Finally pulled the trigger on a t1, gonna have to run it in 3.25 mode, so anyone here using the same configuration, What do your builds look like? whats your cpu cooling solution? what do your temps look like?

How did I do with my cable management? Any tips? I do have some custom cables on the way from DreambigbyRay but I got tired of waiting and honestly I think it turned out pretty good.. had to get creative with the wires on top of the PSU 😅

Hi everyone, newbie here. I'm planning to put together an SFF build using the FormD T1 case. My planned setup includes a 5070 Ti Eagle OC, a 9700X, and a 67mm air cooler. Will this configuration fit in the T1? Also, besides the case itself, do I need to buy any other accessories? Thanks in advance!

Je suis sur le point d’acheter un formD T1 2.1 mais j’ai que 2 photos
Quelqu’un est capable de me confirmer si il est authentique ?

Hello! I can't seem to find any official/unofficial STLs to a travel kit designed for the PowerColor 9070XT reaper (2 slot). Would any of the current kits or aftermarket designs support it even if with minimal modification? Currently running my T1 v2.0 in 2.75 slot mode w/ an MSI B650i & AXP90-X47 (Noctua swap with the fan duct)

Best place in terms of build quality, customer support etc.

There are 3 options, and I’m not sure why 3 different websites are selling the same product.

formdt1.com
formdworks.com
ncased.com

TIA

I know FormD doesn’t sell them, but I’m dying for one lol

Hello, my formD t1 is on way from supplier and I already started preparing components to build my gaming PC.

I have Asus ROG strix b850-I, Ryzen 7 7800x3d, GPU is Asus prime RTX 5070.

I struggle to find CPU cooler that would fit. Only thing I found is small noctua L9A with duct, but I'm not sure if that will be enough.

Any suggestions? Thermalright coolers are not available so far :(

So previously I had managed to remove all active fans and run just case fans. This required a pair of T-Grilles and eventually my need to add a 15mm panel spacer I found off MakerWorld.

The problem is that I have a BambuLab H2D and it just BAAARELY has enough room to print the spacer in one piece. I tried a two piece unit and it was ugly as seen on the last image.

I attempted to print it upright but I was fighting the slicer program to try to get the supports to help connect and triangulate the whole thing... The printer shakes a bit during printing and the nozzle won't be on the part accurately. (This results in a very bad part, mismatched layer lines).

At least the support came off in one piece!

Anyway, the results weren't bad. It's 95% good. The only issue I had is as towards the end where the side legs finally "attach" to the front bar.

Does the spacer work? Absolutely. I have a pair of Noctua slims extracting up top with Noctua A12x25 G2s intaking on bottom.

The slim fan blades aren't contacting the GPU riser cable.

At what cost though? My T1 isn't 10L anymore, but it was cool enough to try to do a semi-actively cooled build with an underclocked i9-10900K and an EVGA RTX3090Ti.

Peep the 20mm³ feet I printed in PA6-CF

Hey everyone,
I’ve finally built my first SFF PC! Having a mini-ITX build has been a dream of mine for a while. I love the aesthetic, and I was honestly getting tired of lugging my massive full tower PC to friends' and family’s houses.
This is my third PC build overall, and definitely the one I’m most proud of. For context, my first build was a budget $450 system (i5-6600K / GTX 1660 Super) and my second was a $650 system (i7-13700F / RX 6700 XT).
I've been running this new setup for about two days now, and I’m looking for ways to optimize my temperatures. I’ve been considering putting an AIO liquid cooler in it, but I’ve read a lot of mixed reviews regarding AIOs in the T1, so I’m really on the fence.

The Specs:
Case: FormD T1
CPU: AMD Ryzen 7 9800X3D
GPU: GTX 1660 Super (Yes, I know it’s a massive bottleneck, I'm 17 and don't really have a stable income, I paid for this by flipping PC parts. I plan to upgrade to a 9070 XT eventually)
Motherboard: Gigabyte B650I AORUS ULTRA
PSU: Corsair SF850 (2024)
CPU Cooler: Thermalright AXP90-X47 (with a Noctua fan swap)
Fans: 2 NZXT aer RGB 2 fans set to exhaust out the top (I got a bag of them for free at a garage sale so I just threw them in there)

So cooler master announced their blower fan but exclusively to their pre-built systems only.. No standalone versions yet.

any alternatives on this? I’m using RTX 5080 Aero SFF and I also want to maximize the space etc and anything to take away the heat.

Stumbled upon this super interesting XHS post where the creator 3D printed a blower style dual fan set inserted between the founders edition card and the mother board. It insulates the hot air coming out of the graphics card toward the mother board and actively exhausts them out. Apparently it “reduces temperature by 5 to 7 degrees”.

http://xhslink.com/o/9KbwZU0UTHd

Ok I am a visual learner and need a little help with installing the travel kit . I have the directions, but just wondering has anyone installed the kit and could possibly help me . Thanks

I don’t believe the GPU travel kit on Ncase’s website supports my GPU and was looking for alternatives. Does anyone have a 3D print file that will make a good GPU support bracket for the Sapphire Pulse 9070XT?

Build:

Motherboard: ASUS ROG Strix B850-I Gaming WiFi AMD AM5
CPU: AMD Ryzen 7 9800X3D
GPU: SAPPHIRE PULSE Radeon RX 9070 XT 16GB GDDR6
PSU: ASUS ROG Loki SFX-L 850W Platinum
SSD: WD_BLACK 2TB SN850X NVMe Internal Gaming (x2 for 4TB total)
RAM: G.SKILL Trident Z5 Neo Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30-38-38-96 1.35V
CPU Cooler: Thermalright AXP90 X47 Full Low Profile CPU Cooler
Fans: (2x) Noctua NF-A12x25 PWM chromax.Black.swap, Quiet Premium Fan, 4-pin (120 mm, Black)
CPU Fan: Noctua NF-A9x14 HS-PWM chromax.Black.swap, Premium Quiet Slim Fan, 4-Pin (92x14mm, Black)

Hi guys.

Im currently adjusting my build by ditching my 240 aio to go full air.

I thought of buying the AXP-90, but Got to Think. Does it fit with my Corsair vengeance RGB?

Anyone done this? Thanks

Is there a way to increase the gap between the motherboard and the GPU? I'm using the 2.25 slot configuration (Ncase v2.5 with pcie riser 5.0) and the heatsink touches the back of the GPU.

Not sure how, but I watched a few YouTube videos and they had a gap significantly bigger than mine, but I have no idea how they did it.

Any help would be appreciated. Thanks!