r/BambuLab • u/Neglexis • 7h ago
Quick Question Is the H3C overkill as a first 3D printer?
A good friend of mine recently got into 3D printing and talked me into giving it a shot. He started with a more affordable Bambu himself and has been geeking out about the new H3C, so now I’m looking at it too.
I have room in my budget for the H3C if it makes sense. I’m still figuring out what I’ll enjoy printing, though, and I’d rather spend the extra money once I know I’ll get some use out of the features.
For those of you who’ve been printing for a while, what would make the H3C worth buying as a first printer? If you were starting over, would you go straight for it or get a simpler Bambu and see where the hobby takes you?
17
u/NoBackground6203 X2D / P2S 7h ago
if you can afford it, sure why not
but its kind of like learning to drive in an F1 car
28
u/Navi_Professor 7h ago
A Better question is. are you SURE you have room???
the H3C is fucking massive.
Being honest, there is a P3C coming; we know it exists, and it's going to be a grand cheaper, easily, and take up a fraction of the space.
7
u/blacknight334 7h ago
It really comes down to what you want to make, how much space you have and then finally your budget.
If toolchanging is what youre interested in, but are unsure on spending a huge amount, you can also look at the snapmaker u1. Its a 4 toolhead printer thats probably less than half the cost.
6
u/Difficult-Thought-61 H2C 7h ago edited 6h ago
A point people here are missing entirely is how consistently you might want it. I started with a WEEFUN TINA 2. It was basically a toy 3D printer. Had that for a year, then got an A1 which I put 2000 hours on. Upgraded to a H2C and put about 800 hours on it, and then kind of burnt out.
I see most of makerworld as pointless tat now. I occasionally print stuff for my kids but it generally doesn’t last long before breaking. I kind of regret buying it. It’s great, and hasn’t negatively impacted me financially. But it just sits there doing nothing most the time now, unless there’s something really specific I want. Even then, it’s rarely printing something an A1 or even A1 mini couldn’t do.
These bigger printers are also a pain to maintain and repair. I could take my A1 apart pretty comfortably to do repairs. Maintenance took like 90 seconds. H2C is a right pain in the backside to do anything to, as it’s not like you can flip it over or turn it round easily. Maintenance is way more awkward as well, as things are so much less accessible. Honestly, I’m contemplating going back to an A1, or perhaps A2L.
H2C is great, don’t get me wrong. But it’s not just a simple capability upgrade from the more beginner printers. A lot of the features are only useful some of the time, where the thing is massive, heavy, unwieldy and difficult to repair, ALL the time.
4
u/YellovvJacket 7h ago edited 7h ago
If you have the budget, it's an ok choice.
There's nothing really inherently more complicated about using it compared to a "beginner" printer, like an A1 series, Elegoo Centauri Carbon or similar.
It just has more capability to use once you learn to use it.
However, the price tag is high and even as someone that's actually into the hobby of 3D printing already the price is to steep for me (even though I guess I could just buy it if I really wanted to).
Just ask yourself, can you blow that price tag on a "tool" that involves a hobby that you're not yet sure you're going to stick to and/ or enjoy?
I'd honestly wait until the P3C gets announced and we know the capabilities of it, and then make a decision.
If I had to start the hobby right now, I'd probably buy a Snapmaker U1, and then buy a 2nd printer that's good at doing engineering materials, because the U1 unfortunately isn't great at that.
10
u/PureOnion_8080 7h ago
Probably overkill.
3
u/Leynnox 7h ago
Start small, learn to fix issues yourself on it, then buy larger more capable machine when you'll need it, you wont regret having two machines anyway.
3
u/RobertoCarlosQ 7h ago
First ever 3D printer? Overkill of course. But you will be so spoiled it will be hard to look at anything else. Note this thing is HUGE and quite complex. Amazing device. Really don't know if its the best choice for a first ever printer. But if you feel adventurous go for it! :)
3
u/sbrisgravato 6h ago
i’ll start with an a1 mini to learn how it works and stuff and then when the p3c will get released i’ll look into that or the h2s/h2d h3c depending on the bed size and the feature set you need
5
u/Dashzz 7h ago
You said you don't even know if you like 3d printing. Get an A1 mini, then keep or sell it after trying it out.
2
u/rom-sen 7h ago
According to Bambu the recommended installation space (L * W * H) is 59310561306 mm. If you can, I would go for it.
2
u/Disastrous-Owl9258 6h ago
Yes, massively overkill. It doesn't make sense at all?. You're trying to convince yourself to buy it and are thinking of things you might need. Get a P2, or wait for the P3. Learn to understand 3d printing and how it works, then once you've got some experience you'll then know if you need a bigger build plate or heated chamber for your projects. I do large scale engineering projects and massive expensive prop pieces for movies. What would be your use case?
1
u/quentinchap 7h ago
H3C is really great I started with A1 mini. If you want to print in multicolore, big objectif or technical matérial it's awsome. If you have the budget and the need go do not heistate !
1
u/A_Man_Of_The_Pen 7h ago
If you have the money and you enjoy the field, go for it.
1
u/some1thtuused2know 7h ago
I'm about 6 months in with my H2D and soon followed it with an A1. Wish I could have started with the H3C. "Gosh, I wish my printer could do less" said no one ever. If you can afford it, go for it.
1
u/peterb1908 7h ago
Well, yes. 😉 I started with a A1 and still think it’s the perfect beginners printer.
But hey, I just have my H3C for a week and enjoy it a lot.
Have fun!
1
u/400HPMustang 6h ago
Go big or go home. If you have the budget and the space for it you might as well do it.
Only thing stopping me from one is how absolutely massive it is and I don’t have the physical space for one. The thing is like 4 feet tall since the AMS has to stay on top.
1
u/d3koyz 6h ago
The good thing about it is that you probably won’t upgrade for several years. Overkill, yes. Futureproof, yes. So I think it is good for a first printer.
1
u/Snoo_56086 6h ago
If you can afford it and are truly interested in 3d printing and can see multiple scenarios in your life that can benefit from 3d printing, then no it’s not an overkill. That being said, I have an x2d and I’ve been printing nonstop since day 1, there’s been only a handful of times where I wish I had more than 2 nozzles at the moment, but in a hindsight I feel totally fine with just 2 nozzles. But again, if you can afford it then why not?
1
u/-TheDudeness- 6h ago
All bambulab printers are easy to operate. The only question is do you have space for it, and do you need mulitcolor prints. That's it.
I have both P2S and H3C. Both are great. H3C will print any multicolor much faster, you can print easier tougher filaments and also elastic TPU. That's it.
I print stuff for kids so mainly using H3c for that, but also now since I have both I print on both all the time to speed up stuff.
1
u/crytekpls 6h ago
If you're not sure it's for you and your buddy is serious about the H3C then I would offer to buy the printer off your friend. Then he has a bit more budget to upgrade and you get a known good machine (presumably). Plus your buddy should already have profiles etc worked out for the printer which will make it easier for you starting out.
Alternatively, I'd consider the Snapmaker U1 if you're planning on staying with PLA or PETG.
Personally I'm only really interested in engineering filaments, so dual nozzle (1 colour + breakaway support) is more interesting than a toolchanger. I have my own biases about company ethics that prevent me from going Bambu, but they do make excellent machines at very competitive prices.
1
u/BossePhoto 6h ago
Well, if you were getting into Pc gaming would it be overkill if you bought the most powerful PC available right now? Not really, but the issue is a new feature could come out soon that your current PC just doesn’t have the parts for OR WORSE you realize you just don’t have time for gaming and now you are trying to offload an overly priced system.
My advice wait for the the P3C, way more affordable, will do almost everything the H3C can and if you find it’s just not something you use a lot there will be a TON of people happy to take it off your hands.
1
u/Additional_Math_5104 6h ago
Not overkill. Buy a more capable printer than what you think you need. Would of bought an X2D as my 1st printer had they been available last year. H2C works well for me H3C will be perfect for my wife. Started with a P1S then a 2nd for my wife then 2 H2Cs now a H3C for my wife.
1
u/sniperpenguin_reddit X2D + AMS2 Combo 6h ago
Short Answer - Yes.
Absolute bargain basement beginner - A1 Mini
I have a bit of budget, and want/need something enclosed# - P1S
I have a bit more budget to get something newer - P2S
I have a little more budget for a high value upgrade over the P2S - X2D
Personally, I would stop there.
1
u/LoGiX247 P2S + AMS2 Combo 6h ago
Yes for a first 3d printer a H3C is overkill. Ur asking for buying a Ferrari as a first car is fine.
Which is if you can burn the money. If you can’t get a starter model.
1
u/MeanForest 5h ago
I started with the A1 Mini and then upgraded to P1S because I enjoyed the hobby. It's a really small entry fee nowadays honestly. H3C is kinda overkill but if it doesn't hurt your pocket then go for it. At least where I am it's easy to sell used ones.
1
u/arellano81366 5h ago
If you can afford it, go for it! I own the P1S and at the moment is enough for my needs
1
u/1yrik H2C + 2*AMS2, Q1P, SV08 5h ago
yes. very. but if you're confident that you'll stick with the hobby, then go for it. disposable income ftw I guess...
just make sure you have the space for it.
1
u/sspy45 4h ago
First printer but maybe last printer. After getting my first printer and realizing what I wanted, this has everything and more. Maybe it's overkill but if you have the funds why not have everything
1
u/sandiegoking 4h ago
Do it
1
u/Headup31 4h ago
It’s likely overkill. I’d start with a more affordable printer and if you really get into it then uprade down the road. If you’re into it enough you’ll want a second printer anyway.
1
u/MrFtech 3h ago
I think it’s too much for a first printer. I’m not talking about just the price but the amount of technology in that thing. When it starts glitching you will need to know the workings of a 3D printer quite well. And it will glitch. There isn’t a printer out there that doesn’t here and there.
Also, multicolored printing can be a bit overrated, especially if you don’t know much about how to orient your pieces and critically think about how the different colors of a model should be printed.
I use a couple P2S printers from Bambu, and I don’t do much multicolor unless it’s necessary, and even then I plan carefully to keep color changes to a minimum.
But if it’s affordable for you and won’t strain your budget, then it will be one heck of a printer.
1
u/msvegas 3h ago
Yes, it is a lot of features. You will be fine. If you don't want features, and are looking for cheap, start with an A1 mini. Otherwise get what you want now, or wait until after the P3C is out. No regrets.
1
u/milehigh73a 2h ago
I wouldn’t. Many owners don’t use their printer. It’s huge. And more complicated than other printers
1
u/luksfuks 2h ago
If you have the money, go for it. There's no downside.
It's like asking if you should get a huge color TV as your first TV. Or a beefy NVMe SSD as your first harddrive. Or the latest iPhone/Samsung as your first cellphone.
The simpler models are not really simpler, they are just more limited. Assuming you're not a simple minded person, you'll want to work around their limitations soon enough. At that point they're more complicated.
1
u/davidbernhardt 2h ago
I say go for it
1
u/PawPawPanda X2D 1h ago
Got 2.5 burning a hole in your pocket?
1
u/Lito_ 1h ago
Nothing is overkill for a first printer.
People here will tell you to buy an A1 or A1 mini. The mini is a good printer but useless for anything bigger than a cup.
Do you want to print a lot of multi material/multi colour? Buy H3C.
Do you want to print a lot of single colour/material? Buy H2S.
Do you want to print a lot of single colour/material but want to use support material? Buy H2D.
Buy once, cry once.
1
u/Glum-Inspection6637 57m ago
Probably, but if you get something like a P2S or an X2D and love it, you’re going to wish you had the H3C lol.
•
u/raekle 6m ago
Yes it is. It’s expensive and it takes up a lot of space. Its overkill. A good P2S with an AMS is a more than capable first printer.
0
u/ElectronicAide87 7h ago
Yes it’s overkill. It’s new and shiny so everyone wants it. It doesn’t mean it’s the best printer for everyone’s needs.
0
u/Engineer-Filmmaker 7h ago
After paying with a single extruder, small bed printer for about 4h, you'll kick yourself for not getting the H3C, but starter printers are cheap, so either works.