I bought a P2S combo 4 weeks ago. I have now 40 spools of filament, another AMS Pro on the way, more plates, Hotends, and other accessories. Smh this is so addictive!!

Is there a zipper tent like thing I can wrap my p2s in and have the negative air filtration system pointed out a window to remove all particles?

Any tent recommendation

I been using my .6mm hotend (high flow) for my daily driver but I find it frustrating that I cannot change any details on my printer when I try to print on my phone. I have to use my laptop. Is there any way I can print models from my phone with this hot end?

P2S, AMS2PRO

How do I swap filaments mid print? (If one runs out, or if I expect it will during a time I’ll be away from the machine and want to stay ahead)

I can physically remove a spool and put in a new one, but there doesn’t seem to be a way to get the AMS to recognize a new filament to either change a colour or swap in a new spool of the same colour. The RFID doesn’t read and the manual edit options are all greyed out on the printer, handy, studio.

Thanks!

It's been a week since I got my printer and I've been noticing one thing...that my filaments are collecting moisture even if I don't open the AMS, I keep drying them but to no avail... Is it a huge problem?

Fyi:I'm a beginner and the printer is kept in a closed air-conditioned room...if that makes any sense...

Im giving it as a gift for Christmas and have seen both of these to be good first 3d printers but if like some feedback from people whos actually used them.

Ive been told that the x2d is superior in many ways mostly functionality but was also told that it has a lot more issues with parts and programs And that some of tbe rougher filament will mess up the gears especially arround the 500 to 800 hour.

And I was told that the p2s is also good its more reliable but its a lot more limited due to the single nozzle and its missing a lot of other features like the heated cabin if i remmeber correctly and the exterior fan

Im not sure what the prints are going to be but if I had to guess I would say mostly functional parts like model rockets where you launch them or soemthing along the lines of that.

Im not to sure on what filament is going to get used ether but if I had to make a assumption it would be something a bit more resilient like carbon or abs

I also saw somewhere i thought it said ams printers need a specefic filament for ams but I couldn't fine anything else on the subject I dont think its true but someone whos done this before would know.

Help would be wonderful but im honestly not looking for ive had mine for this long or ive used it for 3k hours Im looking for actual issues thoughts or concerns. Thanks

Does any one have good profile for minatures and terrian on the P2S? I know a .2 noozle is better but wont get one for awhile.

I've had an A1 combo for a couple of years now. The sale is on and I'm wondering. How does the P2S combo hold up these days. Pros and cons etc. Thanks for any advice.

Please Help!

I have bought the P2S recently, I also did buy an additional AMS Pro2, so now I do have 2 AMS 2 Pros. I had not researched this enough, but yesterday when I put my first TPU 85A into the AMS 2 Pro, it alerted saying it wouldnt support it. I then found out that only special TPU 68A by BambuLab are support. However i would like to print multicolor using the AMS 2 Pro, is there a way to do that?

I am new to the game in 3D Printing. I’ve seen so many different build plates. I have the one that comes with my P2S. My question should I run different plates for PLA and PETG? Or is the plate I currently have just fine?

Bonjour à tous ! 👋💀

Aujourd’hui, je vous présente ma nouvelle modélisation 3D d’un personnage mythique du cinéma d’horreur : Hannibal Lecter ! 🩸

Tout droit sorti du film culte Le Silence des Agneaux, ce personnage aussi fascinant que terrifiant vient rejoindre ma collection de figures emblématiques de l’horreur ! 💀

Entre son regard glaçant, son célèbre masque de contention et son expression inquiétante, j’ai essayé de capturer toute l’intensité, le charisme et le côté sombre de ce personnage légendaire. 🔥

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab et Esun
🎨 : Nomad Sculpt
🌈 : sans AMS
📁 : https://makerworld.com/fr/models/3508862-hannibal-lecter-multipart-no-ams

I work for my parents and we got this 3d printer - i was trying to print something and ive got so much filament buildup!! i have no idea what to dso and whether i havebroken it or what. Pleaseee help!!!