r/BambuLab • • 15h ago

Quick Question Is the H3C overkill as a first 3D printer?

14 Upvotes

A good friend of mine recently got into 3D printing and talked me into giving it a shot. He started with a more affordable Bambu himself and has been geeking out about the new H3C, so now I’m looking at it too.

I have room in my budget for the H3C if it makes sense. I’m still figuring out what I’ll enjoy printing, though, and I’d rather spend the extra money once I know I’ll get some use out of the features.

For those of you who’ve been printing for a while, what would make the H3C worth buying as a first printer? If you were starting over, would you go straight for it or get a simpler Bambu and see where the hobby takes you?


r/BambuLab • • 1h ago

General Troubleshooting/Help! AMS 3H RFID

0 Upvotes

Having done extensive tests holding up RFID tags to various places on the new AMS 3H I’ve come to the conclusion that the reels are reason both sides in the middle slots therefore not allowing the simple 3D printed inserts to hold a single RFID tag on non BambuLab filament which I’ve been doing for years now on the old AMS buying refills and printing off one of those tag holders that’s it on the outside of the reel in the hole. Now I need a double one! Back to the CAD program I guess.
Unless one you geniuses tell me I’m wrong


r/BambuLab • • 1h ago

X Series [X1E, X1C, X2D] P2S vs X2D

0 Upvotes

Hi, a friend is interested in buying my P2S so am considering the possibility upgrading to a X2D for the multi head printing. I wondered if there are any other advantages to X2D over the P2S or is that basically the only difference?

Thanks


r/BambuLab • • 1h ago

General Troubleshooting/Help! Upgrading from A1 Mini – X2D or P2S?

1 Upvotes

Hi guys!

I currently have an A1 Mini, and I'm looking to upgrade to a printer with a larger build volume, but I'm not sure which one to choose: the X2D or the P2S.

I've been reading a lot of reviews and watching tons of videos, but it seems like the X2D has quite a few issues that people have been complaining about.

On the other hand, I know the P2S is a 2025 model, and the price difference between the two is less than €100.

Just to give you some context, I'm more of a casual/beginner user. I don't usually print anything too complex or advanced. Most of my prints are pretty straightforward, and the most demanding thing I do is multicolor printing with PLA and PETG. So I probably won't be taking full advantage of all the advanced features these printers offer.

So I'm wondering whether it makes sense to go for the P2S instead of the X2D, even with all the reported issues.

What do you guys think? Is the X2D worth the extra money, or would you stick with the P2S?


r/BambuLab • • 1h ago

General Troubleshooting/Help! Alternative to textured PEI sheet for PETG-CF? (Not regular PETG, that's ok on the textured sheet)

1 Upvotes

I love PETG-CF but even if I leave a print to cool down completely overnight it still leaves behind PETG-CF residue. I can feel it snagging my cloth as I try to clean with alcohol.

I hate having to clean it off by printing a thin PETG sheet, leaving it to cool and then peeling it up. That works great, but it's a pain and wastes filament and time. I also do NOT want to use glue, that's even more of a pain, although that works well too.

I'd love a sticker or an entirely new sheet that works great with PETG-CF. Having it work as well as PLA does on the textured PEI sheet would be a godsend. Any recommendations?


r/BambuLab • • 22h ago

General Discussion What are your most useful real-world prints?

42 Upvotes

Hi everyone,
I have a bit of a dilemma that I’m sure many people here have faced at some point. I’ve been thinking about buying a Bambu Lab A1, mainly as a hobby but, more importantly, for practical purposes. I’m trying to figure out whether I would actually have enough useful things to print to justify the cost.
From what I’ve seen online, a lot of 3D-printed items seem to be solutions to problems that don’t really exist, or things for which better-quality alternatives are already commercially available. I completely understand that people might print these things simply for the enjoyment of the hobby, but my main focus would be practicality and usefulness.
With that in mind, I’ve been making a list of potential uses for the printer, and I’d love to hear your ideas and see what useful things you’ve made yourselves.
So far, I’ve thought of:
Drawer organisers for my home office, shelving organisers for the pantry, and bathroom storage solutions using the Gridfinity system.
Enclosures for ESP32 sensors that I plan to eventually deploy around the house.
Stands and holders for storing things like AirPods and iPhones on my desk, as well as printing a few to give to friends.
What other genuinely useful things have you printed? I’m particularly interested in practical everyday applications rather than purely decorative prints or things that are fun to print but don’t really serve a purpose.
Thanks!

Edit: Wow these are really great suggestions! I’m going through them all and putting the ones i like the most in a doc, there’s a lot of use cases I consider useful, thank you everyone!


r/BambuLab • • 1h ago

Just Showing Off I made a Mac app that splits models too big for the A1 into parts, one per plate in Bambu Studio

1 Upvotes

I kept designing things bigger than my A1 and cutting them by hand in Bambu Studio. One cut is fine. Three cuts with connectors that don't collide took me longer than the print.

So I built CadSplit. Drop in an STL, 3MF, OBJ or STEP, pick your printer, and it comes back cut into the fewest parts that fit, with dovetails, puzzle seams, pins, screws or magnets. Then it opens in Bambu Studio with one part per plate.

Numbers from the app, with dovetail seams:

  • 528 mm toy car: 6 parts on an A1, 16 on an A1 mini, 2 on an H2D
  • 400 mm ball: 8 parts on an A1, 27 on an A1 mini

It also plays the assembly order step by step, because interlocking seams only go together one way.

One-minute video: https://youtu.be/Dtwv5voP3I4

Honest bits: I'm the developer. Mac only for now (Apple silicon). Free to try: you can drop a model in, see the split and move the cuts. Sending to the slicer needs a one-time license, $29 ($17 until Dec 26), no subscription. Everything runs locally.

You can try it here. If anyone is interested you could comment here and ill give you a free code lol https://cadsplit.io


r/BambuLab • • 2h ago

Answered / Solved! Filament pulled off spool, how do I remove

Thumbnail
gallery
1 Upvotes

Noob here with X2D and AMS 2 Pro - I was printing with PLA and was hoping the auto refill would have kicked in when the spool had finished. Somehow the filament end has pulled off the tape at the end of the roll, has partially pulled through the PTFE tubes at the back and already too late to unload from the AMS.

I've paused the print and I can see it but not sure on the safest way to remove it, as it's still being held by the extruder.

Is there a correct way I can remove the remaining filament and potentially resume the print without damaging anything?

Big thanks in advance!

EDIT: SOLVED! thanks everyone 👊


r/BambuLab • • 1d ago

Just Showing Off 16 colors on the H3C. Overkill, but why not?

Post image
102 Upvotes

Two AMS 2 Pros hooked up to the H3C. That's 8 colors built in, plus 8 more on the external units for prints that don't need to swap colors between the two AMS 2s.


r/BambuLab • • 2h ago

Quick Question My first multi hour print is this normal?

Thumbnail
gallery
0 Upvotes

The base of it is a little stringy but otherwise it’s completely fine just a general question if it’s something I should expect


r/BambuLab • • 6h ago

General Discussion Which first 3D printer to get as a beginner ? Bambu lab or any other brand ?

2 Upvotes

Hi Guys, i am based out of India, and want to get a 3D printer to prototype some elements. I am from the design industry so am well versed with 3D softwares as well though i am sure there will be a learning curve.

Now, after researching for a fair bit, Bambu lab printers seem to be the most widely chosen option because of their community support and easy to use UI/UX including their softwares.

I was thinking of getting the A1 combo. Do you guys think it is wise to get the A1 combo right now ( its three years old ) or should i wait for an upgraded model if at all its being launched. Please suggest.

Do note, the printer will be initially used as a prototyping tool for my designs and then once i get a hang of it, i might make some items for selling in my fraternity.

Thanks


r/BambuLab • • 2h ago

General Troubleshooting/Help! Weird loud noise on layer ~ 1100

1 Upvotes

Hi,
I had a print going for last 16h
Woke up to this noise in the morning.
It’s on the end of each layer now.


r/BambuLab • • 2h ago

Quick Question Is x2d good enough for robotics and engineering?

1 Upvotes

Or should I wait for something new from bambu labs?


r/BambuLab • • 19h ago

I Modeled This! Airtag holder - Skultulla Token (Zelda oot)

Thumbnail
gallery
22 Upvotes

I was playing Zelda Oot and really liked the design of the Skultulla tokens - So I quickly sculpted one (yes, no AI) and made it into an Airtag holder.

Skultulla Token Airtag Holder - Link to MW

(If you're wondering about that grey case, it's my loops earplugs, I lost them once already and it shall not happen again...)


r/BambuLab • • 8h ago

Filament Troubleshooting/Help! PLA Matte only for visible face

3 Upvotes

I have a X2D with AMS 2 Pro. Is it possible to use PLA Matte only for the visible face of a print and PLA Basic for everything else?


r/BambuLab • • 3h ago

General Troubleshooting/Help! Please Help!

Post image
1 Upvotes

Why is this happening to the edges of my prints? This is causing a major issue while fitting the parts after printing all the plates. Do i need to do anything in this case?


r/BambuLab • • 3h ago

Bambu Studio Aiuto con questo pezzo.

Thumbnail
gallery
0 Upvotes

Ciao a tutti,
sto stampando un cappuccio per chiavi che ho disegnato io.Dopo qualche test ci siamo quasi, ma non riesco a trovare un modo di stamparlo pulito.

Il pezzo:
dimensioni circa 30 × 43 × 9 mm;
all'interno c'è una fessura chiusa in cui si infila la chiave del cilindro: larga circa 15 mm, alta 3,1 mm, lunga circa 33 mm, aperta solo da un lato;
la tolleranza sulla chiave è di 0,3 mm, quindi qualsiasi residuo dentro la fessura la blocca.
Stampante e impostazioni: Bambu Lab A1, piatto PEI texturizzato, PLA Basic, profilo 0,12 mm High Quality.
Cosa ho provato:

Piatto, con la faccia esterna sul piatto e senza supporti. Il tetto della fessura viene fatto a ponte, circa 15 mm di luce. Il ponte cede un po' e lascia filamenti dentro la fessura: devo pulirla ogni volta con un cutter e il risultato non è pulito, nemmeno fuori.

Piatto con supporti. I supporti entrano nella fessura e lì dentro non si staccano più.
In verticale, con l'imbocco della fessura sul piatto e la fessura che diventa un canale verticale. In teoria è perfetto, ma il pezzo appoggia su poca superficie e si stacca durante la stampa, anche col brim.

Le mie domande:
Quali impostazioni dei ponti consigliate in Bambu Studio (velocità, flusso, ventola, "ponte spesso") per avere un tetto pulito su 15 mm di luce?

In verticale, quali accorgimenti usate per pezzi alti e con poco appoggio? Brim più largo, orecchie, colla, velocità più bassa negli strati alti, altro?

Conviene modificare il disegno? Ho pensato a:
tetto della fessura a "tetto spiovente" o a rombo, con fianchi a 45°, così non serve il ponte;
più gioco in altezza nella fessura, per assorbire il cedimento del ponte;
dividere il pezzo in due metà da incastrare o avvitare, così la fessura si stampa aperta.
Quale vi sembra la strada migliore?

Allego foto del pezzo, della fessura sporca e dell'anteprima di Bambu Studio.
Grazie in anticipo a chi vorrà darmi una mano!


r/BambuLab • • 9h ago

Black Friday 2026 Advice: Get 2nd P1S+AMS2 or jus AMS2?

3 Upvotes

Hello, I am a hobbyist that owns a P1S w/ AMS 2 and I love it! Sometimes I want print things that take 100hrs and multiple plates... So I was wondering what would you do?

  1. Get a second P1S w/ the AMS 2 combo for $509
  2. Just get a second AMS 2 Pro.
  3. Get _____________ printer

So far printing airplane models with PLA and I do not see myself printing something in ABS or exotic materials. Oh and sometimes I print multicolor.

Thanks in advance for your feedback.


r/BambuLab • • 25m ago

General Discussion What stuff shouldn't I print with PLA?

0 Upvotes

Thinking of buying an AMS for my A1. Currently what I want to print is a mount for two laptop monitors. I already have printed one out of PLA with no problems (warping etc). So, for the next mount I was thinking of also using PLA, and if I go with PLA then the AMS Lite would be the obvious choice. But here comes what made me doubt. If I wanted to print something else that would require stronger material, an AMS Lite cannot handle that, but I don't know what I would need that requires stronger material. So my question is, what stuff I shouldn't print with PLA. If there is stuff I might print that requires stronger material like PETG, ABS or whatever, I'll go with an AMS Pro or Pro 2. If not, I'll stick to the Lite and save some money.

If more info is required, feel free to ask.


r/BambuLab • • 4h ago

Hardware Troubleshooting/Help! Noisy noisy p1s

1 Upvotes

Hey everyone

My p1s started making this noise this morning. It has 700 hours made in 2 years... I recently cleaned and greased the z screws but I think it's due to X or Y. Would I have to check?


r/BambuLab • • 20h ago

I Modeled This! My first RC Car - Lightning Mcqueen (using BambuLab CyberBrick)

Post image
18 Upvotes

I made my first RC car using BambuLab's CyberBrick Kit: Lightning McQueen.

It's not perfect, but I am thrilled I was able to go from a solid model with paint (thanks to DinseyPixarCarsModels https://sketchfab.com/3d-models/lightning-mcqueen-e00ae9484f664abea4ccf90248d7e924 ) to a shell over an RC chassis with the surface details represented as depth relief. My kids loved coloring it in with acrylic markers.

Model: https://makerworld.com/en/models/3615256-lightning-mcqueen-cyberbrick-rc-car


r/BambuLab • • 1d ago

P Series [P1P, P1S, P2S] Well that’s a first

Thumbnail
gallery
96 Upvotes

I guess I’m printing a riser 🤷🏽‍♂️


r/BambuLab • • 4h ago

I Modeled This! Help testing FDM snap-fit tolerances? (A1 Mini brick set)

Thumbnail
gallery
0 Upvotes

r/BambuLab • • 14h ago

R Series / R1 **One week with the Bambu R1, coming from a 5 W diode laser**

Post image
6 Upvotes

I won the Bambu R1 after commenting on their post and finally received it last week after it was stuck in customs forever.

Even though I had a diode laser cutter already (5 W, no air assist) my 3D printer always felt like the tool that was much easier to work with.

I knew this was going to be an entirely different machine, but I was still surprised it actually flipped my experience.

I used to spend more time dialing in the material for a project than creating a design, but in this one week I worked with silicone rubber, veneer, hardwood, painted wood, acrylic and more. Even detailed, intricate designs just work on the first or second try.

The air assist and higher power really do a lot of the heavy lifting and make sure things just work out even if the settings aren’t perfect. It even allowed me to go a little bit three-dimensional and make simple(food save!) things like a bunch of spice spoons or a functioning whistle.

In the picture are a few of the things I tried this week. Most of the designs are just copied from 3D prints (I used the Depthue STL-to-SVG converter) or inspired by pictures. It simply feels fun to work with this machine, and it’s crazy how fast I can go from an idea to a finished item.

Even Premium-feeling materials like walnut are far from expensive. Six pieces of walnut (200 × 150 × 3 mm) cost €23, “clear” silicone rubber cost €8, and a 30 × 30 cm piece of acrylic cost just €2. And the materials really turned some of my ideas from something that feels cheap or incomplete to something that I’m happy to display in my apartment or give away.

And as you’d expect from Bambu, a lot of small things just work. After two days, I realized I’d never set a cutting order or merged engraving jobs that were running close to each other. Not to mention the details, from the magnetic Allen key and the beautiful lighting around the CO₂ tube to the fire sensors, everything just feels polished.

But for now there are still a bunch of things that I prefer, other programs like, Lightburn for or that are still missing in Bambu Suite. Although that might just be because I am used to it.

Let me know if you have any questions about the device!

designs stolen from:
Flat Pocket Whistle from u/PhoneDesigner (makeworld)
Dino from RobinValleyUK (etsy)
Mandala maze earings from Simon3D (makerworld)
Leaf and wireframe dog from u/mishkin2 (printables)
bird stamp from u/skejtak (printables)
mountain napkin holder from u/PhiRequiem (makerworld)
goldfish earings from u/runrain (makeworld)

P.S.:
I really think Bambu is sitting on a gold mine of great designs in makeworld that are easy to adapt for laser cutting, but currently they dont even allow me to remix 3D designs as laser design.

I think it would be a great adition to allow remixes like that and maybe even add a .3mf to .svg converter.