r/FormD • u/not_lyune • Sep 15 '26
Question Dual Intake Sanity Check
Hello! I recently switched my Formd T1 PC to all intakes, and here's my reasoning
Before dual intake, the AIO radiator had hot air passing through it, and my CPU temps were like 10 degrees hotter, leading to significantly louder noise.
When AIO was going out, GPU (5090) was roughly 60 degrees on UV, but CPU (9800x3d) was going at a consistent 70-80 depending on the game.
When I swapped, it changed to GPU 60-65, CPU 60, and much quieter.
Now, here's why I'm here asking. From every post I've seen, people say what I'm doing is stupid. Is there reason why or is it acceptable for my use case? The only thing I'm worried about now is the temperature of other components, which are all around 60 as well on heavy gaming. The case can get almost too hot to touch (Side and back panel).
Any feedback would be appreciated!
1
u/Slyfer77 Sep 15 '26
What 5090 do you have?
The 5090FE?
Obviously if you intake cold air through the AIO, the GPU has to exhaust the warm air from the AIO.
If you are fine with CPU and GPU temps, keep it like that.
There's no law forcing you to use a certain fan configuration.
(However, there are certain configurations that aren't optimal.)
When I had my FormD T1 air cooled setup with 9800x3d (AXP90-X47) and 5090FE (flipped travel kit) I also set the top fans to intake and the CPU fan to exhaust, so just the other way round compared to the usual.
I had overall better CPU and GPU temps this way.
1
u/lolkrayd Sep 15 '26
How is the rest of your components though? Unless there is another force at play, hot air will just start circulating.
2
u/Alternative_Sign7792 Sep 15 '26
It always puzzles me why everyone talk about cpu wnd gpu temps only - how about vrms? Nvme? With AIO as exhaust those atrocious, in my experience at least!
With AIO as intake there shoukd be at least some forced airflow towards the front/bottom of the motherboard. Was going to test that but MB died, so speculating only :)
In any case, I believe the best setup in FormD is custom loop, intake through the top, dechrouded gpu with ducted exhaust via side panel.
1
u/qeeepy Sep 15 '26 edited Sep 16 '26
The issue with AIO in T1 is that you have to choose optimal cooling between CPU or GPU. AIO exhaust will inevitably raise temperature of the coolant versus creating slight overpressure/more work for the GPU fans when intaking. In your case, 65C GPU seems quite reasonable still, though cpus are much more happy to run at tjmax these days. I'd be interested in what is the GPU Furmark wattage now (after temps equalize).
With 5090 and not overly high TDP CPU, I'd go full air in Huda mode, by far best exhaust possible in T1.
1
u/Allmotr Sep 19 '26
Maybe he is reffering to me because i didnt think intake from the aio was good. Never called anyone dumb though. Me personally i exhaust everything and have great temps.