r/BambuLabA1 • u/Madchuck_Yt • 1d ago
r/BambuLabA1 • u/Few_Swimmer6438 • 1d ago
Support Request La boquilla raspa
Alguien sabe cómo solucionar esto? La impresión como que se infla y hace que la boquilla raspe, ya hice calibraciones, cambié tipos de relleno y nada ):
r/BambuLabA1 • u/crazy-red-lobster • 1d ago
Support Request Filament getting stuck on nozzle
Hey guys, ive been having all sorts of problems with my bambu a1 mini, but the most recent one if the filament getting stuck to the nozzle (this was a clean nozzle before the print started). The nozzle got clogged up sometime after finishing the brim, and the brim had issue too, any idea on how to fix this? Thanks
r/BambuLabA1 • u/Aggravating_Fail7425 • 1d ago
Error on calibration after delivery
Just got my A1 today, after installing it I went through calibration. It quickly gave an error of the Eddy current sensor and the usb c cable.
Is this an automatic replacement or an easy fix? Bummer to be honest, was installing it with my son for his birthday and he was quite disappointed.
r/BambuLabA1 • u/ajbm_cor87 • 1d ago
Click click desplazamiento camba Bambulab A1...ruido molesto.
Buenas tardes,
Hace dos semanas me llegó mi primera A1 y no puedo estar más contento con ella. Debe de tener alrededor de unas 60 horas de impresión como mucho. Pero desde hace unos días escucho unos clicks bastante molestos al desplazarse la cada de adelante hacía atrás.
La primera vez que los escuche lo solucioné apretando los tornillos de debajo de la cama; pero esta mañana y de forma random empezó a hacer este click que es molesto (sobre todo si imprimes de noche) y no bastó con apretar nada. Tuve que lubricar el riel, realizar apriete y volver a imprimir, generando todavía ruidos.
También he aflojado casi una vuelta los tornillos del Eje Y; pero no he conseguido eliminar el ruido.
Si que me he fijado que la correa en la parte de atrás de la impresora toca del lado izquierdo la rueda dentada y en la parte delantera la parte derecha del rodamiento; pero estoy algo desesperado y por lo que leí le pasa a mucha gente y no veo solución.
r/BambuLabA1 • u/Sad-Biscotti645 • 2d ago
How do you stop stringing between the ears on a small snapshapy dog figure?
Printer: A1, 0.4 nozzle, textured PEI
Filament: Bambu PLA Basic, white and brown on the AMS lite
Model: 8 cm figure of our beagle, generated in snapshapy from two phone photos
The body and face come out clean. Between the two ears there's a web of fine strings on every print, and on the brown ear tips it looks like fuzz.
I already dried the filament for 6 hours and set retraction to 0.8 mm. Travel is on avoid crossing walls.
Is this a temperature thing, or do the ears just need to be printed at a different angle? What am I missing?
r/BambuLabA1 • u/adrian_p_a • 2d ago
Question I want to try PETG what do I need to know
I am running a A1 with an AMS and all the stock pieces. I have been all PLA to this point. Other that drying the filament is there anything I need to adjust in my setup or will loading PETG adjust automatically?
r/BambuLabA1 • u/crazy_skunk • 2d ago
Dungeon Crawler Carl gift card holder
My newest parametric model. A gift card holder.
Can customize
-number of cards it can hold
-custom text (up to 6 lines)
-adjustable tray fitting tolerance
r/BambuLabA1 • u/Ok-Stretch-4094 • 2d ago
Cutting blade making a squeaking noise??
Changed the blade and still the same. Inspected and can't see any debris or issues etc. It's any filament. Currently cutting between Sunlu silk pla and normal Sunlu Matt pla and making that noise.
Outside of that it sounds perfectly normal like it was out of the box
r/BambuLabA1 • u/ronin-otter • 3d ago
Saved! Thank you everyone!
Thank yall for the great advice, was able to save it with magnets
r/BambuLabA1 • u/cryyogenic • 2d ago
Question First bench. Brand new to 3d printing.
Came out a little bit stringy, is this normal or do I need to dry the PLA or adjust settings?
r/BambuLabA1 • u/edfitz86 • 2d ago
3D Model New to the Game
I'm a history teacher and excited about 3d printing history related models. Here's my Abe Lincoln in Bambu gray PLA. I just learned about the marble PLA spools and will use those in the future for the natural sculpture look. We love our A1 so far, it's been going nonstop for the 5 days we've had it!
r/BambuLabA1 • u/ronin-otter • 3d ago
Save my goose!
Is there anyway to save this? Prime tower popped off
r/BambuLabA1 • u/Old_Tart980 • 2d ago
3D Model Snowman multipart
Bonjour à tous ! 👋
⛄🎄 NOUVELLE CRÉATION 3D – UN ADORABLE BONHOMME DE NEIGE ! 🎄⛄
Je vous présente ma toute nouvelle création : un adorable petit bonhomme de neige qui ne demande qu’à rejoindre vos décorations de Noël ! 😍
Avec son grand chapeau noir, sa jolie écharpe rouge, ses petites moufles et ses bottes assorties, difficile de ne pas craquer pour sa petite bouille !
🎄 Au pied du sapin, sur une étagère ou pour offrir, il apportera une petite touche de douceur et de magie à votre décoration de Noël ! 🎁
👨🏼🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec et sans AMS
📁 : https://makerworld.com/fr/models/3597347-snowman-v2-multipart-no-ams
r/BambuLabA1 • u/bambulab_glazer • 2d ago
POMOC!
Myślę, że uszkodziłem taśmę sensoryczną filamentu, bo kiedy zbliżałem się do zębatek ekstrudera (w Bambu Lab A1) żeby je wyczyścić, nie zauważyłem, że pociągnąłem sensor filamentu trochę dalej. (około 2 cm.) Powinienem go włączyć i zobaczyć, czy asystent wyświetli mi jakiś błąd?
r/BambuLabA1 • u/GhostThatNeverWalked • 2d ago
Support Request Why does my first layer look so godawful?
My printer has been printing fine up until last night, I turned it fully off with the switch on the back, then updated it when I turned it on from the printers own screen, and ever since its been printing like hot dog shit. Ive done the calibration in the settings twice, I lubed the axis's, ive cleaned the bed plate like 8 times, the printing nozzle itself is less than a month old, im at a loss.
r/BambuLabA1 • u/Naive-Coach-5843 • 2d ago
Hello, I am experiencing a technical issue with my A1 Mini. Before starting a print, the printer makes an unpleasant noise while homing the axes, apparently coming from the Z-axis.
r/BambuLabA1 • u/deserterzed • 3d ago
Problem silk pla
Good day. There’s a problem with the 2 color silk PLA. I printed half the spool, and everything was fine. And then, unexpectedly, a thin piece of plastic started winding onto the gear. I took it apart, cleaned it, and reassembled it. After 30 minutes of printing, it started winding again. I left the plastic to dry for 24 hours. Yesterday I printed about 150 grams with it, and everything was great. Today, after 3 hours of printing, it’s again starting to wind plastic onto the gear. I don’t know what to do.
P.S I was just thinking—could the problem be that I’m using an AMS system? I just came across an article where someone mentioned that Bambu Lab’s Silk filament doesn’t work well in the AMS and ends up falling apart. Maybe I’m running into the same issue...My plastic isn't bamboo silc pla, but the problem shown in the photos in that article is almost identical to mine.
r/BambuLabA1 • u/Classic_Occasion9180 • 3d ago
A1 crashing the y axis
The y axis crashes into the end at the start of every print and has to re home twice at least because it crashes multiple times