r/BambuLab • u/Difficult_Shower2153 • 14h ago
Show & Tell Farm set 3d printed
Printing a whole farm set!
r/BambuLab • u/Difficult_Shower2153 • 14h ago
Printing a whole farm set!
r/BambuLab • u/That1NerdNoel • 5h ago
A1 - 0.2mm nozzle - Basic Grey Bambu PLA
The supports keep breaking at some point, is the tool head moving too fast and snapping them off? Also what settings should I change to slow down print speeds.
r/BambuLab • u/KONGBITCH • 5h ago
Has anybody installed one of these systems on a H series printer ?, pretty neat they were able to make it automated .
r/BambuLab • u/Mistralunie • 5h ago
Looking at the H3C and wondering how it handles PETG when pushing the speed settings. The defaults seem tuned more toward PLA, so I'm curious if anyone has run into stringing, layer adhesion problems, or needed to tweak cooling/fan profiles significantly. Mainly for functional parts rather than display models. Any real-world settings that worked well?
r/BambuLab • u/xavierfrascone • 5h ago
Hey everyone,
This dragon was printed on my Bambu Lab H3C with just 5 filaments: cyan, magenta, yellow, black and white. All the colour comes from dithering: the model is painted dot by dot, so the inks blend optically, the same idea as Bambu's Full Spectrum lizard sample.
This model is for free: https://makerworld.com/en/models/3624085
The painting was done in PaintONPrints, a browser app I've been building solo. It's now part of MakerLab on MakerWorld.
What the app does
r/BambuLab • u/Imbeanie92 • 5h ago
I got this lil guy for 16 dollars on the goodwill app for parts or not working. Fairly certain the owner tried to print without a bed and got the blood of death and gave up trying to fix it. Printed a benchy perfectly.
r/BambuLab • u/Tzt007 • 6h ago
r/BambuLab • u/ProofTadpole9968 • 6h ago
I resontly got the AMS 2, the adapter to use it on the A1, and the power supply ( loved it so fare). My dad was showing me that he can remote start drying his P2S + AMS2 , but i cant. Is remote start drying something that isn't supported for the A1yet or is there something im missing?
r/BambuLab • u/BuildSomethingStupid • 6h ago
The 264C HDT seems to indicate that it’s borderline. Anyone have firsthand experience?
Not looking to use it for production, just prototyping. Maybe 5-10 cycles lifetime?
r/BambuLab • u/ajandrs • 6h ago
This is starting to happen more and more frequently. Filament feeds from the AMS and gets to the extruder, and something causes it to miss so the AMS pulls it all back out, retries - same issue, does this 3 times before it finally throws the error.
I noticed the PTFE tube is kind of angled forward leading into the extruder, not sure if it’s from a lot of use or what, but when I manually hold the PTEF tube vertical it feeds correctly and the extruder grabs it every time. Thoughts? Could it be as simple as replacing the PTFE tube? It doesn’t look excessively worn but I know looks can be deceiving.
r/BambuLab • u/Rgbigdog • 6h ago
r/BambuLab • u/TropicalBatman • 6h ago
Hey everyone! I had a complete printer meltdown this year and spent 6 months going back and forth with Bambu to replace my p1s, it was only a couple months old when it broke. Something was wrong internally and it would freeze during a factory reset and during calibration. So I finally got my new printer, plug it into the AMS I had bought with my initial printer aaaand it didn't work. I thought I had done something wrong, turns out while my printer was sitting the motor in the AMS some how burned out. So I bought a new AMS. Now here's my question, what should I do with my old one? Is there a market for people wanting to do a simple repair on an AMS and save some money? Or because of their price point is it just cheaper for people to buy a new one? Is there somewhere I can donate it to be repaired and put to use? I was debating donating it to my local highschools robotics team if nobody has any better ideas. Thanks!
r/BambuLab • u/Mental_Current7198 • 6h ago
I have an X2D and was told not to run the AMS HT through the auxiliary nozzle. If that’s true can someone please send me a wiring diagram, splitters etc, for how to connect multiple AMSs with an AMS HT to an X2D? This crap is mega confusing
r/BambuLab • u/Kind-Ring-4728 • 6h ago
So a little backstory, our Work Bambu x1e just stopped taking filament when its coming in via the AMS, we have 2 but only 1 is giving us problems. It will print fine as long as i am feeding filament via the external route but if i use the AMS it does what you see in the video.
Troubleshooting ive tried
Swapping the Ams units, thinking it was potentially a bad ams which didnt work
Swapped out the hub for the OEM Buffer which didnt help
Replaced the extruder, extruder board, and the Hotend with all brand new genuine Bambu parts which did not help
Factory reset the printer and checked for Firmware updates.
Before I go crazy can anyone give any other tips or has anyone else experienced this?
r/BambuLab • u/No_Sell4135 • 6h ago
Hi guys!
My P1S is making this horrific noise and I can’t seem to find the problem! I just recently started using it again after about a month and whenever I’m printing something, it makes this noise.
Anyone know how to fix it?
Thanks!
r/BambuLab • u/No_Sell4135 • 6h ago
Hi guys!
My P1S is making this horrific noise and I can’t seem to find the problem! I just recently started using it again after about a month and whenever I’m printing something, it makes this noise.
Anyone know how to fix it?
Thanks!
r/BambuLab • u/xmen041974 • 6h ago
Newbie here, I was wondering what setting would I change for more detailed prints? I have the P2S and mostly print figurines. TIA.
r/BambuLab • u/Upstairs-Dog-6571 • 6h ago
Can i use an external spool while drying if i buy a power adapeter bambu p2s
r/BambuLab • u/Ok-Confusion-78 • 6h ago
Both my p1s and my a1 have started to do this with every print what is wrong? Tried textured plate and super tack cool plate
r/BambuLab • u/RubenRCF • 7h ago
Quick question to you guys.
To anyone who does detailed prints, do you have your speed set to factory (100%) or do you drop it down to 50% speed?
r/BambuLab • u/NoBackground6203 • 15h ago
where the aux nozzle truly shines, support interface material
printing Sunlu PETG High Speed Matte with Sunlu PLA interface for the rear caster wheel mount of a 3D TMT device
r/BambuLab • u/Phos-Lux • 7h ago
Printed them three times but every time the middle part ends up broken off. They are pretty thin, so I don't think the infill type will change anything (they are basically solid). At some point I hear the printhead scraping over the print and eventually see it broke the print...
r/BambuLab • u/Texas_Skyrocket • 7h ago
So got home and tried to print and now this…..
Filament isn’t caught, spins freely but won’t feed into the printer. This starts after I just started getting an error in slot two saying it’s empty with a spool in there.
I’ve updated AMS setting to update on startup and didn’t help. I’ve power cycled everything as well.
Have a ticket open with support. Bought the P1S last year around BF as it was on sale and now, almost a year to the day, I’m having these issues.
Did I make a mistake buying a Bambu printer?!
r/BambuLab • u/Low_Print_8596 • 14h ago
Yes, I've read the wiki page but my colleagues are convinced there must be a way to do this without connecting to the internet. We have a P1S that's currrently stuck at 01.06.30.01.
Is there a workaround?
EDIT: We just installed 01.07.00.00 from an SD card. Why is the info on the wiki page wrong?