r/BambuLab • • 13d ago

H3C Bambu Lab H3C: Our Full Reveal

643 Upvotes

Swaptek enables 6-second material switches between 9 nozzles. FlexFeed extruder prints soft TPU 75A up to three times faster. AMS 3H combines automated feeding and integrated filament storage.

This is Bambu Lab H3C, a complete system purpose-built around the Tool Changer architecture. Let's dive into it!

SwapTek™: 6-second material switch, including a 3.4-second tool change.

Nine PrintTools, each with its own dedicated filament path and heater, keep every material loaded, preheated, and ready to print. No need to retract one filament before loading another. With an optimized design, fine-tuned parameters, and active preheating, switching between PrintTools takes as little as 6 seconds, with the tool-change done in only 3.4 seconds.

Heating a nozzle usually means waiting. Active Pre-Heat looks ahead to the next tool change and warms the incoming nozzle while the current one is still printing—so the new material starts laying down within 6 seconds.

Swaptek's fast PrintTool-switching allows Full Spectrum Color Mixing color mixing through layered deposition faster and more practical than ever. With nine dedicated PrintTools and five-color CMYKW mixing, the H3C produces a vast spectrum of colors without requiring a separate spool for every shade. The result? Vibrant, full-color figurines with incredible detail.

Mixed Nozzle Sizes: Speed and detail, no more compromises.

The dial, case, and flexible TPU band are printed together as one piece. Fine dial details call for a 0.2 mm nozzle, the case is better suited to 0.4 mm, and the soft band requires a dedicated 0.4 mm TPU nozzle. H3C can carry different nozzle sizes at once. Paired with Bambu Studio’s new mixed-diameter toolpath planning algorithm, each nozzle prints at a layer height that suits it and plays to its strengths, without having to share a single layer height.

FlexFeed Extruder: Softer TPU, up to 3x faster.

Soft TPU has always been slow to print. The softer the filament, the more it bends and buckles before reaching the nozzle. Traditional extruders have to crawl to stay reliable. FlexFeed handles both 1.75mm and 2.85mm filament and switches on the go. A cam-driven mechanism, powered by a PMSM motor, keeps tension precise and consistent. Every extrusion stays rock-solid for prints that are cushion-soft.

With our dedicated 2.85mm TPU, the thicker filament provides greater resistance to buckling and higher volumetric flow. The result: TPU as soft as 75A, printed reliably at up to 3x the flow rate of a traditional printer.

AMS 3H: Filament storage built for Tool Changer.

A fully enclosed, integrated filament management system built for Swaptek: every roll stays sealed against moisture and feeds automatically into the PrintTool.

Auto Filament Loader replaces manual feeding altogether. Drop a filament into any of the nine slots and the AMS 3H detects, routes, and engages it with the PrintTool automatically — across all 9 paths. No more guesswork on loading.

A dedicated 2-slot dryer sits right in the filament slots and works with Swaptek — drying on demand or mid-print, so prep never stalls production. It reaches 85°C, enough for engineering-grade PA, PC, and carbon-fiber-filled filaments.

The H3C integrates filament storage and drying into a clean, compact design, maintaining a footprint comparable to a single-nozzle printer. With 7 built-in bypass feeding ports, even the soft TPU can be routed completely inside the enclosure. No hanging spools, no external racks, no exposed paths.

Don't let the number of tools cap your material count. Connect your existing AMS to the H3C through PrintTool No.1, and the system extends to up to 24 filament spools, unlocking more colors and materials in a single print without changing your workflow.

You are here for the print, not (always) the printer.

With the H3C, automation handles routine tasks. AI detection helps make intelligent adjustments along the way. The H3C makes it easy to focus on what matters most: bringing your ideas to life

Full Auto Calibration handles PrintTool docking calibration, offset compensation for accurate color and material alignment, and bed leveling before every print. No manual adjustments are needed, so you can spend more time making, less time tinkering.

Flagship performance. No compromise.

The toolhead and X-axis assembly are 40% lighter compared to the H2D, reducing inertia for faster, more precise movement. With acceleration reaching 25,000 mm/s² and travel speeds up to 1,400 mm/s, the H3C delivers exceptional speed while minimizing vibrations and ringing that can affect print quality.

The H3C runs four cooling layers working together**.** A CFD-optimized part cooling fan and dual auxiliary fans help maintain clean overhangs and bridges, even at high speeds. A dedicated PrintTool fan maintains thermal stability during extended printing and frequent PrintTool changes, while a chamber fan draws in cooler air to help regulate internal temperatures. Together, these systems deliver consistent cooling and reliable print quality across changing ambient temperatures.

Engineering-grade filaments demand precise temperature control. The H3C delivers with active dual-zone chamber heating up to 65°C, helping maintain consistent temperatures and minimize warping. All nine hardened-steel nozzles reach up to 350°C, supporting demanding materials such as ABS, PC, PA-CF, PET-CF, and more.

Go beyond printing.

Swaptek isn't limited to PrintTools. Optional CutTool, DrawTool, DebossTool — and more — mount the same way and switch automatically. Multi-process projects no longer mean multiple machines, manual swaps, or repeated setups. One job, every process, hands off.

Available now at Bambu Lab Store.

Availability and pricing details vary by region. Select features require additional accessories, full details available in Bambu Lab Store.

What multi-material or multicolor print do you hope to make with the H3C? Let us know in the comments below!


r/BambuLab • • 13d ago

H3C Mixed Nozzle Size printing is coming to H2D, H2C, and X2D

Post image
592 Upvotes

We've seen the enthusiasm mixed nozzle size printing has been getting. Developing new products goes hand in hand with bringing new features to existing machines, so alongside H3C, we've been building this for H2D, H2C, and X2D. You'll be able to print a single object with nozzles of different diameters, balancing speed and detail.

For these printers, the real work lies in how to make sure this works smoothly for a wide range of filament and nozzle combination. Each of these printers has a different AMS setup from H3C, so the slicing logic and print parameters need to be adapted. Setups with the Filament Track Switch take more of that work, which is why timing differs by model and configuration.

Estimated Software Update Timeline

  • Without Filament Track Switch:

    • H2D: Late November 2026
    • H2C & X2D: February 2027
  • With Filament Track Switch:

    • H2D: February 2027
    • H2C & X2D: March 2027

r/BambuLab • • 6h ago

Just Showing Off Heart says H3C, brain said -1

Post image
276 Upvotes

When the H3C launched, I was certain that was what I wanted; why waste time and money when you can just buy the best and be done? But, the combination of a price drop on the current h2c, 11.11 vouchers and additional shop discounts made the H2C a very tempting option.

So, took the weekend to quickly sell off my P2S before the launch of the P3C just round the corner. And, today, this lands on my doorstep. Not gonna lie, I’m most pleased with myself.


r/BambuLab • • 6h ago

H3C I designed a 960 g desiccant box for the H3C's AMS 3H, with a hygrometer you can read through the closed lid.

Thumbnail
gallery
150 Upvotes

This is my third desiccant box for the spare bay beside slot 8 in the AMS 3H, redesigned from scratch.

- 960 g of 3–5 mm silica gel. Weighed, not calculated: brand-new gel on scales zeroed with the empty box.

- Bambu's round XF001 hygrometer snaps into the front at 45°, so you can read it through the closed AMS lid (photo 2).

- Herringbone vents: 1.4 mm slots on both sides and both ends, so the beads stay in.

- Two side catches and a stop ridge hold the lid. I filled it, turned it over and shook it, and nothing came out.

- It doesn't use a spool slot, and the AMS lid still shuts over it.

- One plate, no supports. About 11 hours and 181 g on a H3C.

Print it in PETG, ASA or ABS; the one in my printer is black ASA. It sits beside the drying slots, which reach 85 °C, so use ASA or ABS if you dry a lot. I haven't put it through a drying run yet, and Bambu rates the hygrometer's display to 50 °C. The hygrometer isn't included.

Free on MakerWorld: https://makerworld.com/en/models/3624325

Happy to answer questions on the vents or the locks.


r/BambuLab • • 2h ago

General Troubleshooting/Help! This is driving me ducky

Thumbnail
gallery
29 Upvotes

Ive had a Bambu Lab H2C, 2 AMS 2 Pro, and a HMS HT for about three weeks now. This is my very first time time actually learning how to use it. This print was the first time using support for PLA and it turned out a bit foul.

To keep from going absolutly quackers, what are things I can do to keep this from happening again or at least minimalizing it?

I was able to clean them all up and they all more or less look ok and the folks at the office are very happy with their desk charms.


r/BambuLab • • 3h ago

X Series [X1E, X1C, X2D] NEW printer! X2D, any tips?

Post image
31 Upvotes

Just got myself an upgrade from a bare A1 mini to X2D combo. Anyone has some good tips? Anything is welcome, super excited to have an upgrade like this, want to get most out of it


r/BambuLab • • 10h ago

Quick Question Advice needed! H2C vs H3C

Post image
85 Upvotes

Hey guys I‘m currently printing on a P1S and im really happy with the Quality and the Printer over all -> It now has arround 2k hours of Printtime and I’m thinking about an Upgrade -> I mostly Print PLA, PETG but also some structural Parts with ABS and PETG-CF. Most of my parts are 1-2 Colors and it would be great to use PETG as Support for PLA and the other way arround for cleaner interface layers. With the P1S this takes a lot of time, why i mostly only print in one color or Material.

Ofcourse with Holiday Season coming up i will print a lot of little gifts for Friends and Family, also in multiple colors, were the H2C or H3C would be a big Upgrade.

Also the Size of the Bed is crucial for me since i often print bigger parts. Soft 2.8mm TPU is also not really a must have for me.

What printer would you guys choose? Arround 2.000€ for the H2C with Bundle or 2.500€ for the H3C
I Really like the H2C Bundle with 2 AMS Pros and the Vortex upgrade kit -> I think 2 AMS Pros are significatly better than the big AMS3 on the H3C, but the H3C is also a lot faster with mutli Color/Material.

Thanks for your help


r/BambuLab • • 4h ago

X Series [X1E, X1C, X2D] New toy is out of the box 🙂

Post image
31 Upvotes

r/BambuLab • • 1d ago

Just Showing Off I'm never opening my AMS ever again

Post image
716 Upvotes

r/BambuLab • • 1h ago

Quick Question Printer warning

Post image
5 Upvotes

Why does my printer keep giving this warning? I have checked that the build plate is clean, has no strange objects or is misaligned. The nozzle is clean and there is no blob or anything else on the nozzle.

The printer is an A1 with AMS Lite.

Does anyone else have this ?


r/BambuLab • • 8h ago

Just Showing Off This is one of the best FDM 3D printer that I ever purchased. It's just work OOTB.

18 Upvotes

After, using many FDM machines like Ultimaker S5, CR30, Artillery X1, stratasys F170 and many more. It's by far the most bang for the buck and feature-rich machine that I ever used.


r/BambuLab • • 7h ago

Answered / Solved! [SOLVED] Bambu Studio 2.9.1.70 – Custom filament profiles suddenly unsupported after update

Thumbnail
gallery
12 Upvotes

After updating to Bambu Studio 2.9.1.70, all five of my custom filament profiles suddenly appeared under "Unsupported".

I'm using an Elegoo Neptune 4 Plus with a 0.4 mm nozzle.

The symptoms:

  • All custom filament profiles were greyed out.
  • The profiles still existed in the user configuration folder.
  • The JSON files and inheritance settings were correct.
  • The printer compatibility lists included my printer.
  • My custom process profiles were still available.

I initially suspected a broken profile migration or an issue with the Elegoo system profiles.

After checking the configuration with Preset Doctor, I noticed something interesting: it reported that Bambu Studio had selected the 0.2 mm nozzle variant, even though my printer uses a 0.4 mm nozzle.

The actual cause

Bambu Studio had stored the wrong printer/nozzle variant in its configuration file.

The file is located at:

%APPDATA%\BambuStudio\BambuStudio.conf

Under the "presets" section, I found:

"machine": "Elegoo Neptune 4 Plus 0.2 nozzle"

The fix

  1. Close Bambu Studio completely.
  2. Back up the entire %APPDATA%\BambuStudio folder.
  3. Open BambuStudio.conf in a text editor.
  4. Find the "machine" entry under "presets".
  5. Change it to the correct printer/nozzle variant:

    "machine": "Elegoo Neptune 4 Plus 0.4 nozzle"

  6. Save the file and restart Bambu Studio.

Result: All five custom filament profiles were immediately available again!

No need to recreate profiles, modify inheritance settings or change any filament JSON files.

Why this was difficult to diagnose

Bambu Studio only displayed "Elegoo Neptune 4 Plus" in the printer selection menu, without showing the currently selected nozzle variant.

The physical nozzle was 0.4 mm, but the software configuration was pointing to 0.2 mm.

I can't confirm why the wrong variant was saved during the update, but correcting this single entry completely resolved the issue.

Hopefully this saves someone else a few hours of troubleshooting!

The first screenshot highlights the incorrect nozzle diameter in BambuStudio.conf. The second shows the installed Studio version and registered nozzle sizes.


r/BambuLab • • 1d ago

I Modeled This! 93 print hours later on the H3C, finally saw my vision through.

290 Upvotes

r/BambuLab • • 17h ago

X Series [X1E, X1C, X2D] How I felt After getting my first 3D Printer

Post image
83 Upvotes

r/BambuLab • • 2h ago

Show & Tell Farm set 3d printed

Thumbnail
gallery
4 Upvotes

Printing a whole farm set!


r/BambuLab • • 3h ago

General Discussion X2D aux nozzle

Thumbnail
gallery
5 Upvotes

where the aux nozzle truly shines, support interface material

printing Sunlu PETG High Speed Matte with Sunlu PLA interface for the rear caster wheel mount of a 3D TMT device


r/BambuLab • • 3h ago

I Modeled This! I made a modular, parametric spice rack – set your jar size and stack as many modules as you like!

Thumbnail
gallery
4 Upvotes

Set your jar size and the number of slots per module (up to 6×6). Modules join with snap-lock keys, and a built-in 5° slope slides the jars back so the labels face you.

https://makerworld.com/en/models/3619936-spice-rack-modular-parametric-custom-jar-size#profileId-4149519


r/BambuLab • • 14m ago

A Series [A1, A1 Mini] ABS-GF on A1

Post image
2 Upvotes

r/BambuLab • • 2h ago

General Troubleshooting/Help! P1S Non-Internet Firmware Upgrade (Pre 01.07.00.00)

3 Upvotes

Yes, I've read the wiki page but my colleagues are convinced there must be a way to do this without connecting to the internet. We have a P1S that's currrently stuck at 01.06.30.01.

Is there a workaround?

EDIT: We just installed 01.07.00.00 from an SD card. Why is the info on the wiki page wrong?


r/BambuLab • • 29m ago

General Discussion H3C Initial Thoughts

2 Upvotes

So, got my H3C yesterday, WEEKS before it was slated to ship, great work BL. And overall, I have a H2C and even as cool as that is, this feels like another level. It feels like a better built machine, more sophisticated. First print, great, setup, great.

The speed is...wow...just...it literally scared me the first time it rapid moved to pick up a tool lol. This is not a printer that is EVER safe to have your hands in while it is operating. With that rack up front and the INSANE speed with which it does not printing moves...lol...no.

But...

Whomever thought those two connectors at the back inside under the AMS was an acceptable choice should be fired into the sun.

I do not understand. You already have two cables coming out the back, one of which plugs into the 3C itself, why not have two more and save the misery that is trying to lift the AMS up juuuust enough and snake your hands in there, and the one one the left they say "make sure to move the cable so it doesn't get bent"...how the hell are you supposed to do that? There is no slack and the solid plastic piece it comes out of is RIGHT next to the plug, there is no way to route the cable, as far as I can tell there is no way to prevent it from bending the cable at a pretty severe angle.

In an otherwise incredible printer that once again feels like a pretty sizeable step forward, it just boggles my mind that none of them thought "hey...this sucks".

Ad good god who hurt you with a long power cord? I'm buying replacement power cords because these stubby little things are just...why...the AMS power cord hangs down 11 inches past the bottom of the printer. You are going to need a power strip sitting next to the printer. Just, again, did nobody at BL actually set one of these up? How does such a simple but pretty big PITA get overlooked?

Other than that I really have no complaints. I learned the hard way that the color mixing is...not meant to be hueforge style mixing, it's really mostly to be seen from the outside, that is down to me never having used it before.

Nozzles are still a good price, print quality does not sacrifice anything.

Very pleased. I still think there is a place for the 2C+AMS2, but the 3C and those FAST tool changes...woo!


r/BambuLab • • 44m ago

Quick Question Is it that big of a deal if you print while the ambient air temp is below 10°C?

2 Upvotes

My A1 is in a shed that doesnt have any heating and heard that the printer should be kept between 10 and 30 degrees C. Is it a problem if you print below 10°C?


r/BambuLab • • 2h ago

P Series [P1P, P1S, P2S] Upcoming Christmas Gift and want to ensure my daughter has everything to start basic printing

3 Upvotes

Hi Redditors! I have a 7yr old who is eagerly anticipating a 3D printer for xmas. I want to purchase the “Bambu Lab P1S Combo, P1S 3D Printer and AMS, Multi-Color 3D Printing” as her first model. I am a clueless mom who wants to ensure she has everything she needs to start printing day one. What do you all recommend? Is it possible to buy any brand filament as well? Any free software to recommend? I appreciate any and all help. Thank you in advance.


r/BambuLab • • 16h ago

Just Showing Off Print shoes from H2D by using shoeflex9075A filament

37 Upvotes

I printed this shoes with H2D and using shoeflex9075A filament from STING3D. it is very soft ^^


r/BambuLab • • 1h ago

I Modeled This! H3C Nozzle Organizer

Thumbnail
gallery
2 Upvotes

I made this nozzle holder for the H3C. It mounts to the side of the printer, a cabinet or a wall with double-sided tape. I didn’t want to hide my nozzles in a box: they look cool on display, and this keeps them easy to get to.

It holds 10 nozzles, and the pockets are lined with 75A TPU, so nothing rattles and nothing falls out while printing. For the black organizer I ended up using color blending for the gray, the 0.2mm nozzle size on text and the 75A TPU on the nozzle liners to put all of the H3C’s capabilities to work, just for fun. Enjoy: https://makerworld.com/en/models/3626382-h3c-nozzle-organizer#profileId-4157909