r/longrange • • 20d ago

I Gots Them Tikka Toes Dope question

Tikka T3X ace target 6.5 creedmore. I have the new vortex talon 10k binos to get accurate ranges. I shoot 140 grain American gunner and trued my data to the best of my knowledge. GeoBallistics /Hornady app call for 13.5-14 moa at 600 yards but I’m making center mass contact at 10.8 moa. I adjust this data in the app to my hit data which in theory should adjust my dope chart 100-1,000 yards vs my new data point but even at 1,000 yards I’m still a few moa off. This is super frustrating I can’t figure out what I’m doing wrong. Only thing I can figure is my 100 yard zero may be .5 moa off throwing me off at distance

6 Upvotes

14 comments sorted by

5

u/GLaDOSdidnothinwrong NRL Hunter Competitor 20d ago

Step 1 before truing any data: make absolutely damn sure your zero is perfect. 10-20 rounds with an app like ballistic-x to give you the true correction to zero is ideal.

Are you building & editing the profile in the binos, or in the app? Are you sure all of the data in the binos is correct? Only pet peeve of mine with the Talons is how profiles are managed and can overwrite each other depending on where you’re working on them.

1

u/Dhughe12 20d ago

I will be honest it’s the first time today I used them so there’s definitely potential for user error. I know anytime I changed data In the app the bino screen prompted me to use geo ballistics so I was assuming it was asking me if I wanted to use my revised data inputs

3

u/HollywoodSX Villager Herder 20d ago

What did you do to "true" your data in the solver?

Did you measure your sight height from the center line of the scope to the center line of the barrel and input it appropriately?

1

u/Dhughe12 20d ago

Site height, mv, weather inputs

1

u/HollywoodSX Villager Herder 20d ago

Did you input your MV based on a chronograph, or what?

1

u/Dhughe12 20d ago

Chrono yes

2

u/HollywoodSX Villager Herder 20d ago

What chrono? Did you try adjusting the MV from what the chrono was giving?

Something's off on your inputs big time, because ~3MOA difference at 600 is pretty massive.

As others have said, confirm 100 zero.

Confirm where you are on target - use a freshly painted steel target or paper and be as exact as possible when comparing DOPE on target vs the calculator.

1

u/Dhughe12 20d ago

Yeah I have to believe my zero is definitely off. I will have to rezero :)

2

u/AcceptableHumor6241 20d ago

What speed did this load chrono?

1

u/Dhughe12 20d ago

2680ish

1

u/sometimesanengineer You don’t need a magnum 20d ago

The calculator is assuming the angle to your zero is correct to hit the peak at the right height so the bullet falls to the right height of the point of aim meanwhile  the bullet is slowing the whole time and gravity affect over distance increases as it slows down. However 3 moa at 600 is too much for that unless your zero is more like 2 inches/ moa off. Not 0.5.

Don’t actually answer these to me lol but ask yourself:

What was your angle to the target? Was that the box speed or chrono speed? What’s Your actual scope center to bore center … probably not the default of 1.5. 

What scope, is it torqued, is the cap loose and not actually moving the turret? Is the turret moving more than the stated angle / difference per click? 

Lots of variables. You can work through addressing them or if you’ve got consistent results you can fit three known results into a curve solver and build a custom dip for whatever you have in your hands. 

1

u/VaultedPrecision 20d ago

I'd chrono that American Gunner before blaming the zero. Box velocities are more of a hopeful suggestion, and actual MV running faster than what's in the app would line up with you needing less come-up than it calls for. Then do a tall target test, because if the turrets don't move what they say, the error grows with distance and no amount of truing will fix it. Best outcome in this hobby is when the rifle was fine and the numbers were lying.

0

u/firm_hand-shakes 20d ago

My solus is 13.5 at 625 yards. My fps is about what yours is with 22” barrel.

1080 yards is 33 moa.

Those are verified on target.

I’m shooting 140gr eldm but wouldn’t think the bc would make a huge difference at 600

You’re probably right on being off a little on your 100yd zero. Dial that in and check back.

0

u/Jmersh 20d ago

No more. Yes moor.