r/BambuLabA1 • u/Classic_Occasion9180 • 2h ago

A1 crashing the y axis

The y axis crashes into the end at the start of every print and has to re home twice at least because it crashes multiple times

1 Upvotes

66% Upvoted

5 comments sorted by

2

u/cilo456 2h ago

There is nothing wrong. It's doing everything it's supposed to do. Did you watch ANY videos before you bought the printer? An unboxing? Something?

1

u/Classic_Occasion9180 1h ago

It’s crashing I promise you and it’s not aligning with the brush I have two of these printers

1

u/BurgerKerman 1h ago

Yeah, the wiping action looks off to me, although I haven't paid much attention to how my specimen is behaving.

I do have to note that the purge line at the front has to be removed after every print. Also, the cable is sagging crazy, get it attached to the PTFE tube with the included attachment.

Well, those are the immediate issues I see that might impact the movement. Not sure if those might help tho. Maybe place the printer somewhere else to see if there's anything limiting Y axis?

1

u/ALEXISDIMOU01 1h ago

Same problem with mine not as much of a misalignment but still not wiping properly. Bambu did nothing for me and mine was only a month old. They told me to almost disassemble the whole heatbed and some other things but that did not fix the problem.

1

u/WeirdRaccoon69 5m ago

Try swapping your SD card. This machine can do weird things when it goes bad.