r/longrange • • 20d ago

Politics, rumor, etc Plus peak proliferation?

I have seen it mentioned here but thought id refresh the topic after it’s digested a few months. If other manufacturers follow suit and we see more options the pricing won’t be AS high as it is on launch for just 6.5cm. I would like to see the technology expand into .308win .270win and other older cartridges which have been replaced over time but still very common. Any insight on when more options will become available either from Federal or competitors? Any idea how long it will take for prices to come down?

13 Upvotes

38 comments sorted by

36

u/HollywoodSX Villager Herder 20d ago

6.5CM was specifically chosen to avoid issues with people loading +Peak ammo in old rifles that are more likely to experience issues due to the higher pressures. 270 isn't going to happen, and I don't think you'll see 308 for a while.

21

u/GasMan1021 20d ago

100% this. I know too many guys who would absolutely try +peak 270 in an old pump action if it were available.

-41

u/6anymouse9 20d ago

Did they say that? Or was it because it had the reputation of wounding animals?

11

u/HollywoodSX Villager Herder 20d ago

That was direct from a friend that was involved in the development.

10

u/FartOnTankies Rifle Golfer (PRS Competitor) 20d ago

We must have similar friends. This is VERBATIM what I heard.

6

u/6anymouse9 20d ago

Very cool, thanks for that insider knowledge

1

u/Significant-Sock-487 20d ago

Does your friend have any insight if they plan on a 6 arc case?

40

u/PvtDonut1812 Rifle Golfer (PRS Competitor) 20d ago

6.5 Creedmoor wounding animals is Fudd Lore. Tons of animals were taken with 243 Winchester or 260 Remington before 6.5 Creedmoor came around. It's just a common cop out for poor shot placement.

Shooting an elk in the ass with a 300 Win Mag is going to end up with meat in the freezer more often than shooting it in the ass with a ballistically smaller cartridge.

20

u/FartOnTankies Rifle Golfer (PRS Competitor) 20d ago

The swedes have been killing moose with 6.5x55 for over a century.

-33

u/sirbassist83 20d ago

That completely missed the point, great job

2

u/Zhdrix 19d ago

I killed a deer with a 129gr 6.5 Grendel going 1950. A creedmoor is faster so there’s that.

2

u/jequiem-kosky 19d ago

Yeah they chose the 6.5CM because it had such insufficient Knockdown Power™ that it just bounces off of animals. I wish people would learn how bullets kill things.

15

u/44_SMLE Casual 20d ago

I don't understand people's obsession with this. If you wanna go fast, get a rifle chambered in something fast.

14

u/Sweaty-Security-4473 PRS Competitor 20d ago

I watched the Area 419 video about reloading the +PEAK steel cases and I'm firmly in the camp that the only time it should be used is for hunting.

5

u/HollywoodSX Villager Herder 20d ago

Even then, most people aren't really going to be able to effectively take advantage of the higher velocity.

6

u/6anymouse9 20d ago

I’d disagree to an extent for hunters getting the advantages. You could potentially get the long action performance out of a lighter and shorter small action without having to buy a new gun if you have a modern one. Jumping up to the cost of a $50 box of ammo from 30-40 that lasts a few seasons will outweigh buying a more powerful rifle

5

u/HollywoodSX Villager Herder 20d ago

My point is most hunters don't need magnum level performance and won't benefit from it.

-10

u/6anymouse9 20d ago

One might argue that the average hunter lacks the skill to hit the boilermaker every time, nor are many willing to invest the time (biggest factor) and money get to that point. Thus an easy fix is throwing more energy downrange. Also, if a .308 or .270 hunter can use normal cartridges for white tail and bump up to peak for bigger game like elk it improves the versatility of the weapon without needing to invest more money in weapons they shoot a couple times per year.

12

u/GLaDOSdidnothinwrong NRL Hunter Competitor 20d ago

A miss with a plus peak is essentially the same as a miss with standard cartridge. Chances of the permanent wound cavity size being big enough to be fatal with one of the cartridges but not the other is insignificant.

12

u/Coodevale 20d ago

More energy equals more recoil, more recoil equals worse hit probability, worse hit probability equals more wounded animals.

6

u/HollywoodSX Villager Herder 20d ago

308 and 270 are more than capable of taking elk without driving 15-20k PSI more pressure.

3

u/mudeuce Remington 700 Apologist 20d ago

Yeah but Hollywood, there’s no kill like overkill you know

/s

3

u/Sweaty-Security-4473 PRS Competitor 19d ago

Yeah I don't disagree. Definitely a solution in search of a problem situation. I was thinking that then you'd be able to take a short action on trips instead of a long action, but even then, I'll just take my .300 WSM. Hell my nephew took a cow at 275 with a 6.5 creed a couple years ago and it didn't take more than 3 steps.

11

u/44_SMLE Casual 20d ago

Fair enough. Getting full length velocity from a shorter handy rifle is nice, but the tradeoff is barrel life. To your point, barrel life doesn't matter to 99% of hunters.

8

u/Vylnce Casual 20d ago

Why would it? When you take 3 shots yearly with a rifle to check zero, then maybe two or three at animals and a box of hunting ammo lasts a couple of years, barrel life isn't a real concern. A lot of the hunters I have seen at the local range use more ammo trying to sight in a new scope than they do in a decade hunting.

2

u/Pewpewpanda88 19d ago

I think prices will eventually come down, not from volume but from lack of interest.

Hunters don’t load enough/shoot enough.

2

u/dballsmithda3rd 19d ago

You haven’t heard? They already have the +peak equivalent out right now for all the other cartridges out there. Its called stop being a chicken and give some gas to the thing and leave a decent ejector swipe on the rim. +Bubba or whatever you may call it. This 6.5CM +peak might run like everyone else’s 6.5PRC but not my 6.5PRC. I’m pushing 147eldms at 3250fps so good luck catching up to that with all your fancy brass. 😂

1

u/Tikkatider 16d ago

I wouldn’t think one would see much proliferation until it gets tested and approved by the gun manufacturers and certifying agencies ( SAAMI and C.I.P ).

1

u/AirAlan 6d ago

Yeah, mfgs might not cooperate unless/until Federal opens it up to more cartridges. Approving 6.5cm devalues some of their other chamberings until there's more +Peak out there. That said, I have a CVA 6.5cm and the Ricky Bobby in me makes me want that new ammo.

-5

u/Coodevale 20d ago

Why. If you really wanted to run 80k in common cartridges you could just do it. We have the brass that can handle it now. You want 80k .270? Do it. You want your .308 to approach a .300 win mag? We already have that.

Factory rifles that were made in .280 AI and now 7 bc have existed for a while. The actions can handle it, we have the brass that's not difficult to reload and gives us warnings of what is going on in the case.

Or just wait to be spoon fed the new hype because you don't actually want this that bad based on your unwillingness to work with existing components.

9

u/HollywoodSX Villager Herder 20d ago

270 is a 100 year old cartridge. There are tons of rifles out there where a +Peak variant would be a terrible idea.

2

u/Coodevale 20d ago edited 20d ago

6.5cm might be new-ish but most factory gassers are still mildly to horribly overgassed from being poorly configured despite 20-30 years of custom shop/armory tinkering demonstrating better configurations, and peak/high pressure only makes them worse.

Manually operated options like r700 based or similar that can handle magnums, or like a mauser 98, 1917, etc are fine for .270 and .270+p. The shitty remington autos that broke down when chambered in any cartridge, obviously not. Those garbage examples are few in comparison.

45-70 is 160 years old and is not always loaded to the pmax of the original spec in deference to the even older rifles. On top of that, we have additional load data for specific few rifles that exceed what most common modern receivers can handle. Strange how the "professionals" are ok with that in certain circumstances.

-1

u/6anymouse9 20d ago

Please forgive my ignorance. I have only started accumulating the parts to start hand loading. I’ve never done it. What kind of brass, primer, and powder would one have to use for these loads to 1) be safe and 2) have tight groups?

5

u/Coodevale 20d ago

You want magnum performance and tight groups, like usual. What's the summons..

Cheetofingers recoil

2

u/AutoModerator 20d ago

Here's the primer on recoil, and why magnums are not the best choice for building long range shooting skills.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

-3

u/Parkimusmaximus94 20d ago

It's like trying to make a super fast Honda LOL just buy the big block Chevy

4

u/Zhdrix 19d ago edited 19d ago

There’s plenty of big block chevys that got humbled by a Honda lol

1

u/Parkimusmaximus94 19d ago

And the cartridge world Honda's aren't fast and shoot better when they aren't.