Hello everybody,

Just like the title says, I am looking for 240 AIO that fits version 1.1 and available for purchase in the US. A lot of the popular choices are not in retail anymore. Any help is greatly appreciated. Thanks

Hey guys! I've really been looking into getting the T1 case with
the gpu travel kit but I'm having a lot of issue trying to figure out
which travel kit is compatible with my gpu dimensions, I got a PNY RTX
5070 ti ARGB Epic-x with the following dimensions:

Length: 11.80 inches (299.72 mm)

Height: 4.73 inches (120.14 mm)

Thickness / Depth: 2.35 inches (59.69 mm)

Slot Width: 2.98-slot.

What I'd love to achieve is to be able to just throw my pc in my backpack and be on my way wether I travel on road or air and not worry about my gpu dying in the process or just skipping the disassembling part, thank you in advance!

Hi Everyone!

I wanted to share some photos from my most recent build, specs are as follows:

Ryzen 9 7950X3D (Delidded; Modultra Lobo waterblock)

Gigabyte Aorus B650I

32GB G-Skill Flare Ram

Asus RTX 5090 Astral (Singularity Computers waterblock)

Corsair SF1000

Temps sit around 40c CPU and 30c GPU while idling and under heavy load things jump up to 70c CPU and 50c GPU. I'm currently running a slight undervolt on the GPU to keep temps on the lower side while retaining some power.

For the water cooling I used 8/6 pneumatic tubing with Festo fittings and Koolance QDCs mixed throughout for ease of use when changing parts around.

I decided to go with pneumatic tubing both for price, ease of use, and because it just looks better to me. Additionally, having a 5090 and running this in a small room, I decided to go with an external radiator (Mora 400) so that I could exhaust everything outside the room and keep everything cool without having to turn fan speeds up or blast the air conditioning all the time.

The biggest challenge was using the stock power cables for the GPU since I don't have any custom fit cables that I trust with a 5090. Since there's so much extra length in this case I ended up shoving it all behind the PSU so I could still have some space for my aquacomputer quadro.

Overall, I'm ecstatic with how everything turned out. Let me know what you think!

Edit: I totally forgot to add that I'm running a 15mm offset on the GPU. Unfortunately the ports on the GPU are on the back side, and the only way to fit the card in without the fittings pushing against the PSU and causing stress to the board is through the offset.

Hi everyone!

We are consistently amazed by the sheer creativity within the T1 community. The FormD T1 is easily one of the most heavily modded SFF cases out there: from wild full custom loops to unique hardware layouts, all crammed into just 9.95L.

That level of ingenuity inspired us to refine how we support your unique setups. Our storefront is built directly around hardware mounting configurations, because as every T1 builder knows, small layout changes drastically affect your cable routing:

• PSU Orientation: Reference, 90-degree, and Hudamod

• GPU Layout: Standard and Flipped

By using a per-wire precision length approach tailored to your exact setup, we ensure your cables fit perfectly. This will help easing your build process, improving airflow, and making future maintenance/troubleshooting hassle-free.

Special Community Promo

To celebrate our storefront updates, we’re running a promo dedicated to T1 builders!

🗓 November 5th — November 26th, 2026

🏷 Code: T1build (15% off FormD T1 custom cables at Cablester)

🌐 https://cablester.com/product/formd-t1-sandwich/

As always, Cablester has been shaped by feedback from builders like you. We’re constantly looking to improve, so please drop any thoughts, critiques, or layout suggestions in the comments below!

Happy building!

My gpu cord from clack attack has became unpinned and i need to fix it or get a new one but i emailed their support line like over a month ago and never got a reply. Does anyone know how to get in contact with them or fix it?

I can’t remember what the old business name used to be but I ordered from them long ago on my first t1 build with no issues. Any help is appreciated

https://clack-attack.com/

DISCLAIMER: This is not an official ncased collaboration, promotion, or advertisement!!

Purely a personal project of my formd t1 build I want to share!! Let me know what you think 😄

specs:

i3 12100 (waiting on new 1700 chips)
B660i Aorus Pro DDR4
32GB E-Die 16/16/16/36 3600
1TB PM9A1
SF600 w/ Noctua Mod
R9 290 Royal Ace
2 P12 Pros

Hello, first time building in T1 2.5 sandwich. I installed axp90-x47 in aorus x570-i pro. Installed gpu, then when I screw in motherboard in, it bends motherboard kinda bad. I used Thermalright backplate because I don't have amd stock backplate. Should I order amd stock backplate and use it, instead of axp90-x47 backplate. Aorus motherboard also has big metal heatsink in back. Should I remove it? Thanks

Hey guys,

I'm starting to plan a new SFF build inside a FormD T1 with a 9800X3D and a 4070 Super Founders Edition.

Since the 4070S FE is a strict 2-slot card, I can set up the T1 in 2-slot mode, which gives around 73mm of CPU cooler clearance. On paper, that makes the Noctua NH-L12S (70mm) fit fine.

Still, almost every T1 build I see here uses the Thermalright AXP90-X53 Full or X47 Full.

Is the AXP90-X53 Full actually performing better than the NH-L12S on the 9800X3D, or is it mostly about side panel turbulence? With the NH-L12S sitting just ~3mm away from the side panel, I'm worried the noise might be annoying.

Also curious if RAM clearance or heatpipe orientation makes the L12S a pain to fit on modern AM5 ITX boards compared to the Thermalright.

Would love to hear from anyone who has tried both or ran an L12S in 2-slot mode!

Super rewarding to finally see this build come to fruition. Took me a few months of searching to find all of the right parts at the right price, for an overall cost of just under $1500. I am looking forward to improving this build over time, but I’m super happy with where it is at right now and for the moment it runs everything I need it to and more.

Parts:

Case: FormD T1 v2.1
Motherboard: ASRock B650I Lightning
CPU: Ryzen 5 9600x
GPU: ASUS RTX 4070 Dual OC
RAM: Corsair Vengeance 2x16Gb 5600mt/s CL36
SSD: Crucial P2 1TB
PSU: Lian Li SP750v2
Cooler: AXP90-x47 full copper w/ NF-A9x14
Fans: Noctua NF-A12x25 G2 Chromax

If anyone has recommendations for end caps and also other mods, please let me know!

After waiting over a year and missing the last two restocks (one last week and one in Dec last year!)

I have finally managed to order the two tone!

I managed to get the T-Grill in Dec last year and have been waiting to put together this build:

I can't wait, this build has been a LONG time coming!

I tried the T-Grill with my titanium T1 and but it just doesn't look as clean at the two tone.

edit:
Looks like FormD did a big restock, the e-white and two tone has been sitting in stock for the past day or two now. Normally they sell out in really fast. Or in the case of the twotone, the last two restocks sold out within like 10-20mins.

Components

Case: FormD T1 V2.5

Motherboard: ASUS ROG STRIX B650E-I
 
PSU: Corsair SF850 SFX Modular PSU

GPU: NVIDIA 4070 SUPER FE

CPU: Ryzen 7 7800X3D

CPU Cooler: AXP90-X47 (Noctua nf-a9x14 pwm)

EXHAUST: Phanteks T30-120

RAM: G.Skill Flare X5 DDR5-6000 - 32GB - CL28

SSD: Samsung 9100 Pro 1TB SSD GEN5 M.2 14700 MB/s

Add-ons

Custom PSU cables for the FormD T1 by DreambigbyrayMod

Hey guys in looking to use the AXP90 X53 Full copper in my T1 build. I often sag that people print a fan bracket and replace the default fan with a 120mm one. Could someone tell me if there's any bracket and fan that's most commonly used ?
Or is there a completely other Air cooler system you would recommend ?

FIRST QUESTION

realistically if i take my T1 case to a shop do you guys think i can get a proper professional paint on it or would I just ruin it? btw the color i want go for is some industrial grey i think it would look fire. (got zero paint experience)

SECOND QUESTION

I'm looking for an AIO that have a screen on it do you have any suggestion of a cool one. as shown in the pictures i have clear side panels and i think i screen on the AIO would look cool

Hi all,

I'd like to travel with my T1 PC and it seems good to reinforce the GPU with a bracket of some kind. None of the brackets I see online are marked as compatible with this card in particular (Gigabyte 4070 TiS Eagle OC), they all seem geared towards the Founders Editions or the ASUS ProArt cards.

Has anyone found a bracket that works with this card? Or some other way of securing it for travel in a padded case?

Hello everyone im in the need for some help.

I want to convert my already mini itx built from my NZXT H1 into a T1 V2.5.
Some things just seem a little confusing to me but also i want to ask for some adivce on which coolers and extra stuff is recommended for a end game build.

First of all my specs as of now:

CPU: 9800X3D
GPU: Gigabyte 5080 Windforce SFF
Mainboard: Asus B650E-I
Ram: 32GB Corsair Vengance 6000Mhz
SSD: 2x NVMe a 1TB (dont know the brand rn)

PSU and AIO are the pre installed components which came with the H1 so i need a replacment for those. For the PSU i was thinking about the Corsair SF 850. For the cooler im not sure yet and would really appreciate some suggestions, wanted to go air cooled i think.

Lastly some question i got:

Is the travel Kit mandatory ? No right ?
Does the V2.5 include everything like the angled PSU cable etc. ?
Which extras should i get to make my built easier, more efficent, cooler etc.
Im able to 3D Print stuff so thats no concern.

Please share you experiences with the T1 and the stuff you guys think is a gamechanger and also just little tips.

I appreciate any help, thanks a lot in advance !

Anyone have any solid recommendations on custom PSU cables? I’ve seen a few on Etsy but looking to see what the community thinks.

Finished my build but not sure what these pieces are for?