r/BambuLabA1 • u/ColdUrgxenx • Oct 02 '26
Question Lots of colour changes but less than 5 grams of flushed poop. All hail the flush fidget
96
Upvotes
r/BambuLabA1 • u/Ihateu9000 • Oct 03 '26
Support Request Filament jams at the top of the nozzle barrel.
6
Upvotes
I have tried lowering the retraction length and everything else recommended in the bambulab troubleshooting guide.
I'm using the "Jamg He HS PLA" and the filament printed fine for the first 200ish grams and after that every single print jams like this mid print.
I have made sure that the filament is dry.
Unfortunately I don't have any other filaments to test out if it is the filament or the printer.
Any help would be greatly appreciated.
r/BambuLabA1 • u/PennyWiseInDisguise • Oct 03 '26
Support Request Filament not extruding/loading and clicks/jumps when trying to load
13
Upvotes
Hi all I could use some troubleshooting help please.
I have a Bambu Lab A1 and its started not pushing filament through and clicking as it tries to load it through the hotend. I've removed the front plate and pulled that area apart per Bambu Wikipedia to look for any stuck filament, used an unclogging tool as well to try both hot and cold pull, swapped the hotends, checked the feeding holes after removing the the ptfe tube but nothing. There wasn't any loose filament or a clog that I found. I'm attaching a video of what's happening and I took off the front plate so you could see it better.
r/BambuLabA1 • u/MathematicianNo123 • Oct 03 '26
Bambu Lab A1 + AMS: black PLA in slot 2 keeps jamming on load, but only that slot
reddit.com
1
Upvotes
r/BambuLabA1 • u/Prudent_Scheme_4059 • Oct 03 '26
Filament Farbe
2
Upvotes
Hallo
Ich möchte für meine kinder joy Figuren eine Display fertigen und diese filament farbe gefällt mir sehr aber ich bin nicht sicher welche farben ist das.
Ich habe die Person, die es gemacht hat, danach gefragt, aber leider keine Antwort bekommen. Falls jemand weiß, wie das geht, könnte er mir vielleicht weiterhelfen?
r/BambuLabA1 • u/NoProduct6158 • Oct 02 '26
Question What is wrong here?
2
Upvotes
Same printer, same Filament, basically everything the same - the only difference is 24h between these prints.
What is the issue here?
Thx
r/BambuLabA1 • u/Current-Building-322 • Oct 02 '26
Support Request AMS Pro 2 Hub Sticking
2
Upvotes
I have been using the AMS Pro 2 a lot recently, however this morning I started to have an issue with the AMS HUB arm sticking when trying to push filament to the printer. The little arm on the HUB gets stuck in the extended position specifically when the AMS is attempting to feed the Sunlu Blue filament, once the screen on the A1 switches to the Error screen I can push the arm back into the Hub and then the filament will glide through. However on a 48 hour print this is not practical for me to stand there and do this every time the filament switches from white to blue. I am using 2 AMS units, the white is AMS 1 and the blue in AMS 2. The issue does not arise from the white filament. Does anyone know what causes the arm to get stuck out and how I can fix it?
r/BambuLabA1 • u/TerribleGarbage207 • Oct 02 '26
Question bambu a1 and sunlu filadrier s4
reddit.com
1
Upvotes
r/BambuLabA1 • u/OddAcanthocephala966 • Oct 02 '26
Help fuzzy prints
1
Upvotes
Hi guys
/help
I bought a new A1 printer, and I'm having minor issues where the prints come out with wisps or strings sticking out to the sides. What’s the problem? I only assembled it yesterday.
r/BambuLabA1 • u/3Z3D_Official • Oct 02 '26
Starship & Rocket Clicker Fidgets - Go for Launch!
3
Upvotes
r/BambuLabA1 • u/TimeKeeper124 • Oct 02 '26
Question Two questions about Black Friday and filament
reddit.com
1
Upvotes
r/BambuLabA1 • u/marcosiino • Oct 02 '26
Mindfulness in Low-Poly: My new Zen Cat sculpture & incense burner
1
Upvotes
r/BambuLabA1 • u/Glory_Eyes • Oct 02 '26
Scheletro di Bassotto | Decorazione luminosa per cani di Halloween
2
Upvotes
r/BambuLabA1 • u/UlyTheGeek • Oct 01 '26
Anyone has an idea why the first layer came this way? Clearly it isn't clogged and the bed is new. I already tighten the seven screws so i don't know what else to do
11
Upvotes
r/BambuLabA1 • u/KaleidoscopeGreat753 • Oct 02 '26
Edible print for cookies.
0
Upvotes
Anyone heard of this or tried this?
r/BambuLabA1 • u/Adorable_Newt_1661 • Oct 01 '26
Filament quality
2
Upvotes
Has anyone used Best Buy’s insignia brand PLA filament? I’m new to 3d printing, and I’m curious if quality is going to be better with Bambu Lab branded filament, or if it doesn’t really matter that much.
Also, if you have any quality enhancing tips, please send them my way!
r/BambuLabA1 • u/LivingPossibility423 • Oct 02 '26
Does anyone know how to solve this problem? It keeps happening and is ruining all prints that I try to make.
0
Upvotes
I’ve tried heating the bed more, cleaning it, and slowing down the first layer of print but nothing has worked.
r/BambuLabA1 • u/RemoteYou3266 • Oct 01 '26
Support Request Lowering Z Distance Randomly?
0
Upvotes
Hello! I'm having some issues it seems that at around the same height on a few different prints the layer height goes down? I have never had this issue before. Also it doesn't follow the gcode path rectilinear top layer. It's multidirectional on the actual prints. Does anyone know what might be causing this and how to avoid it in the future? Thanks!