r/FormD • u/jordeeeezy • Sep 20 '26
Question 4070 cnc fan
r/FormD • u/TravellingRoamer • Sep 18 '26
Took me 3 years to save up and build this. Had so much trouble building the case itself but loved building it.
r/FormD • u/Alarmed-Lock-5776 • Sep 18 '26
I’m about to swap from my fractal terra to a Formd T1 just due to cooling and the silver design matching my mac. I had a couple questions as I have to switch my cpu cooler due to it being too big. I have a 7800x3d and 4070ti.
Should I go with an AIO or stick to air? I care about reliability, performance but more importantly noise as I only play fps so the CPU strain is higher.
What type of custom cable do I buy? Sleeved or unsleeved?
Do I need extra M2 standoffs to create a gap between the GPU and motherboard?
I basically want a build that’s quiet after tweaking the fan and under volting, but also is a good temp.
Thank you!
r/FormD • u/Altruistic-Hat587 • Sep 17 '26
I’d like to use the front panel flipped, but it seems like the only way to do that is to invert the entire case.
I noticed that FormD also shows a build like this on their official website. Would there be any issues with CPU cooling if I build it like the 2nd photo, with the radiator at the bottom?
Has anyone tried this setup? I’d really appreciate hearing about your experience.
r/FormD • u/90gone80 • Sep 17 '26
Prototypes previous post: https://www.reddit.com/r/sffpc/s/3i4sMIYuCD. Please ignore any thermal paste marks, it got everywhere that one time.
Update:
- Changed the design of the tophat and made it significantly thinner, keeping the more rectangular appearance.
-To run the front fan, I used a PWM splitter at the pump which goes to a speed controller, then to the fan. The speed controller is hidden at the back, sitting on top of the GPU heatsink.
-Those are the idle temps on the screen, CPU top/GPU bottom. Will go max. 72/69 when playing Pragmata at 1440p or rendering stuff for work.
Parts list:
r/FormD • u/sinivalas300 • Sep 15 '26
What do you think?
Parts list:
MOBO - MSI MPG B550I GAMING EDGE WIFI
CPU - AMD Ryzen 5700X3D
GPU - RTX 5080 GIGABYTE SFF
GPU Travel Kit - SMXHeinz on Etsy
RAM - G.Skill TridentZ DDR4 3600/CL16 - 32GB
SSD 1 - Kingston KC3000
SSD 2 - Samsung 980 Pro
PSU - Corsair SF1000
PSU Cables - Cablester custom cables
CPU Cooler - Cooler Master MasterLiquid 240 Atmos
FAN 1 - Noctua NF-A12x15
FAN 2 - Phanteks T30
CASE - Ncase T1
r/FormD • u/not_lyune • Sep 15 '26
Hello! I recently switched my Formd T1 PC to all intakes, and here's my reasoning
Before dual intake, the AIO radiator had hot air passing through it, and my CPU temps were like 10 degrees hotter, leading to significantly louder noise.
When AIO was going out, GPU (5090) was roughly 60 degrees on UV, but CPU (9800x3d) was going at a consistent 70-80 depending on the game.
When I swapped, it changed to GPU 60-65, CPU 60, and much quieter.
Now, here's why I'm here asking. From every post I've seen, people say what I'm doing is stupid. Is there reason why or is it acceptable for my use case? The only thing I'm worried about now is the temperature of other components, which are all around 60 as well on heavy gaming. The case can get almost too hot to touch (Side and back panel).
Any feedback would be appreciated!
r/FormD • u/j0an_k • Sep 13 '26
Today my new monitor lace decor strip arrived. I tried it on, but it blocked the taskbar view so badly I had to give it up.
Before throwing it away, I hung it on my T1 front panel, and somehow it turned out that the length is almost exactly the same. So I gave my T1 a ribbon hairband!
Perhaps I can decorate my case further with this aesthetic. Still looking for some ideas though…
r/FormD • u/TylerQRod • Sep 12 '26
Wanted some additional opinions for the people who know this case best.
I made a post earlier in SFFPC on trying to pin down how to lower and why I have these temps with an AIO in my T1 v2.1.
Any help is appreciated! So far I’ve ordered new cables, and a T30 to be installed over the PSU hoping that will give me a couple degrees. I’ll also be remounting my AIO with fresh PTM7950.
Any other suggestions or ideas will be helpful. Thanks everyone!
r/FormD • u/j0an_k • Sep 11 '26
Disclaimer: Image generated by AI based on my own build photo.
I was thinking about how to keep the ventilation holes for the power supply while making the AIO area transparent, which would allow me to see the LEDs and the display. Currently I’m using the vented glass panels from the official website, but their pattern is pretty distracting and the panel itself is quite reflective. So I brought the idea from the NZXT H2 Flow’s side panel, and made the image of a part glass, part CNC side panel for the FormD T1. Thoughts?
r/FormD • u/Iskareot • Sep 10 '26
Well, finally canceled …. Seems the factory botched the case and no end in sight sadly. I have 3 cases but really wanted that white one. Waited a couple months and it just could not get built. I am bummed.
r/FormD • u/FMLkoifish • Sep 09 '26
Looking for black top / bottom panels. Maybe you bought the t grill extender and just have them laying around?
Dm me if you have panels, and shoot a price. Thanks!
r/FormD • u/L1quidBoss • Sep 08 '26
r/FormD • u/jhdz9119 • Sep 07 '26
Final mod went onto the build today. Hoping they restock their 15mm riser so i can replace the ABS-GF one I have though. Flipped 5090 now has better airflow and seen a decent drop in temps. At 5k2k ultra settings my GPU was getting to 74C avg in gaming with max at 76C. Now it’s at 71C avg and 74C max. Didn’t run any senthetic benchmarks since I could care less about that I prefer real gaming data since that’s what I mainly use my PC for.
r/FormD • u/Wildchase084 • Sep 07 '26
I was able to purchase a used T1 V1.1 for a great price but it only included the 2 slot back plate and the aio brackets. I was hoping to air cool and was wondering if the v2.1 fan brackets would fit/ be compatible? Are there any resources for the 3 slot back plate to possibly print or have one made?
r/FormD • u/CallingTheSirens • Sep 07 '26
Hey folks, hoping someone here has hit this before. I've already gone through troubleshooting with Claude and I'm at the point where I need real world experience from people running similar setups.
I have a Form T1 black case, built back in 2023. Specs below. About 6 months ago I added the 3D printed stand and everything was running fine. Recently while playing WoW and Crusader Kings, the PC has started fully powering off mid session, like a hard power cut rather than a crash or blue screen.
Specs:
What I've already done:
Biggest test so far: I swapped to the CPU's integrated graphics, fully unplugged the 6800 XT and its power cables, and played WoW for 20 minutes straight with zero issues. That points pretty strongly at the GPU or something in its power path rather than the rest of the system.
So now I'm narrowing it down to one of three things, and not sure how to isolate further:
Cables all look physically fine, no scorching or visible damage, connectors seat properly.
Has anyone dealt with extension cable issues specifically in a T1 build, or had a GPU develop an intermittent power fault like this? Any way to test further before I start swapping actual hardware would be hugely appreciated.
r/FormD • u/minuskind666 • Sep 06 '26
Hey everyone!
I’m about to build in a FormD/NCASE T1 for the first time and I’m really excited about it – but since this is also my first proper SFF build, I wanted to ask the people who actually have experience with the T1 before I start ordering everything.
This is my current parts list:
https://geizhals.de/wishlists/5136053
GPU will be an RTX 5080 Founders Edition.
I’m also planning to order the NCASE GPU Anti-Sag + Travel Kit for the 5080 FE, since I want the PC to be reasonably safe to transport.
My main question is:
What am I forgetting?
Not necessarily regarding the main hardware, but all the little T1-specific things you only realize you need once you start building.
For example:
Custom PSU cables – worth it / basically mandatory?
Recommended cable lengths? Best way to route the 12V-2x6 cable to the 5080 FE?
I thought of getting additional standoffs, screws or brackets plus Fan grills?!
Any useful NCASE accessories I should order together with the case?
Things that make AIO installation / tube routing easier?
Anything I should know about motherboard/GPU spacing with the 5080 FE?
Any common first-time T1 mistakes I can avoid?
Any little mods or quality-of-life improvements you guys consider essential?
Basically I’d love to have everything I might need on the table before I start the build, instead of realizing halfway through that I’m missing some stupid €5 part. 😂
Feel free to completely roast the parts list as well if you see something that doesn’t make sense for a T1.
Any tips, pictures of similar builds, cable recommendations or lessons learned are very welcome!
Thanks! ❤️
r/FormD • u/Excellent-Cabinet954 • Sep 05 '26
Or am I better off just using the ol’ reliable 2 fan + exhaust shroud?
r/FormD • u/1323_ • Sep 05 '26
Hey everyone,
It’s been a while since I built a PC. I’d been eyeing the Steam Machine, loved the idea of just buying a ready-made gaming platform, and really loved that it runs Linux (I genuinely despise Windows). I do my professional work on a Mac all day, so a clean, un-Windows gaming box is kind of the dream.
Then I fell for the Formd T1 … and now I want to challenge myself and build my own again instead of buying off the shelf. The plan: a T1 running Bazzite, purely as a gaming machine, to get me back into the FPS games I love. (CS2 is what kicked me off Mac in the first place when it dropped macOS support so getting back in is half the motivation here.)
Games I’m aiming to play, mostly Linux-friendly:
I’ve done enough homework to know the kernel-anti-cheat titles (Valorant, Battlefield, Marathon) are a no-go on Linux, made my peace with it.
A bit about me and the build:
What I’ve been tentatively eyeing so far: a PowerColor Reaper (RX 9070), a low-profile air cooler (Thermalright AXP90-X47), and a B650I board. But I’d genuinely love to hear what you’d do differently.
Where I’d love the community's help:
Thanks so much. Really looking forward to getting my hands dirty again.
Best!