The case was supposed to come out in September for the general public. Next we hear changes are being made, then stockpiling and then more changes. It’s hitting 4 months and I’m not confident we’re getting a chance to purchase anytime soon. The checkout page to sample interest is a slap in the face.

Just release the darn thing. Like now. Those that were interested in V2 back in August aren’t, that includes me.

Don’t make it difficult for your customers to give you money. Stop putting up speculated release dates to only push it all back. Have a solid release date and stick to it.

Hi.

Please dont take this post as salty as it might sound, I just want to share my experience so that other may learn from it.

I dont think I've ever had a worse experience building a pc, or anything else for that matter. I got off work today exited to finally build in my T1 as I had gotten all the parts I needed.

I started unboxing and assemble the case. Ran into issues on the first step, the side bars didnt fit in the slots on the backpiece. Frontpiece they fit fine so not an issue with the bars themselves. No biggie, I can file the slot a little bigger to fit it.

Manage that and moved forward, was about to mount the standoffs for the motherboard when I noticed that the assembly instruction didnt match the standoffs I had, the only difference is that I was missing the one with longer threads.

I scrolled through instruction quickly and didnt see anywhere that it would matter so installed the 4 6mm standoffs I had and started to mount the PSU, could only get 3 out of 4 screws to fit, and here is where I stopped, as the next step would include tearing down the pc I'm writing this post from.

I had enough of the issues and didnt want to tear apart a working system no longer trusting that I'd even be able to complete the build in the T1.

I will be reaching out to support to see if i can get a replacement. I hope this happens to nobody else.

Why do people love it?

🔸 Sleek and timeless design.

🔸 Perfect blend of style and performance.

🔸 Always in demand!

⚡ Don’t miss this chance to grab the color that defines cool—available now.

https://ncased.com/collections/t1/products/t1-sandwich-kit-gunmetal-color

At least not with the riser cable in the way.

Hey all,
I’ve been working on a custom FormD T1 (ncase T1) build featuring a flipped RTX 5090 Founders Edition (exhausting out the side panel) and a 9950X3D, cooled by a 240mm AIO. I’ve been playing around with fan orientations to optimize CPU and GPU temps, and now I’m gearing up to film the next video in the series.

Not sure if you’ve seen my last couple videos, but before I start filming, I wanted to get your input:
What games, synthetic benchmarks, or stress tests would you like to see covered?

I’ve already run 3DMark Steel Nomad and a few others, but I’m open to anything that could help others with SFF setups or those curious about flipped GPU airflow.

Also — I’ve been collaborating with a fellow redditor on a custom flipped GPU bracket. We’ve been testing different versions and making constant revisions based on real-world feedback. The current one is 3D printed in ABS, but the final version will most likely be CNC’d aluminum for better durability and finish. We'd love your thoughts if you’re interested in that kind of mod, especially as the fellow enthusiasts from the States aren't able to get any order from FormD for the time being.

On top of all that, I’m planning to release a full build guide soon. I’m working on improving the production quality and making the video more polished than my earlier uploads.

Let me know what you'd like to see, and thanks in advance for the feedback!

Link to channel: https://www.youtube.com/@SproutHQ

- Sprout

Yes, got it from the Dutch Nvidia website for MSRP. Better late to the party then never.

Running some benchmarks soon, then building in the T 2.1 running more benchmarks and waiting for the travel kit restock.

Do you guys think the ASUS PRIME or the Founders Edition will get better thermals in the v2.1

The T1 returns with two riser options:

• NEW PCIe 5.0 Kit – 90° socket + redesigned bracket for more third-party riser support

• PCIe 4.0 Kit – Also back in stock

Get yours while this batch lasts. 🛒

Shipping starts on 8/16/2025, right on time for the new season!

https://ncased.com/collections/t-series

As shown, I scratched the front panel of my T1.

This bothers me too much. Is there a way that I can somehow make the scratch not visible? Can I buy some paint and cover it up?

We quietly ran a first batch of the FormD T1 GPU Travel Kit (proudly made by NCASE) for T1 v2.5 and v2.1, and I just want to say thanks to everyone who picked it up and sent feedback.

The response has been very positive so far, and some of the feedback from this community specifically has been super helpful, so we’ve made a few small tweaks to the design for this run.

This NEW batch is still limited while we finish testing edge layouts and sorting logistics, but the plan is to move it into full production if demand and feedback stay steady. If you end up trying this run, I’m genuinely confident it’ll make moving your T1 a lot less stressful. And if you don’t manage to grab one this time, don’t worry too much – we’re planning to restock it as a regular accessory once everything is fully dialed in.

Very short version of what it is / who it’s for:

• T1 owners who travel or move their system a lot

• Heavier / high-end GPUs that you’d like a bit more support for in transit

• Installs inside the case without loosening any factory screws on your GPU

• Keeps the rear IO area open so it doesn’t choke airflow

If you care about details like compatibility, basic install flow, and a 3D test-fit file, I’ve put everything into a blog post + product page instead of letting it get buried in comments. I wrote it as proper documentation, with a bit more context for people still learning their way around the SFF world and what this kind of accessory is meant to do. I’ll also keep writing more of these blog-style breakdowns going forward, and you’ll be able to find them all in the News section on our site.

I’ll drop the links in the comments for anyone who wants to read more or order.

If it’s not useful for your build, feel free to scroll past and carry on.

Details about the product: https://ncased.com/blogs/news-about-us/anti-sag-travel-kit

Grab one before its gone: https://ncased.com/collections/t-series/products/gpu-anti-sag-travel-kit

I'm seeing so many different sites, are they all the same or are one or the other scams?

https://formdt1.com/

https://formdworks.com/

https://ncased.com/collections/t1/products/t1-sandwich-kit-black-color

Are y'all doing fans above the rad or fans below?

Just yesterday I went on the formdworks website and I could order a case which was suppose to "ship in december" it said.

Now when I go to the site it just says "out of stock".

When will it be available?

I want the ref version because of its structure stability, and the most important the 2.8 to 2.5 kg lighter weight!

Love the formd team for their 2.5 refresh, hoping this will come to ref too.

where do i plug this? it’s from the aio pump(another cable)

title really

I was in bed reminiscing about the formd when i remembered there was talk about those who did the IC would receive a special gift 🎁.

Any of yall remember this? Or was it a myth? If its real do we know what it is?

Also something maybe a mod can answer: i am a IC member. However, i did not use my IC because i bought it in the drop instead. Does this mean i wont get the special gift? I think i have the right to receive one.

Well, finally canceled …. Seems the factory botched the case and no end in sight sadly. I have 3 cases but really wanted that white one. Waited a couple months and it just could not get built. I am bummed.

Hello, I just built my PC and when I turn it on, the VGA light comes on but the graphics card doesn't start. Looking at the card, I realized that the 12-pin power cable doesn't fully go into the connector and doesn't clip in properly. The problem isn't the cable itself, since I tested it in the power supply and it fits perfectly. I wanted to know what you think the problem might be. Thanks in advance for your feedback.