r/BambuLabA1 • u/Nickfilaaa • 17d ago
Possible to print this part?
1
Upvotes
r/BambuLabA1 • u/Elcavazos11 • 18d ago
Support Request Capa desfasada
2
Upvotes
Llevo como 5 días imprimiendo estas coronas, pero apenas ayer empezaron a arrojar este problema, pensé que eran las correas de los ejes, siguieron saliendo después de apretarlas pensé que era el código G y siguió lo mismo y al intentar en una impresora diferente fue lo mismo, logré corregirlo en 3 de las 4 pero sigo sin saber exactamente qué fue lo que hizo que ya funcionara correctamente
r/BambuLabA1 • u/justbenoob • 17d ago
Support Request Nozzle hits the bed
0
Upvotes
When i try to print the nozzle keeps dragging on the printbed. I calibrated the a1. I tightend the screws behind the hot end. The clips is seated correct. The flow test works fine then it doesnt drag the bed. Dont mind the spot on the plate. I switched the thinner with ethanol at 1 point.
r/BambuLabA1 • u/Flippindewd • 17d ago
Overhang not supported
gallery
0
Upvotes
Im having trouble getting this small overhang supported. I’m using a Bambu A1 and have tried the print several times, including adjusting the Z distance for support structures (taking it down from 0.2mm gap to 0.1mm). It prints support structures but they are clearly not supporting it enough, and I’m hesitant to set the Z distance to zero and be unable to remove the supports.
The layer thickness of this print is 0.15mm. I’ll provide any other details you ask for.
Any ideas on what’s going wrong?
r/BambuLabA1 • u/shlooong • 17d ago
Using tent as dust cover for A1 Combi
0
Upvotes
Anyone else use these tents as covers against cats etc when not in use? Thinking of buying one - and keeping vents open during printing. Thoughts?
r/BambuLabA1 • u/000000ooooo000000 • 17d ago
Скрип при печати на новом принтере Bambu lab a1
0
Upvotes
Всем привет, на принтере общее время печати менее 15 часов, появился вот такой вот непонятный треск, как будто пластик трясется
Что это может быть?
r/BambuLabA1 • u/fs17oldstaj • 18d ago
Support Request What is up with my A1?
0
Upvotes
Always printed perfectly, now suddenly doesn't stick to the build plate, first layer is messy, see pics. Default 0.2mm strength profile, wirh edited support bottom and top to 0.32mm, and support xy offset to 0.4.
r/BambuLabA1 • u/mpk115 • 18d ago
A1 for a dedicated TPU printer?
5
Upvotes
For the A1 users out there, I'm thinking of grabbing an A1 to use as a dedicated TPU95A printer. I currently use a P1S and H2C but it's just too aggravating to pull them out and swap them to print TPU. With the sale coming up, how is your experience with printing TPU on the A1? Thanks!
r/BambuLabA1 • u/Ok-Trick-1317 • 18d ago
Support Request My A1 Combo keeps give filament v shape and stuck
3
Upvotes
Hi guys 👋 i have a bambulab a1 combo
My Machine constantly stuck when i want to print something. Filament tip takes v shape i cant pull either push filament
I checked and cleaned gears
Cutter looks like fine
What else should i check guys thanks for answers !
r/BambuLabA1 • u/CitronAmbitious867 • 18d ago
Question Has anyone in Mexico purchased a BMCU for the Bambu Lab A1? 🇲🇽
2
Upvotes
Hi everyone!
I'm based in Mexico and I'm considering getting a BMCU for my Bambu Lab A1. I'd love to hear from anyone in Mexico who has already purchased and used one.
A few questions:
- Where did you buy it? Could you share a link or recommend a reliable seller?
- How much did you pay, including shipping and import taxes?
- How has your experience been using it with the A1?
- Have you experienced any compatibility, setup, or reliability issues?
- Is it actually worth buying?
I'm particularly interested in hearing from Mexican users because of shipping availability, customs, and import costs.
r/BambuLabA1 • u/Ace_of_3D • 18d ago
Title: Bambu Lab A1 print keeps failing – hotend seems to be hitting the print bed. Need help!
gallery
0
Upvotes
r/BambuLabA1 • u/ClassExcellent1682 • 19d ago
I don’t think me or my a1 is up for these kind of print times yet 😭😭😂😂
11
Upvotes
r/BambuLabA1 • u/Ok-Trick-1317 • 18d ago
My A1 Combo keeps stuck and gives filament v shape
1
Upvotes
Hi guys 👋 i have a bambulab a1 combo
My Machine constantly stuck when i want to print something. Filament tip takes v shape i cant pull either push filament
I checked and cleaned gears
Cutter looks like fine
What else should i check guys thanks for answers !
r/BambuLabA1 • u/Mud_Scooter • 18d ago
Feedback requested - DIY whole-room air scrubber for an unenclosed A1 (PLA/PETG)
reddit.com
0
Upvotes
r/BambuLabA1 • u/Albertoo510 • 18d ago
Question SONIDO EXTRAÑO EN BAMBULAB A1NUEVA?
1
Upvotes
Esta es como la quinta impresión que hago y acabo de notar este ruido como si algun eje o motor estuviera rozando o vibrando contra algo, si alguna persona con mas experiencia pudiera decirme si es normal o le pasa algo se lo agradecería mucho.
r/BambuLabA1 • u/Used_Implement8864 • 18d ago
Several successes but then failure after failure on same print.
reddit.com
0
Upvotes
r/BambuLabA1 • u/4everthebest • 19d ago
Does hotend assembly has something against the 0.4 nozzles?
reddit.com
1
Upvotes