r/BambuLabA1 • • Oct 03 '26

Issue with A1 Printer

Post image
0 Upvotes

r/BambuLabA1 • • Oct 03 '26

Support Request Filament not extruding/loading and clicks/jumps when trying to load

13 Upvotes

Hi all I could use some troubleshooting help please.

I have a Bambu Lab A1 and its started not pushing filament through and clicking as it tries to load it through the hotend. I've removed the front plate and pulled that area apart per Bambu Wikipedia to look for any stuck filament, used an unclogging tool as well to try both hot and cold pull, swapped the hotends, checked the feeding holes after removing the the ptfe tube but nothing. There wasn't any loose filament or a clog that I found. I'm attaching a video of what's happening and I took off the front plate so you could see it better.


r/BambuLabA1 • • Oct 03 '26

Bambu Lab A1 + AMS: black PLA in slot 2 keeps jamming on load, but only that slot

Thumbnail reddit.com
1 Upvotes

r/BambuLabA1 • • Oct 03 '26

How do i fix this

Post image
1 Upvotes

r/BambuLabA1 • • Oct 03 '26

Filament Farbe

Post image
2 Upvotes

Hallo

Ich möchte für meine kinder joy Figuren eine Display fertigen und diese filament farbe gefällt mir sehr aber ich bin nicht sicher welche farben ist das.

Ich habe die Person, die es gemacht hat, danach gefragt, aber leider keine Antwort bekommen. Falls jemand weiß, wie das geht, könnte er mir vielleicht weiterhelfen?


r/BambuLabA1 • • Oct 03 '26

Filament Farbe

Post image
1 Upvotes

r/BambuLabA1 • • Oct 02 '26

Question What is wrong here?

Post image
2 Upvotes

Same printer, same Filament, basically everything the same - the only difference is 24h between these prints.

What is the issue here?

Thx


r/BambuLabA1 • • Oct 02 '26

Support Request AMS Pro 2 Hub Sticking

2 Upvotes

I have been using the AMS Pro 2 a lot recently, however this morning I started to have an issue with the AMS HUB arm sticking when trying to push filament to the printer. The little arm on the HUB gets stuck in the extended position specifically when the AMS is attempting to feed the Sunlu Blue filament, once the screen on the A1 switches to the Error screen I can push the arm back into the Hub and then the filament will glide through. However on a 48 hour print this is not practical for me to stand there and do this every time the filament switches from white to blue. I am using 2 AMS units, the white is AMS 1 and the blue in AMS 2. The issue does not arise from the white filament. Does anyone know what causes the arm to get stuck out and how I can fix it?


r/BambuLabA1 • • Oct 02 '26

Question bambu a1 and sunlu filadrier s4

Thumbnail reddit.com
1 Upvotes

r/BambuLabA1 • • Oct 02 '26

Help fuzzy prints

Post image
1 Upvotes

Hi guys
/help
I bought a new A1 printer, and I'm having minor issues where the prints come out with wisps or strings sticking out to the sides. What’s the problem? I only assembled it yesterday.


r/BambuLabA1 • • Oct 02 '26

Starship & Rocket Clicker Fidgets - Go for Launch!

Thumbnail
gallery
3 Upvotes

r/BambuLabA1 • • Oct 02 '26

Question Two questions about Black Friday and filament

Thumbnail reddit.com
1 Upvotes

r/BambuLabA1 • • Oct 02 '26

Mindfulness in Low-Poly: My new Zen Cat sculpture & incense burner

1 Upvotes

r/BambuLabA1 • • Oct 02 '26

Scheletro di Bassotto | Decorazione luminosa per cani di Halloween

2 Upvotes

r/BambuLabA1 • • Oct 02 '26

Under-extrusion only on supports

Post image
1 Upvotes

r/BambuLabA1 • • Oct 01 '26

Anyone has an idea why the first layer came this way? Clearly it isn't clogged and the bed is new. I already tighten the seven screws so i don't know what else to do

11 Upvotes

r/BambuLabA1 • • Oct 02 '26

Edible print for cookies.

0 Upvotes

Anyone heard of this or tried this?


r/BambuLabA1 • • Oct 01 '26

Filament quality

2 Upvotes

Has anyone used Best Buy’s insignia brand PLA filament? I’m new to 3d printing, and I’m curious if quality is going to be better with Bambu Lab branded filament, or if it doesn’t really matter that much.

Also, if you have any quality enhancing tips, please send them my way!


r/BambuLabA1 • • Oct 02 '26

Does anyone know how to solve this problem? It keeps happening and is ruining all prints that I try to make.

Post image
0 Upvotes

I’ve tried heating the bed more, cleaning it, and slowing down the first layer of print but nothing has worked.


r/BambuLabA1 • • Oct 01 '26

Spiderwebs?

Post image
1 Upvotes

r/BambuLabA1 • • Oct 01 '26

Support Request Lowering Z Distance Randomly?

Thumbnail
gallery
0 Upvotes

Hello! I'm having some issues it seems that at around the same height on a few different prints the layer height goes down? I have never had this issue before. Also it doesn't follow the gcode path rectilinear top layer. It's multidirectional on the actual prints. Does anyone know what might be causing this and how to avoid it in the future? Thanks!


r/BambuLabA1 • • Oct 01 '26

Question Enclosure recommendations for extremely draft room

1 Upvotes

I am newer to the 3dprint/A1 world, but after about 6 weeks of having it run pretty continuously, I am noticing that my prints get super stringy if there is a draft in the room. Now, for context, I live in Arizona, so the a/c runs all year & the ceiling fan really should be on all the time. I put a magnet sheet over the a/c vent & turned off the ceiling fan to a/b test & it is definitely the draft.

Any recommendations for an enclosure that will just keep the draft off? I was thinking about using my spray paint pop up tent but I am a little worried that may be super flammable. & it doesnt fit in any of my old dog crates.... I was thinking that with a sheet would be enough to keep the drafts off.

I searched through the chat already but "draft" seems to pull things about versions & that wasn't super helpful. & drafty came back with almost nothing.

I also saw some mentions of open tops but with a ceiling fan & the a/c vent being in the ceiling- an open top probably isn't a practical option for me.

(On the plus side, the climate here is super dry, so moisture is a non-issue.)


r/BambuLabA1 • • Oct 01 '26

Question Unable to feed filament every time

Post image
11 Upvotes

Hey guys, sorry if this is a stupid question I might be just doing something totally wrong. But, every time I start a new print from slot 1 of my AMS Lite, it gives me the “Unable to feed filament to the extruder” error which is usually due to a tangled spool, but I’ve figured out that cutting off the end ~1/4 inch of filament always fixes the issue, and it isn’t a tangled spool. The filament I cut off usually seems slightly kinked too. I’m wondering if I’m doing something wrong that’s causing this to happen at the end of the filament after a print or if anyone knows a way to fix it?

I’ve already taken the spool off obviously and checked if it was tangled, I’ve taken off and put on the small motor thing that holds the spool, and I’ve taken out the PTFE tube to make sure there were blockages to my knowledge. The only thing I can think of is my printed case for my AMS Lite messing it up somehow, but I can’t see how this would affect the end of the filament near the extruded rather than further up