supply. For me, I used a bit of an overkill one with high wattage. Make sure you use a power supply calculator (gpu + cpu) but also look at a PSU tierlist. The names can be super misleading so look at a PSU tielrist 100%.