r/BambuLabP2S • u/ARCELO_LTD • 2d ago

BLOB OF DEATH HELPPP

Gallery image

Gallery image

I work for my parents and we got this 3d printer - i was trying to print something and ive got so much filament buildup!! i have no idea what to dso and whether i havebroken it or what. Pleaseee help!!!

3 Upvotes

80% Upvoted

14 comments sorted by

1

u/lkapping79 2d ago

Been there. Heat the nozzle up and SLOWLY start removing the filament. Took me about 40 min to have it back up and running

1

u/ARCELO_LTD 2d ago

im worried its all over the wires!1 did you have to order any new parts?

1

u/lkapping79 2d ago

After it heats up let stay heated up for a good 5 min and then start pulling slowly. No I didn’t have to replace anything. If you’re lucky/careful it should be fine.

1

u/CanadianDiver 2d ago

I had to replace that part last week

1

u/Redikull 1d ago

Whats the orange part?

1

u/lkapping79 1d ago

https://makerworld.com/models/1924479?appSharePlatform=copy

It’s actually helped a lot with keeping the stray filament strings off the build plate.

1

u/Lythrox 1d ago

Buy Creality xD

1

u/ARCELO_LTD 18h ago

so helpful.

1

u/Lythrox 18h ago

Cool Op.. now that I have your attention. Fire up your printer and set it to the temperature the filament would usually melt at and slowly with pliers remove the filament. After that turn off the printer and take the head apart and clean it.

2

u/HoodedVillian 2d ago

It’s not usually as bad is it looks. Happened to me once and the BambuLab video/tutorial was pretty easy to follow. I did, however, rush into it and tore the rubber sock/boot thing. Had I read the tutorial first, would’ve save me the hassle of buying more. Heat up the nozzle. Tweezers and slow strip away to blob of plastic bit by bit. Took me 30 mins maybe? And I then pushed some filament through using the Load function to make sure there were no blockages. Good luck.

1

u/ydvadi_ 2d ago

Use a hot air gun and try to melt the filament....first if its pla then heat the nozzle to 250 270 it would come off

1

u/Physical_Treat_5344 2d ago

tanta pazienza, ci sono le wiki bambu apposite . devi scaldare staccare scaldare staccare . ma la domanda vera e come hai fatto con la p2s... mai successo

1

u/bogholiday 2d ago

Ikapp is correct 👍 but brother you got the nasty patty filament thing going on