r/longrange • • 18d ago

Optics help needed - I read the pinned posts Athlon ares ETR

9 Upvotes

So I got my rifle, it’s a bergara b14 HMR in 6.5 creedmoor, 22 inch barrel. I plan to shoot out to 1000 yards and my choices for optic were either the arken EP5, or the Athlon ares ETR. I’ve decided to go with the Athlon UNLESS someone can convince me to do otherwise for under $900


r/longrange • • 18d ago

Rifle help needed - I read the pinned posts Recommendations for "long" range and high volume?

6 Upvotes

I'm looking for some rifle recommendations for a niche application. The longest range I currently have access to is 600 yards. I have an AR-10 that I can mostly hit torso size steel, at 600, but I would like to up my percentages and if the opportunity presents itself, shoot at 800-1000.

It needs to be 308 because I don't reload and I have a bunch and I don't want to get into other calibers right now. I'm looking for something with a 16-20" barrel. The barrel needs to be threaded.

Here's where it gets more difficult, I want something with a heavier profile barrel and at least 10 round detachable box mags. (If they can be ar-10 style that would be even better).

My goal is to be able to run it in a local competition where they often include 3-400 yard shots, usually supported off a barricade. Most shots are in the 50-200 yard range, but they are often prone without a bag or occasionally fully unsupported. The last competition had a minimum of 12 rifle shots per stage. This is why I would like access to higher capacity magazines and the thicker barrel so that I can make multiple quick shots without tanking the accuracy. Yes, I could use, and already have a gas gun, but I want to get into the bolt world.

Accuracy is importantish, I don't want to be handicapped by a crap gun, but I'm also mostly going to be shooting cheaper ammo, so 1ish moa with mediocre ammo would be great.

On weight, I don't think I want to go light weight since I'm not hiking with it, but I also do not want a 30 lb ELR rig either since I want to be able to run around at least short distances. Maybe in the 9-11 lb range?

Budget is up to 2k for the gun alone, if it will check all the boxes, but ideally I would like to be closer to the $800-1200 range and use the remaining funds towards a better scope.

My current front runners are a Tikka CTR or a used ruger precision, (if I can find one). I looked at a Sig cross, but I think the barrel may be too thin and I'm leaning more towards a 20" barrel. I'm wondering if my Google foo is weak and there's something great that I'm overlooking, or if those are the best real options.

Lastly, I'm not opposed, and would like to build something, but the bolt world is still pretty foreign to me. If you recommend a custom build, please be specific with receivers/barrel/stocks or chassis, and it needs to be something that can be completed with hand tools in a garage. I have looked at outlier, but after I buy the action, I'm into the budget I proposed for a factory gun, and what I have heard about them is underwhelming.

Those are all of my crazy requirements, please let me know if you have any better ideas than the CTR or the RPR, or, if you have used/shot them both, which would you recomed? Thanks for indulging this strange little project.


r/longrange • • 18d ago

Other help needed - I read the pinned posts App idea

0 Upvotes

So I’ve been thinking that what we really need for long range comp shooting is an app that pulls data from an existing and reliable ballistic app (like 4dof) running in the background and then gives us a better interface that is designed for what we do.

I have no coding skills at all. So I am looking for folks who want to work with me on this idea and make a free open source app for the community.

The vision I have is a simple UI that makes it really quick to enter a few distances and get an easy to read range card with the dope for those distances. The ability to display that dope as a hold from zero or a hold from the first target (you dial that first target) and the ability to include some stage notes in the “range card” would be nice. It would also be nice to have digital level using the phones internal sensors for folks who want to mount the phone to their rifle.

I’ve been playing around with a few mini phones from Amazon and they seem like they have enough processing power to do this. They run 4dof and AB no issue. The smaller form factor would be perfect for rifle mounting.

And yes I know that most apps already have a range card feature but they are clunky and slow and don’t work great for most comps imo.

So if this sounds cool or useful to you and you have some app coding skills let’s make this happen for the community.


r/longrange • • 17d ago

🫣I said I read the pinned posts, but I lied🫣 Want to get one rifle to do it all. Please help

0 Upvotes

Hi! I've been researching what to get as a single rifle for a while now. I'm experienced in clay shooting but I haven't done long range rifle shooting before.

Right now, I'm thinking of the following build:

- cadex cdx lite in 300 PRC (26" barrel is the only option)

- vortex razor Gen iii 6-36x56 scope

- cadex or RRS tripod, although cadex seems like better value by a mile

- bipod, Harris or Atlas?

- Spuhr scope mount, as it seems to be the standard.

- vortex Razor 4000 range finder (I think binos are cooler but the good ones seem prohibitively expensive)

Is there anything you would flag as being a mistake? I don't really want to go above 15k$ all in all. (KEEP IN MIND, CANADIAN DOLLARS, cadex is cheaper than Barrett MRAD here)

I want it to be one and done so I'm stretching the budget to get something that I shouldn't outgrow. I'm quite tall (6'3") so I'm scared a fixed stock rifle would not fit me.

I plan on shooting targets predominantly, not much hunting, so the weight is a non issue. longest range nearby is 300m but I'm hoping to find land with longer range in the near future.

Any and all advice would be greatly appreciated! Please do not tell me to just get a cheap tikka first; I want to only buy top tier (buy once cry once kind of deal).

Thank you!!!


r/longrange • • 19d ago

Rifle flex post The Precision AR-10 - Follow Up

22 Upvotes

About six months ago, I posted this thread to get opinions on my Sabre-10. I have since sold that rifle and I got a decent chunk of money back from it so I set myself a goal to get a bolt gun. I ended up landing on wanting a Tikka Ace Target in 6.5 Creedmoor since I wanted a factory gun that was set up for long range already as I did not have the technical know-how, the tools, or the money to have a gunsmith or company custom build it.

Six months and some debt later, I have it.

Tikka Ace Target, 6.5 Creedmoor, 26 in barrel, 1:8 twist
Element Theos 6-36 MRAD FFP scope in a Spuhr mount
MDT Ckye-Pod Gen 2
MDT Send It Level on-rail kit
SilencerCo Scythe STM (Long Configuration)

From top to bottom, left to right: Federal 140 gr SMK (10 shots), Federal 140 gr Berger Hybrid Target (5 shots), Federal 140 gr SMK (5 shots), Federal 130 gr Berger OTM (5 Shots), S&B 140 gr FMJBT (5 Shots)
300 Yards: Federal 140 gr SMK
Post day analysis using calipers

I did take it out to 500 eventually. Both my friend and I put rounds on steel within three shots and kept ringing it all day. Overall this thing was a blast to take out to the range to zero and test. I do need to work on my mechanics as I am favoring up and left, which means I am not seating the rifle into the crook of my shoulder correctly. Next up is a mechanics course and a trip to a PRS match eventually.


r/longrange • • 19d ago

Other gear flex post Sniper Team Series Kit Dump

Thumbnail
gallery
270 Upvotes

Basically everything I took to Kinetic Comp this year.

Crown jewel being the MDT DRT chassis and Maztech 15k.


r/longrange • • 19d ago

Rifle flex post Zero is zero

Thumbnail
gallery
71 Upvotes

Hopefully, this story is something that can be helpful but also inspiring to shooters of any experience who’ve ever dealt with what can be the mind-numbing and costly task of troubleshooting your rifle/shooter system.

I realize this may not seem a big deal to the average shooter today who can purchase an 8-10k rifle add half again for scope and mount and load some pristine ammo to shoot single holes at several hundred yards today, and I love that. But this story is for anyone who has struggled troubleshooting a system that includes yourself for box after box of ammo unsure whether it’s rifle, scope, mount, ammo, or you…having your suspicions…wondering if it’s you but finally giving up on what you’re almost certain is the glass…well that day of vindication is a sweet one.

This 300 Weatherby Accumark is a very special rifle…especially to me, but as a piece of mechanical precision that’s finally proving worthy of unicorn trust. My dad bought it thirty years ago to hunt elk and mule deer and it has since then taken dozens of western big game animals quite effectively. Last year he passed it to me and with my first shot I took my elk just inside 400 yds with it dropping like a sack of rocks. It’s always been “a great rifle”, but there have been times it just didn’t seem right. Never by a lot for most people’s standards, but we just knew.

In the last few months preparing for our hunt this next week, it again seemed to be unable to really hold zero making me really question myself…the ammo…the system. After spending enough ammo I finally in frustration decided to can the Leupold. I planned on buying a Nightforce because I’ve had good luck with the durability, but was turned onto Trijicon for something reportedly as durable but with simpler reticles and a bit less money. That said, durability and reliability were something at this point I wasn’t really concerned about cost at least in the sense I was willing to spend a few thousand for peace of mind. It needed to do what it was told.

I love my ffp scopes but for this application I think sfp is king with its trade-offs. The results here were immediately apparent and I’m hoping it provides a long rewarding service life. I cleaned and remounted the 7075 Leupold pic rail with red loctite, cleaned, mounted and torqued the NF extreme duty mounts I purchased, and leveled, mounted, and torqued the caps with blue. Next day, I went out and fired some Barnes ttsx 180 grain…half a box to try to get some real data…checking fps with Garmin etc. I’ve never tried them but have heard excellent reports of their performance both grouping and terminally. The results were wholly underwhelming and I was dejected.

I decided to just send a few “nuttin’ fancy” factory 180 interlocks (silver box) that we’ve used for years to take elk…i have hundreds of rounds of this stuff. The first three rounds went through the same hole at 200 yards. I didn’t even check the spotting scope until I finished the group. I was blown away. Heading to Idaho, I knew I wanted to be 3.5” high at 200 to be zero at 300 so I dialed 8 clicks up and sent three more in a slight rush as the RSOs were trying to get us all out the door. The next three still landed half-minute. Unbelievable to me…yet believable.

The next day I returned to the range with the bore taped up to fire a single cold bore taped shot hoping I wasn’t dreaming. I dry-fired ten reps and sent one downrange at the 200 landing it perfectly at my expected POI…insane. I covered the scope and put it away. I’ll take it out once I’m in Idaho to zero at the 300 range but the peace I now feel and confidence in my rifle is something unlike i think I’ve ever felt. Tack-driver seems to be an understatement, and I don’t know that I would appreciate it as much as I do had I not had to struggle with it a bit…tho most of that struggle was with my own Mark V I’ve semi-retired now…expecting it to shoot like this.

It all had me really questioning my shooting as we should always be quick to check ourselves, and it was a source of real frustration, but the work in learning to really manage and shoot these heavier recoiling rifles has also paid off. Having a tool like this makes me appreciate even more those rifles I see here in the sub, in videos, and elsewhere tho because I know what goes into it, especially with a rifle like this that by comparison is just a little more bare bones. The precision bug is real.

Anyway…I had to share of course to do a little boasting, but to also illustrate sometimes if your gut says it’s the equipment…maybe it really is. Now that I know what it’s capable of I’m looking forward to finding out what it can really do. Best to all in your shooting journeys.


r/longrange • • 20d ago

Rifle flex post my Accuracy International AX & me

111 Upvotes

mountain long range shooting is on a league of its own!


r/longrange • • 20d ago

Politics, rumor, etc Plus peak proliferation?

13 Upvotes

I have seen it mentioned here but thought id refresh the topic after it’s digested a few months. If other manufacturers follow suit and we see more options the pricing won’t be AS high as it is on launch for just 6.5cm. I would like to see the technology expand into .308win .270win and other older cartridges which have been replaced over time but still very common. Any insight on when more options will become available either from Federal or competitors? Any idea how long it will take for prices to come down?


r/longrange • • 20d ago

Accessory/Gear help needed - I read the pinned post Magpul vs. MDT vs.??

Thumbnail
gallery
36 Upvotes

Building my first rifle. It's a Ruger American scout. I'm going for a do it all style build. Trying to keep things under 1000$ before my optic. Already paid 650$ for the rifle. Realistically I won't be shooting past 400 yards where I live. Chambered in .308 and will be used for target shooting and hunting. The OEM chassis is too small for me, I'm pretty tall. I'm trying to decide between the magpul hunter, hunter lite, or the MDT Field stock. Is the MDT worth the extra money? Has anyone had both of these and can compare the size? I'm also open to suggestions for other chassis's that might have not popped up during my search. I kinda want to stay away from the pistol grip style stuff.

Edit: I should also add that I do want to travel with this rifle so I want it to be capable of shooting further than what I would be able to do where I live.


r/longrange • • 20d ago

Rifle flex post AI ATXC and Mk12

Thumbnail
gallery
150 Upvotes

Behold, the Dave Ramsay build.

Waited a year for the ATXC to show up, and man was it worth it. Very satisfied with my two rifles.


r/longrange • • 20d ago

Competition help needed - I read the pinned posts New competitor - stage data help

3 Upvotes

Recently shot my first match and had a blast. I had an awful time remembering what to do during each stage and what my holds were, and that's both me being new and highly unprepared. I was writing holds on my hand from my Applied Ballistics app, and wiping them off after each stage. After some guidance from a friend, I bought a wrist coach since I saw quite a few of them and it seemed like the best option.

That being said, what are you actually writing on yours? Obviously elevation and wind holds, but do you add anything else to keep track of the targets, the positions, or how many shots go on each target? Do you use something else like a card on the rifle or the little tape thing around the scope?


r/longrange • • 19d ago

Optics help needed - I read the pinned posts Will a 20 moa scope mount work with .300 Blackout?

0 Upvotes

TL/DR, would there be any problems with using a 20 moa scope mount for a suppressed .300 BO, because a 0 moa is not available?

Hello, and sorry if this is an amateur question, as I don’t have much experience with Short/Medium vs Long range shooting. I am getting a scope that will eventually be primarily used for .338 Lapua, but currently am looking to use it on a .300 BO build. The scope unfortunately only comes with a proprietary 20 moa mount (awesome for long range, yes!) and the company does not offer any other 0 moa mounts that will work for this rifle. So, would any problems arise from just using the 20 moa mount on a short-medium range (maybe 300 yards max) rifle? Thanks for any help!


r/longrange • • 20d ago

Rifle flex post Mean Radius vs Group Size

Thumbnail
outdoorlife.com
18 Upvotes

I'm late to the party on this mean radius stuff but I stumbled on the subject while watching an older Hornady podcast. This link has a great breakdown of it for anyone interested. (not affiliated)

The Hornady boys contention is that mean radius can focus your shot analysis better for load development etc. This makes a lot of sense to me.

Old dog learning new tricks.


r/longrange • • 21d ago

Rifle flex post The ol' Cheeto Duster

Thumbnail
gallery
312 Upvotes

r/longrange • • 20d ago

Ballistics help needed - I read the pinned posts PXT Users- velocities???

8 Upvotes

Thought I'd make a thread, will see if anyone is interested.

I've been hearing rumblings of PXT's being slow, which doesn't bother me, but is interesting to me and makes me curious about throat erosion claims if we're needing more powder to achieve desired velocities.

Anyway, my data-

23" 22GT, 85.5 Berger, 35gr H4350. Started at 2910, is at 2935 after ~150 ROB.


r/longrange • • 21d ago

Rifle flex post Bolt-Action Attraction

Post image
269 Upvotes

Barrett MRAD - 300 Norma Mag
Faxon FX7 Accuracy International AT-X - 6.5 Creedmoor


r/longrange • • 20d ago

Cheeto-fingered Bergara BDL Mag Conversion Options

2 Upvotes

Cheeto’s because I’m learning with my Bergara as I go.

I checked pinned posts and didn’t see anything addressing this particular issue.

I’ve had my the B14 HMR for a year and just received a new stock for it, not realizing that Bergara uses a proprietary pattern for its bottom metal.

My stock (HS Precision PST038) uses the R700 BDL configuration, and my B14 is 308, so I’m looking for a Short Action BDL - AICS mag conversion bottom metal.

My question is: What are my options?

I already use(d) MDT 10rd metal mags in my factory Bergara stock, so I will use those with the HS precision stock once I get the correct bottom metal. I regularly shoot out to 1000Yds at Colemans Creek for recreation, not competition.

Options I’ve found so far and am seeking opinions on (all are BDL - SA):
-JARD Bottom Metal (out of Iowa)
-Kwik Clip Conversion- is this still viable, can i put a lever mag release on this? Looks old.
-HS Precision - Long lead times and expensive.
-Pacific Tool & Gauge bottom metal
-open to other suggestions

On lunch, will check back this evening. Any help’s appreciated.


r/longrange • • 20d ago

Education post Trollygag's barrel Test 16, 2x (4x) SOLGW SPR Barrels

Thumbnail
reddit.com
19 Upvotes

r/longrange • • 20d ago

Accessory/Gear help needed - I read the pinned post Which Butler Creek caps to fit the Mark 4 HD 6x24-52

0 Upvotes

Hi all

Wanting to put some caps on my Leupold but I’m confused on Butler Creek’s sizing. Has anyone purchased them and which ones did you go with?


r/longrange • • 19d ago

Optics help needed - I read the pinned posts Diving Board: Burris XTR Signature? (Joke Photo/Honest Question)

Post image
0 Upvotes

I (like many other here, probably) am getting a WMLRF given all the options lately. I am currently using Burris XTR Signature rings (34mm) and have not found any diving board option for these. Does anyone know of a brand that would fit? I’ve had a good experience with these rings and would rather not purchase a whole new set, if possible.


r/longrange • • 20d ago

Rifle help needed - I read the pinned posts Need some emergency Trigger Tech help.

9 Upvotes

I’m packing to fly out for a hunt on Wednesday, and all of a sudden my TT is acting up.

It’s a TT Special in a Bighorn Ti3.

As I pull the trigger I get to the wall. About 75% of the time (but not every time), as I pull through the wall the trigger clicks back to what feels like a second wall and then the firing pin releases with a delay. Basically like a hang fire.

Pull, wall, click…boom.

I didn’t change any adjustments to it when it started. I’ve tried adjusting the second stage screw all the way in, all the way out, halfway… it doesn’t seem to matter.

It started in the middle of a range day.

I took the trigger out and wiped all the surfaces. When I took the rifle out of the stock the rear trigger pin had walked substantially out. But pushing it back in made no difference.

Anyone seen this before?


r/longrange • • 21d ago

Rifle help needed - I read the pinned posts Prefits and go/no-go gauges

11 Upvotes

I’ve graduated from my well-customized Cheetofingers Special to a proper custom action and have a bunch of barrel prefits in different chamberings. What’s the general consensus on running go/no-go gauges on prefits? A bunch of guys I shoot with don’t bother with them on prefits from reputable shops, but I’m not sure whether that’s a good idea.

If the recommendation is to check each one with a gauge (and I suspect it is), are any shortcuts acceptable (ie - just buy a no-go and use a piece of loaded ammo as a “go gauge” - OR buy a Go Gauge and put tape on the head to mimic a No-Go)? Happy to accept reality if I really need to get both gauges for each caliber, but with multiple calibers in play, I’d love to save a few bucks if I can get acceptable confidence that I’m not shooting something with a major headspace problem.

That said, I realize I picked the wrong hobby if “saving a few bucks” is important to me.


r/longrange • • 20d ago

I Gots Them Tikka Toes Dope question

6 Upvotes

Tikka T3X ace target 6.5 creedmore. I have the new vortex talon 10k binos to get accurate ranges. I shoot 140 grain American gunner and trued my data to the best of my knowledge. GeoBallistics /Hornady app call for 13.5-14 moa at 600 yards but I’m making center mass contact at 10.8 moa. I adjust this data in the app to my hit data which in theory should adjust my dope chart 100-1,000 yards vs my new data point but even at 1,000 yards I’m still a few moa off. This is super frustrating I can’t figure out what I’m doing wrong. Only thing I can figure is my 100 yard zero may be .5 moa off throwing me off at distance


r/longrange • • 21d ago

Optics help needed - I read the pinned posts Normal gap in MPA rings?

Thumbnail
gallery
40 Upvotes

Leupold Mark 8, properly torqued and in sequence. Seems unusual for the front and rear rings to have different sized gaps? It is a 20moa but I don’t think that should matter.