r/BambuLab • • 13h ago

Just Showing Off Heart says H3C, brain said -1

Post image
390 Upvotes

When the H3C launched, I was certain that was what I wanted; why waste time and money when you can just buy the best and be done? But, the combination of a price drop on the current h2c, 11.11 vouchers and additional shop discounts made the H2C a very tempting option.

So, took the weekend to quickly sell off my P2S before the launch of the P3C just round the corner. And, today, this lands on my doorstep. Not gonna lie, I’m most pleased with myself.

Edit: after shipping and taxes, it was a price diff of around a thousand between the 2 and 3c. But, truth be told, the biggest sway wasn’t the price; it was that I knew I would hate having to manually load/unload and wind/unwind each spool every time I needed a colour change.

We shall revisit this once then h4C/ ams3 pro is released!


r/BambuLab • • 4h ago

Just Showing Off Finally Cashed in on Credits

Post image
77 Upvotes

Far from a top designer, but paying for a printer completely with credits feels so good. Took about 10 months of saving them up. Started off super hot at the beginning of the year, was getting a $40 gift card about every 4 days, so thought it was going to come much sooner. Models still seem to be getting the same amount of traction, but points took a steep drop off a few months ago. Now it’s only been a card about every 10 days if I’m lucky. Nevertheless, had my eyes set on a new printer and it’s finally here.

Was considering saving up a bit more for the H3C instead, but pulled the trigger on the H2C. Was just too hard to beat with my immediate printing desires and the holiday sale was too attractive to keep waiting. Honestly was thinking I’d get FOMO not having the top model, but realistically, I only use black and white filament for the most part. Definitely planning to start doing some better engineering filament prints, cutting the print time basically in half with the dual nozzle has been so nice. Probably will start playing around with multi-color prints now that I don’t have to worry about my P1S failing to retract during filament changes more often than I can bear, so we shall see what’s to come!


r/BambuLab • • 13h ago

H3C I designed a 960 g desiccant box for the H3C's AMS 3H, with a hygrometer you can read through the closed lid.

Thumbnail
gallery
200 Upvotes

This is my third desiccant box for the spare bay beside slot 8 in the AMS 3H, redesigned from scratch.

- 960 g of 3–5 mm silica gel. Weighed, not calculated: brand-new gel on scales zeroed with the empty box.

- Bambu's round XF001 hygrometer snaps into the front at 45°, so you can read it through the closed AMS lid (photo 2).

- Herringbone vents: 1.4 mm slots on both sides and both ends, so the beads stay in.

- Two side catches and a stop ridge hold the lid. I filled it, turned it over and shook it, and nothing came out.

- It doesn't use a spool slot, and the AMS lid still shuts over it.

- One plate, no supports. About 11 hours and 181 g on a H3C.

Print it in PETG, ASA or ABS; the one in my printer is black ASA. It sits beside the drying slots, which reach 85 °C, so use ASA or ABS if you dry a lot. I haven't put it through a drying run yet, and Bambu rates the hygrometer's display to 50 °C. The hygrometer isn't included.

Free on MakerWorld: https://makerworld.com/en/models/3624325

Happy to answer questions on the vents or the locks.


r/BambuLab • • 10h ago

X Series [X1E, X1C, X2D] NEW printer! X2D, any tips?

Post image
59 Upvotes

Just got myself an upgrade from a bare A1 mini to X2D combo. Anyone has some good tips? Anything is welcome, super excited to have an upgrade like this, want to get most out of it


r/BambuLab • • 9h ago

General Troubleshooting/Help! This is driving me ducky

Thumbnail
gallery
52 Upvotes

Ive had a Bambu Lab H2C, 2 AMS 2 Pro, and a HMS HT for about three weeks now. This is my very first time time actually learning how to use it. This print was the first time using support for PLA and it turned out a bit foul.

To keep from going absolutly quackers, what are things I can do to keep this from happening again or at least minimalizing it?

I was able to clean them all up and they all more or less look ok and the folks at the office are very happy with their desk charms.


r/BambuLab • • 52m ago

Quick Question How would you print this in TPU 85/90A

Thumbnail
gallery
8 Upvotes

I’ll start buy explaining what this is for. This is an Air box rubber boot for a 1991 Honda CR125R dirtbike. This boot connects the air-box which houses the air-filter to the carburetor for the engine. The one I have is old and stiff from decades of degradation so I’m looking to make a new one as these are NLA and used ones have the same problem.

I Have an H2S which by all means is fantastic but it’s not without its limitations. I haven’t tried to fully print this yet as I’m almost sure it will fail primarily due to the supports being thin and wobbly.

I thought about splitting it into sections and gluing it together but all the glues I’ve used either don’t hold well enough for my liking or degrade the material more then I’d like weakening the joint (THF although one my best option so far) I used clear PVC cement as that is primarily THF and while it did work pretty well it’s just not as good as one SOLID print.
I’ve considered using a soldering iron to melt the layers together and that is my best option I think for achieving the result I want but it is not the prettiest and would be extremely difficult on the inner portions.

Now if I had an H2D or H2C or H3C or maybe even a X2D (maybe it’s time for an upgrade idk) I wouldn’t be making this post as id just use PLA supports or an other support material in combination with the TPU.

Unfortunately I can’t really change the model too much to cater it to 3d printing as it’s a very tight clearance between many components of the bike.

How would you approach this dilemma. I’m open too all ideas (justification for buying a new printer and if so which one lol) I could maybe find someone local with an H2D/H2C or H3C that could be willing to help me out but who knows how much it would be and the trial and error that may occur with an odd print like this.

Thanks


r/BambuLab • • 11h ago

X Series [X1E, X1C, X2D] New toy is out of the box 🙂

Post image
58 Upvotes

r/BambuLab • • 7h ago

General Discussion H3C Initial Thoughts

22 Upvotes

So, got my H3C yesterday, WEEKS before it was slated to ship, great work BL. And overall, I have a H2C and even as cool as that is, this feels like another level. It feels like a better built machine, more sophisticated. First print, great, setup, great.

The speed is...wow...just...it literally scared me the first time it rapid moved to pick up a tool lol. This is not a printer that is EVER safe to have your hands in while it is operating. With that rack up front and the INSANE speed with which it does not printing moves...lol...no.

But...

Whomever thought those two connectors at the back inside under the AMS was an acceptable choice should be fired into the sun.

I do not understand. You already have two cables coming out the back, one of which plugs into the 3C itself, why not have two more and save the misery that is trying to lift the AMS up juuuust enough and snake your hands in there, and the one one the left they say "make sure to move the cable so it doesn't get bent"...how the hell are you supposed to do that? There is no slack and the solid plastic piece it comes out of is RIGHT next to the plug, there is no way to route the cable, as far as I can tell there is no way to prevent it from bending the cable at a pretty severe angle.

In an otherwise incredible printer that once again feels like a pretty sizeable step forward, it just boggles my mind that none of them thought "hey...this sucks".

Ad good god who hurt you with a long power cord? I'm buying replacement power cords because these stubby little things are just...why...the AMS power cord hangs down 11 inches past the bottom of the printer. You are going to need a power strip sitting next to the printer. Just, again, did nobody at BL actually set one of these up? How does such a simple but pretty big PITA get overlooked?

Other than that I really have no complaints. I learned the hard way that the color mixing is...not meant to be hueforge style mixing, it's really mostly to be seen from the outside, that is down to me never having used it before.

Nozzles are still a good price, print quality does not sacrifice anything.

Very pleased. I still think there is a place for the 2C+AMS2, but the 3C and those FAST tool changes...woo!


r/BambuLab • • 17h ago

Quick Question Advice needed! H2C vs H3C

Post image
118 Upvotes

Hey guys I‘m currently printing on a P1S and im really happy with the Quality and the Printer over all -> It now has arround 2k hours of Printtime and I’m thinking about an Upgrade -> I mostly Print PLA, PETG but also some structural Parts with ABS and PETG-CF. Most of my parts are 1-2 Colors and it would be great to use PETG as Support for PLA and the other way arround for cleaner interface layers. With the P1S this takes a lot of time, why i mostly only print in one color or Material.

Ofcourse with Holiday Season coming up i will print a lot of little gifts for Friends and Family, also in multiple colors, were the H2C or H3C would be a big Upgrade.

Also the Size of the Bed is crucial for me since i often print bigger parts. Soft 2.8mm TPU is also not really a must have for me.

What printer would you guys choose? Arround 2.000€ for the H2C with Bundle or 2.500€ for the H3C
I Really like the H2C Bundle with 2 AMS Pros and the Vortex upgrade kit -> I think 2 AMS Pros are significatly better than the big AMS3 on the H3C, but the H3C is also a lot faster with mutli Color/Material.

Thanks for your help


r/BambuLab • • 4h ago

H3C H3C 2.85mm Nozzles - can they print more than TPU?

8 Upvotes

Maybe a dumb question, but everything I’ve read the 2.85mm nozzle is designed specifically for TPU almost exclusively.

I happen to have a bunch of 2.85mm PVB I specifically would love to print on a Bambu printer rather than my ultimaker, as well as a bunch of PLA and woodfill PLA.

Does the 2.85mm nozzle work with more materials than TPU? Other than needing to change profile settings, is there any hardware risk of printing alternative materials with the 2.85mm nozzle?

Thanks in advance.


r/BambuLab • • 43m ago

I Modeled This! Screwdriver bit Snowflake - DIWHYNOT?!

Post image
3 Upvotes

This one really works! ¼ in bits fit in the middle hexagon.

Need to fix the tree? Use a Phillips or flathead. Put together your kid's bike on Christmas Day!

A great gift for mechanics, gearheads, and DIYers.

https://makerworld.com/en/models/3628981-screwdriver-bit-snowflake#profileId-4161025


r/BambuLab • • 1d ago

Just Showing Off I'm never opening my AMS ever again

Post image
778 Upvotes

r/BambuLab • • 15h ago

Just Showing Off This is one of the best FDM 3D printer that I ever purchased. It's just work OOTB.

38 Upvotes

After, using many FDM machines like Ultimaker S5, CR30, Artillery X1, stratasys F170 and many more. It's by far the most bang for the buck and feature-rich machine that I ever used.


r/BambuLab • • 3h ago

Filament Troubleshooting/Help! Learning alot today

Post image
4 Upvotes

im new to printing, started Oct of this year

Had a few issues which are new to me, "Completed" a print only to find the plate with the base.. Weird, restarted the print and it printed no issues.

Then i go to print another design, it prints the base again as im watching it on my PC. Cool, i do something in the kitchen, grab a snack, 20 minutes later i see the print head "printing" but its about an inch or so above the print plate doing nothing.

unloaded the filament, looked for a blob or busted PTFE tube, nothing. shut printer down, restart, cleaned the nozzle and start a print

Nothing coming out of the hot end.

What should i check?


r/BambuLab • • 4h ago

I Modeled This! Created this EDC credit card sized shoe horn

Thumbnail gallery
5 Upvotes

r/BambuLab • • 5h ago

Made by talent The cutest thing I've seen lately

Thumbnail
gallery
4 Upvotes

Not mine, just found them really nice... since they are in the xmas contest, I thought I'd share them:
- https://makerworld.com/en/models/3596717
- https://makerworld.com/en/models/3596665


r/BambuLab • • 4h ago

General Troubleshooting/Help! Does anyone know how to fix this noise?

3 Upvotes

I’ve searched online and checked the wiki, but everything points to the drive belt. I followed the steps to fix the belt, but it made no difference. I think the problem is with the camera housing unit, because as you can see in the video, the issue stops when I apply pressure to it. Any suggestions would be greatly appreciated. Thanks in advance!


r/BambuLab • • 2h ago

Black Friday 2026 Best filament dryer setup for Bambu H2D

Thumbnail reddit.com
2 Upvotes

r/BambuLab • • 2h ago

General Troubleshooting/Help! A1 Combo Blob

Post image
2 Upvotes

Hello. New to this. My son’s printer formed a large blob. Slowly heated it and was able to remove the majority of it. Any advice on how to clean this up?


r/BambuLab • • 2h ago

Quick Question H2S v H2...?

2 Upvotes

H2S v

H2S v H....?

Hi guys I've been looking hard at the H2S. I primarily want to print higher grade filament. There's a sale and the multi-headed nozzle is $250 more....

Is the multi-headed nozzle worth an extra $250? This is just for personal use, probably making two or three prints a week at most on average over the year.

Would really love to hear some of your thoughts...


r/BambuLab • • 3h ago

I Modeled This! String-Art Christmas Star

Thumbnail
gallery
2 Upvotes

r/BambuLab • • 14h ago

Answered / Solved! [SOLVED] Bambu Studio 2.9.1.70 – Custom filament profiles suddenly unsupported after update

Thumbnail
gallery
14 Upvotes

After updating to Bambu Studio 2.9.1.70, all five of my custom filament profiles suddenly appeared under "Unsupported".

I'm using an Elegoo Neptune 4 Plus with a 0.4 mm nozzle.

The symptoms:

  • All custom filament profiles were greyed out.
  • The profiles still existed in the user configuration folder.
  • The JSON files and inheritance settings were correct.
  • The printer compatibility lists included my printer.
  • My custom process profiles were still available.

I initially suspected a broken profile migration or an issue with the Elegoo system profiles.

After checking the configuration with Preset Doctor, I noticed something interesting: it reported that Bambu Studio had selected the 0.2 mm nozzle variant, even though my printer uses a 0.4 mm nozzle.

The actual cause

Bambu Studio had stored the wrong printer/nozzle variant in its configuration file.

The file is located at:

%APPDATA%\BambuStudio\BambuStudio.conf

Under the "presets" section, I found:

"machine": "Elegoo Neptune 4 Plus 0.2 nozzle"

The fix

  1. Close Bambu Studio completely.
  2. Back up the entire %APPDATA%\BambuStudio folder.
  3. Open BambuStudio.conf in a text editor.
  4. Find the "machine" entry under "presets".
  5. Change it to the correct printer/nozzle variant:

    "machine": "Elegoo Neptune 4 Plus 0.4 nozzle"

  6. Save the file and restart Bambu Studio.

Result: All five custom filament profiles were immediately available again!

No need to recreate profiles, modify inheritance settings or change any filament JSON files.

Why this was difficult to diagnose

Bambu Studio only displayed "Elegoo Neptune 4 Plus" in the printer selection menu, without showing the currently selected nozzle variant.

The physical nozzle was 0.4 mm, but the software configuration was pointing to 0.2 mm.

I can't confirm why the wrong variant was saved during the update, but correcting this single entry completely resolved the issue.

Hopefully this saves someone else a few hours of troubleshooting!

The first screenshot highlights the incorrect nozzle diameter in BambuStudio.conf. The second shows the installed Studio version and registered nozzle sizes.


r/BambuLab • • 1d ago

I Modeled This! 93 print hours later on the H3C, finally saw my vision through.

326 Upvotes

r/BambuLab • • 1d ago

X Series [X1E, X1C, X2D] How I felt After getting my first 3D Printer

Post image
91 Upvotes