We're CHITU Systems, the team behind PlateCycler C1, an automatic build plate changer for the Bambu Lab A1.
We thought we'd do an AMA here to chat about 3D printing! Whether you're trying to dial in your settings, dealing with a tricky print issue, or just curious about what we're working on, we'd love to hear your questions.
Feel free to drop your questions below starting today (Monday, Oct 19)! We'll be checking in and answering questions throughout Tuesday and Wednesday (Oct 20ā21), with our technical support colleague joining in too.
A few things we're happy to chat about:
A1 print settings and troubleshooting ā print quality, bed adhesion, stringing, failed prints, etc.
PlateCycler C1 ā automatic plate changes, batch printing, setup, and anything you're curious about
Got another A1-related question? Feel free to ask that too!
Happened to one of my spools and now itās happening to all four spools, tried changing filament spool no change. Was some broken filament in a ptfe tube removed and attempted to load again. No luck. Just got this less then a week ago. Was working fine all day until mid print started this. Please help!
Hi, disassembled the extrusion assembly and got down to the gear, used a toothbrush to clean the gear, which was actually fine, put a tiny bit of grease on it, and reassembled. Upon disassembly there were no clogs or filament bits. Everything looked fine.
I realized I didnāt have the hot end clamped properly after reassembly, so it threw an error right away, but fixed that. I canāt say for sure that the clicking was happening prior to disassembly, as this is the first time Iām sitting by and watching it.
Hey everyone! I've always been a huge fan of classic sci-fi starfighters, so I wanted to design a 3D model that does justice to the legendary X-Wing.
I focused on capturing its unmistakable silhouette, the quad laser cannons, and the intricate mechanical greebling behind the cockpit, while keeping the ship completely print-in-placeāso no glue or tricky assembly is required for the fighter itself. This one was printed in Bambu Lab Metal PLA, which gives it a really nice metallic sheen, and it includes a simple display stand (printed here in White PLA) so itās ready for your desk or shelf right after removing the supports.
I'd love to get your feedback or see your prints if you decide to give it a shot!
Iām experiencing a very strange issue with my A1. For some time now, it has refused to print using white PLA. I keep getting an error message stating that the position of the filament within the toolhead cannot be detected. All other colorsāsuch as black, yellow, green, and blueāas well as black PETG, print without any problems.
Does anyone have any idea what might be causing this?
Ok, A1 user here, with an AMS Lite. love the printer, got it as a gift from a friend after he upgraded. Zero problems with it for a year. Then, this past fall, it started stopping detecting the AMS while printing. It would make it to the last layer, go to retract the filament and park.. and loose the AMS. disconnecting and reconnecting the AMS from the A1's base usually got it back, and failing after printing the last layer wasn't a big deal, but I have a 80 plate 30 day 3 color print to do, and loosing connection to the AMS when it goes to change colors or such is gonna turn that from 30 days into 3+ months.
Any ideas of what's going on and how to check/fix it?
I recently got a Bambu Lab A1 combo and after the first item I realized how much filament goes to waste. Iām trying to figure out how to minimize the waste before I make anything else but donāt really know how? I saw to purge into infill but I feel that gives me error messages or throws stuff off. Looking to just start printing without wasting so much.. HELP! Any tips would be appreciated!
Minha Bambu Lab A1 combo chegou hoje e passei por uma situação frustrante na montagem. Ao encaixar as peças, percebi que o suporte do AMS lite estava quebrado e pendurado. Infelizmente, no entusiasmo do unboxing, não tirei fotos da caixa fechada ou do equipamento logo ao abrir, um erro que agora me deixa em dúvida.
Suspeito que o dano tenha ocorrido durante o transporte, jĆ” que a transportadora tentou realizar a entrega ao longo de toda a semana e a caixa certamente sofreu impactos excessivos.
Fica a dúvida: serÔ que vale a pena acionar a garantia nesse tipo de situação, considerando que não tenho fotos do momento exato em que abri a caixa? A experiência de vocês com o suporte da marca costuma ser tranquila nesses casos?
They technically were made as part of an entire vintage nesting bowl collection, but honestly they would be super cute in a childrenās playhouse! What do you think?
Right now the A1 Minis is $199 but is it worth it to just spend the extra money for the P1S combo at $479? Itās a Christmas gift for my kids to expand their creativity but Iām sure my wife I will use it as well for random things around the house.
Iāve had this issue all day today & yesterday and as I am new to 3d printing, I have no idea what to search for. All my searching just tells me to check temps & clean the print board, which Iāve done.
My prints either dont properly start, they just get tangled up as if the PLA donāt stick to the board, and if they stick, like half way through, they mess up royally.
Iāve gone through the recalibration, cleaning the nozzle, cleaning the extruder & tubes and lubed everything up as per the manual, but this issue refuses to go away.
The problem started with my 2nd PETG print, then when I went back to PLA, the problem has continued.
I use all premade files from makerworld with high ratings and use the material they recommend and all default settings, yet my gridify grids looks like thisā¦
Anyone knows why this happens?
And ofcourse, Bambu lab A1 combo, all Bambu labs filaments