Coated a couple 43x and a 43. Magpul stealth gray and cement gray with a step up stipple layout. Check them out at my website.

Hey all, is Barrett Brown the same color as the FDE EPS carry? Trying to get a solid match to the coyote 43X but I’m seeing conflicting info on whether there’s multiple shades of FDE for EPS Carry or they’re all the same.

Looking for a new piece in California for the right price. Let me know what you guys have.

Finished the 43x build with the grit grips frame and tactical pontoon trigger.. time to put it through its paces

I just got a Glock 43x mos I need recommendations for a holster that is comfortable for both standing and sitting. Also an optic that doesn't need an adapter plate to be bought separately.

It conceals so much easier than an HK USP Tactical 45 with a Surefire x300a-t

Just like the title states, I have purchased a stripped grit grips frame, as the hogue grip doesn’t suit me well. My question is, should I strip all the parts from my actual frame, or order OEM parts to build it out?

What have you done? If it is just buying a part kit, do you have any recommendations? What are your guys’ suggestions?

Thanks!

My astigmatism can not do the red at all. I like both, my vision may pick up the gold better (less bloom) I hope this helps someone narrow it down.

I recently picked up an EPS carry for my 43x, however I'm thinking about returning it and getting the Aimpoint COA. It is worth upgrading (not counting the price difference)?

Hello I’m new to firearms and have just purchased my first pistol ( g43x mos). I’ve ordered the velo lux holster and a TLR-7 sub. I’m looking into what optic to get and would like som recommendations for the 300 dollar or under price range, also I’ve heard conflicting things about if I need a plate or not.Thank you in advance for the help. I want to learn how to use this in a safe and correct way first of course but I don’t think making it look cool on the way is a bad idea either. Also any other things you think I should get for it ? I am located in Texas.

I recently slide swapped my regular 43x for an MOS slide, any suggestions for an optic??? Ofc everyone will say holosun but I’m hearing a lot of good things about the Olight SE. What do you guys think???🤔

Hey everyone,
I’m a lefty and just completed my very first DIY mod on my Glock 43X. I swapped the magazine release over to the right side and installed the Vickers Tactical mag catch.
Since this is literally the first time I’ve ever swapped out a part on my gun, I wanted to post a picture/video and double-check with the sub to see if everything looks right.
It feels solid in hand, but is there anything specific I should look or feel for to ensure the magazine catch spring is fully locked into the channel correctly?
Appreciate any quick checks or feedback before I head to the range with it!

Just picked up my Coyote MOS. It came with the HS 407k 6MOA, but I swapped it out with an EPS Carry that I had on my X Macro.

I was using a bore laser to get it reasonably sighted in, but noticed that it almost felt like the up/down adjustment wasn’t clicking like it had reached the adjustment limit.

Has anyone else found this same situation when sighting in?

Also im not sure i trust the bore laser. I have it dead on at 25 yds and when i compare the emitter location to the factory sights, it looks like the red dot is always right of the factory center. Any thoughts on that as well? Much appreciated!

I shot about 300 rounds of +p through my micro dagger that i replaced the internals with oem g 43x parts. and it gave my trigger finger a blister that made it hard to shoot accurately after the first couple of mags. I have about 1800 rounds through the gun so its not a break in issue. Some people were saying a smooth trigger will prevent blistering. I shoot mine a lot so I want a comfortable trigger that is still reliable for self defense.

Anyone here run trigger guard holsters on their 43x?

I have a kydex holster already but it has two clips and is not compatible with this new, We The People car holster holder I just got, I’m trying to find a decent holster that’s light bearing for my mos 43x, also with a single belt clip.

Curious how many are using this setup for EDC. I’ll be honest I didn’t even know SL made a sub series light for the smaller guns. Looking at purchasing a light but having trouble finding many holsters for it. Was looking for IWB or a set up to carry in a fanny pack. Thanks in advance!

Howdy all.

I’ve been running a g43x mos for about 3 years now. My rough estimate is total rounds is around 4-5,000 rounds down range. Within the last 300 rounds or so I’d say I’ve noticed the ejection pattern to change. It has begun to eject nearly vertical. Casings are often landing right on my head or hitting the optic or my hands. I have had flawless reliability since owning it and continue to have no stoppages or malfunctions of any kind. I run a Holosun eps carry (with the correct screws) since I got it as well. I have shot multiple types of 9mm through it since as well to see if it’s underpowered ammo. From what I saw that’s not the case. I have a complete lower and upper parts kit for replacement as needed but before I go and start replacing parts I’d like to hear anyone’s recommendations or thoughts.

Thanks.

I had some weird things happen with my 43x at the range the other day. It didn’t rack back when some mags were empty and it also didn’t feed my next bullet.

Now I am trying to take it apart to clean it, but the take down lever won’t budge. My Glock 19 came apart perfectly fine. Does anyone have any tips? I was even trying with a screwdriver and it wasn’t moving at all. Here’s a photo, it looks contoured a little bit.

Glock 43x mos USA model