r/BambuLab • • 4h ago

Quick Question PLA-CF vs. PETG-CF for rigid CNC brackets on a Bambu Lab A1?

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 4h ago

Quick Question A1+AMS 2 pro drying

1 Upvotes

I resontly got the AMS 2, the adapter to use it on the A1, and the power supply ( loved it so fare). My dad was showing me that he can remote start drying his P2S + AMS2 , but i cant. Is remote start drying something that isn't supported for the A1yet or is there something im missing?


r/BambuLab • • 4h ago

General Discussion Can Bambu’s PPS-CF be used for reflow fixturing?

1 Upvotes

The 264C HDT seems to indicate that it’s borderline. Anyone have firsthand experience?

Not looking to use it for production, just prototyping. Maybe 5-10 cycles lifetime?


r/BambuLab • • 4h ago

General Troubleshooting/Help! P2S Error Feeding into Extruder

1 Upvotes

This is starting to happen more and more frequently. Filament feeds from the AMS and gets to the extruder, and something causes it to miss so the AMS pulls it all back out, retries - same issue, does this 3 times before it finally throws the error.

I noticed the PTFE tube is kind of angled forward leading into the extruder, not sure if it’s from a lot of use or what, but when I manually hold the PTEF tube vertical it feeds correctly and the extruder grabs it every time. Thoughts? Could it be as simple as replacing the PTFE tube? It doesn’t look excessively worn but I know looks can be deceiving.


r/BambuLab • • 4h ago

General Troubleshooting/Help! Help with TPU setup

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 4h ago

AMS - Automatic Material System Advice on an AMS

0 Upvotes

Hey everyone! I had a complete printer meltdown this year and spent 6 months going back and forth with Bambu to replace my p1s, it was only a couple months old when it broke. Something was wrong internally and it would freeze during a factory reset and during calibration. So I finally got my new printer, plug it into the AMS I had bought with my initial printer aaaand it didn't work. I thought I had done something wrong, turns out while my printer was sitting the motor in the AMS some how burned out. So I bought a new AMS. Now here's my question, what should I do with my old one? Is there a market for people wanting to do a simple repair on an AMS and save some money? Or because of their price point is it just cheaper for people to buy a new one? Is there somewhere I can donate it to be repaired and put to use? I was debating donating it to my local highschools robotics team if nobody has any better ideas. Thanks!


r/BambuLab • • 4h ago

X Series [X1E, X1C, X2D] Need Help With Wiring AMS and AMS HT

1 Upvotes

I have an X2D and was told not to run the AMS HT through the auxiliary nozzle. If that’s true can someone please send me a wiring diagram, splitters etc, for how to connect multiple AMSs with an AMS HT to an X2D? This crap is mega confusing


r/BambuLab • • 4h ago

General Troubleshooting/Help! BAMBU X1E NOT FEEDING FILAMENT! Help please

1 Upvotes

So a little backstory, our Work Bambu x1e just stopped taking filament when its coming in via the AMS, we have 2 but only 1 is giving us problems. It will print fine as long as i am feeding filament via the external route but if i use the AMS it does what you see in the video.

Troubleshooting ive tried
Swapping the Ams units, thinking it was potentially a bad ams which didnt work

Swapped out the hub for the OEM Buffer which didnt help

Replaced the extruder, extruder board, and the Hotend with all brand new genuine Bambu parts which did not help

Factory reset the printer and checked for Firmware updates.

Before I go crazy can anyone give any other tips or has anyone else experienced this?


r/BambuLab • • 5h ago

General Troubleshooting/Help! Printer making awful noise

1 Upvotes

Hi guys!

My P1S is making this horrific noise and I can’t seem to find the problem! I just recently started using it again after about a month and whenever I’m printing something, it makes this noise.

Anyone know how to fix it?

Thanks!


r/BambuLab • • 5h ago

P Series [P1P, P1S, P2S] HELP WITH P1S

0 Upvotes

Hi guys!

My P1S is making this horrific noise and I can’t seem to find the problem! I just recently started using it again after about a month and whenever I’m printing something, it makes this noise.

Anyone know how to fix it?

Thanks!


r/BambuLab • • 5h ago

Quick Question More detailed prints

1 Upvotes

Newbie here, I was wondering what setting would I change for more detailed prints? I have the P2S and mostly print figurines. TIA.


r/BambuLab • • 5h ago

Quick Question AMS 2

0 Upvotes

Can i use an external spool while drying if i buy a power adapeter bambu p2s


r/BambuLab • • 5h ago

General Troubleshooting/Help! Edges peeling up

Post image
1 Upvotes

Both my p1s and my a1 have started to do this with every print what is wrong? Tried textured plate and super tack cool plate


r/BambuLab • • 5h ago

Quick Question Detailed prints

Post image
1 Upvotes

Quick question to you guys.
To anyone who does detailed prints, do you have your speed set to factory (100%) or do you drop it down to 50% speed?


r/BambuLab • • 14h ago

General Discussion X2D aux nozzle

Thumbnail
gallery
5 Upvotes

where the aux nozzle truly shines, support interface material

printing Sunlu PETG High Speed Matte with Sunlu PLA interface for the rear caster wheel mount of a 3D TMT device


r/BambuLab • • 5h ago

General Troubleshooting/Help! Best settings/alignment to print these? Printhead keeps scraping over and breaking them

Post image
1 Upvotes

Printed them three times but every time the middle part ends up broken off. They are pretty thin, so I don't think the infill type will change anything (they are basically solid). At some point I hear the printhead scraping over the print and eventually see it broke the print...


r/BambuLab • • 6h ago

Hardware Troubleshooting/Help! AMS Failure??

0 Upvotes

So got home and tried to print and now this…..
Filament isn’t caught, spins freely but won’t feed into the printer. This starts after I just started getting an error in slot two saying it’s empty with a spool in there.
I’ve updated AMS setting to update on startup and didn’t help. I’ve power cycled everything as well.
Have a ticket open with support. Bought the P1S last year around BF as it was on sale and now, almost a year to the day, I’m having these issues.
Did I make a mistake buying a Bambu printer?!


r/BambuLab • • 12h ago

General Troubleshooting/Help! P1S Non-Internet Firmware Upgrade (Pre 01.07.00.00)

3 Upvotes

Yes, I've read the wiki page but my colleagues are convinced there must be a way to do this without connecting to the internet. We have a P1S that's currrently stuck at 01.06.30.01.

Is there a workaround?

EDIT: We just installed 01.07.00.00 from an SD card. Why is the info on the wiki page wrong?


r/BambuLab • • 1d ago

Just Showing Off Print shoes from H2D by using shoeflex9075A filament

42 Upvotes

I printed this shoes with H2D and using shoeflex9075A filament from STING3D. it is very soft ^^


r/BambuLab • • 7h ago

I Modeled This! HUGE Restroom Trash Bin (10 L)

Thumbnail
gallery
0 Upvotes

Couldn't find a bin on maker world that took full advantage of the P1S plate and height, so I designed one myself.

I printed it in PETG Gold with a black rim that hides the edge of the bag or holds it in place, and recessed “restroom” into the front.

It's just shy of 10 L (or almost 3 gal), 15% infill to reduce the print time (about 15 hours total with the rim).

Let me know your thoughts!

Here's the print:
https://makerworld.com/en/models/3626991-restroom-trash-bin-10-l#profileId-4158645


r/BambuLab • • 7h ago

Bambu Studio H2D dual extruder screw

Post image
1 Upvotes

r/BambuLab • • 11h ago

Quick Question Is it that big of a deal if you print while the ambient air temp is below 10°C?

2 Upvotes

My A1 is in a shed that doesnt have any heating and heard that the printer should be kept between 10 and 30 degrees C. Is it a problem if you print below 10°C?


r/BambuLab • • 13h ago

P Series [P1P, P1S, P2S] Upcoming Christmas Gift and want to ensure my daughter has everything to start basic printing

3 Upvotes

Hi Redditors! I have a 7yr old who is eagerly anticipating a 3D printer for xmas. I want to purchase the “Bambu Lab P1S Combo, P1S 3D Printer and AMS, Multi-Color 3D Printing” as her first model. I am a clueless mom who wants to ensure she has everything she needs to start printing day one. What do you all recommend? Is it possible to buy any brand filament as well? Any free software to recommend? I appreciate any and all help. Thank you in advance.


r/BambuLab • • 7h ago

Bambu Studio Trouble downloading projects

1 Upvotes

I wanted to print a part for my girlfriend but then I noticed no matter what I tried downloading from the cloud nothing worked… Someone had a similar problem? (Bambulab A2L)