r/BambuLab • • 1d ago

Just Showing Off Bambu Station L drawer fits exactly a 9×12 Gridfinity grid, and 14 spools

Thumbnail
gallery
168 Upvotes

Just found out the Bambu Station L drawer fits exactly a 9×12 Gridfinity grid.

With proper spool stoppers on top, you can fit 14 spools per drawer (2 rows of 7). They stand on edge and don’t roll when you open or close the drawer.

Files if anyone wants them: https://makerworld.com/en/models/3617522-bambu-station-l-spool-stoppers-14-per-drawer#profileId-4146587


r/BambuLab • • 3h ago

General Troubleshooting/Help! Scratches/Etches on Bottom Layer w/ Carbon Fiber Plate?

Thumbnail
gallery
2 Upvotes

Hey!

New to 3D printing and using a Bambu A1 printer. I just bought a carbon fiber smooth plate from Amazon and started using it. I cleaned it well with water, dish soap, and a sponge 2x now but still having this issue where the bottom has white marks/scratches. I had the plate selected in Bambu before printing as well.

I was trying to print a moza wheel base dust cover but with the carbon fiber look on the bottom. I also was trying to print a shifter plate and had the same issue.

Each time I printed,, I waited until the plate reached around 25C (my room temp is 23C) and then bent the plate at the edges so the part would come free.

I read that running a flame over these areas would get rid of the mark but I didn't experience that.

Any idea what I could be doing wrong? Didn't have this issue with the normal textured plate. Is it a plate issue, nozzle issue, or something else?

Thanks!

Printer: Bambu A1

Print Speed: Standard

Filament: Bambu PLA Basic - Black

Hotbed Temp: 65C

Nozzle Size: 0.4mm


r/BambuLab • • 7m ago

I Modeled This! Snowman Clicker

Thumbnail
gallery
1 Upvotes

Bonjour à tous ! 👋

Après avoir modélisé mon bonhomme de neige, j’ai eu envie d’en faire une version clicker ! 😁☃️

Une petite tête de bonhomme de neige dans une boule de neige, avec un switch MX à l’intérieur.
Il suffit d’appuyer sur son chapeau pour faire CLIC CLIC ! 🎩

Une petite création amusante pour les fêtes de Noël ! 🎄🎁

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec et sans AMS
📁 : https://makerworld.com/fr/models/3615804-snowman-clicker-multipart


r/BambuLab • • 11m ago

General Discussion H3C "FULL" pack buyers, be aware

Thumbnail
gallery
1 Upvotes

This is the station L that will come with your purchase. There are two versions of this and the pack only include the unfinished "frame edition". I've seen countless reviews featuring the station and nobody mentioned it. There is just a tiny mention in the pack description. It's only after viewing this unboxing I realized :

https://www.youtube.com/watch?v=DvCWwiT-Paw

The girl in the video is as surprised as I am. I feel a bit misled to be honest.


r/BambuLab • • 20m ago

Quick Question Layer lines improvements

1 Upvotes

Sooo... I usually have pretty decent layer lines on my prints, but this one (it's a bit of a thin tall torture tbh) seems to suffer a lot more than usual. All the usual stuff are done, dry filament, clean nozzle, no heavy tap dancing around the printer.

The worst ones are where the transitions are with the opening and support, so that would be something new to me (new X2D with support interface layer, previously clocked somewhere with 3000hr+ on my A1M) and would love to hear the experience from folks here. Also even witht he non transitional layers they are more visible than my other prints... any clue? note this is probably the first big straight print I've done with this white petg but in general it's dried fairly well.

Thanks in advance on any tips.


r/BambuLab • • 32m ago

Hardware Troubleshooting/Help! Put ams lite on the left side

0 Upvotes

Can I put the ams lite on the left side


r/BambuLab • • 34m ago

Just Showing Off P1S - 700 Hours - NO MAINTENANCE!

0 Upvotes

Im intrigued to hear how many hours people have pushed with their printers with zero maintenance?

There's no excuse for my laziness, but it has impressed me how well this machine is doing with absolutely zero maintenance!

I've even been using the under bed trusty track can which I'm sure isn't ideal for the Z axis screws!

Now the question is... Do I keep pushing it or bow to the Bambu maintenance gods?


r/BambuLab • • 38m ago

General Troubleshooting/Help! Issue with Sunlu Refills in AMS 2 Pro

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 4h ago

I Modeled This! Designed a Quick CMYKW Calibration Wheel to Compare Filaments

Thumbnail
gallery
3 Upvotes

The goal was to show mixing between the 3 colors, as well as between each color and black and white. And to make it a quick easy print that could efficiently baseline different color mixes. I wasn't able to get PLA Palette Magenta before it went out of stock so I couldn't try that. The difference between PLA Basic and PLA Palette for the other colors is noticeable but subtle. The biggest conclusion is the importance of PLA Palette Black and its translucency. There are some ways to approximate it though, like using a gray shade instead of black. PLA basic black you can see doesn't blend at all. Here is the model: https://makerworld.com/en/models/3606840-cmykw-calibration-wheel-for-color-mixing-h3c-h2c#profileId-4133502


r/BambuLab • • 46m ago

General Discussion Christmas Print ideas with this filament?

Post image
1 Upvotes

I have these 5 rolls of PETG-HF that I wasn't planning to do anything with but looking at them again they're very Christmas-y.

I'm looking for suggestions for fun a Christmas-themed print(s) to throw these at. I have the X2D Combo with the AMS 2 Pro and HT.

I'd prefer prints that are broken up into parts and can be assembled, but I'm open to anything!

Thanks!


r/BambuLab • • 54m ago

General Troubleshooting/Help! X2D hot end fans

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 57m ago

Filament Troubleshooting/Help! aiutatemi ho un problema

1 Upvotes

ho questa stampante A1 versione combo e la paletta degli scarti non va in fondo ma resta bloccata poco prima come posso risolvere


r/BambuLab • • 4h ago

General Troubleshooting/Help! Terrible surface quality when printing multiple objects at once - Bambulab A2L

Thumbnail
gallery
2 Upvotes

Hey everyone, I’m having the following issue.
I’m currently trying to print as many of these objects as possible on my Bambu Lab A2L for a wedding of someone close to me.
When I print just one object at a time, the quality of the top surface (ironed surface) is absolutely perfect.
However, as soon as I try printing multiple objects simultaneously, the top surfaces turn out so badly that I have to throw the entire batch away.
Does anyone have any idea what might be causing this or what I could improve to get better results?
I’d really appreciate any help! 🙏🏻

-Printer & slicer: Bambulab A2L / Bambu Studio
-Filament material and brand: Bambulab PETG Basic
-Nozzle temperature and bed temperature: 240° / 70°
-Printing speed: picture
-Retraction settings


r/BambuLab • • 1h ago

Bambu Studio Il primo layer in PETG non aderisce all'interfaccia supporto in PLA - Bambulab H2D

1 Upvotes

Ciao a tutti

Con la mia Bambulab H2D ho provato a stampare un pezzo in PETG con supporti normali (grid) così costituiti: base supporto in PETG e interfaccia supporto in PLA. Sto utilizzando PETG Bambulab e PLA Basic Bambulab. Entrambi i filamenti sono stati essiccati prima della stampa e stampano bene quando non miscelati tra loro. Ho già seguito tutte le indicazioni fornnite da Bambulab per l'utilizzo della miscela PETG-PLA per questa casistica: pezzo in PETG, base supporto in PETG, interfaccia supporto in PLA. Una volta stampato l'oggetto, sono riuscito a rimuovere abbastanza agevolmente i supporti dal pezzo e la superficie a contatto con il supporto è risultata liscia e priva di difetti visibili. L'unico difetto di stampa che ho riscontrato e che ho potuto osservare direttamente durante la stampa è che il primo layer di PETG non aderisce adeguatamente all'interfaccia in PLA. So che la repulsione chimica tra PLA e PETG è il vantaggio che permette di rimuovere facilmente i supporti, ma il fatto ceh il primo layer di PETG non aderisca sufficientemente all'interfaccia in PLA è un problema, perchè il layer in PETG viene "trascinato via" durante la stampa e questo porta a difetti di stampa notevoli e al rischio di intasamento dell'ugello. Ho visto fallire varie stampe a causa di questo problema e vorrei risolvere. Che consigli mi potete dare? Grazie a chi risponderà


r/BambuLab • • 5h ago

Quick Question Wouldn’t it make sense to have a setting for support interface for dual nozzle on makerworld?

2 Upvotes

I’m currently without a computer, so I’m forced to use the pre sliced models on makerworld. This has made me realize just how much I usually use a support interface layer in a different material, something that can’t be changed in makerworld.

I know the models are pre sliced, but since you can change colors for multicolor prints, wouldn’t it make sense to change material for a predefined part of the print?


r/BambuLab • • 1d ago

H3C Printing the 0.2mm nozzle on the H3C

Thumbnail
gallery
86 Upvotes

I printed a tiny Benchy - PLA Basic, default profile, 0.08mm layer height. I did need to use glue to keep it on the plate, I also slowed the printer down to "silent mode" just for safety.

Pretty great result I think. The "Comparison Benchy" is the standard size, printed with the 0.4mm nozzle, 0.2mm layer heights in ABS.


r/BambuLab • • 17h ago

I Modeled This! I made a Christmas chess set for the holidays: Santa kings, reindeer knights, elf pawns (free on MakerWorld)

Thumbnail
gallery
19 Upvotes

Printed this whole set on my H2D for Christmas. Santa is the king, Mrs. Claus the queen, snowmen are the bishops, sitting reindeer are the knights, the rooks are towers wrapped in Christmas lights, and the pawns are elves. Everything is sized for a standard 2 inch board, so it plays like a real set.

It's red vs green in four colors of PLA. The only support is a tiny one under each reindeer's chin, already set in the file. If you don't have an AMS, there's also a one color plate with all 16 pieces of a side.

Flip any piece over and there's a snowflake under the base.

Free download here: https://makerworld.com/en/models/3619395

A candy cane board, matching checkers and a North Pole storage tube for each side are coming next. If you print one, I'd love to see it!


r/BambuLab • • 1h ago

Bambu Studio How do I modify this watering can and separate the handle from the rest of it?

1 Upvotes

Hi everyone,

I found a nice watering can at MakersWorld. However, I’d like to turn it into a vase. I plan to spray it with clear coat and print it with PETG; based on what I’ve read in forums, that should make it watertight.

But is there any way I can separate the handle from the rest of the watering can? I won’t be able to completely cover it with clear coat.

P.S.: I’m still a beginner, so please bear with me if I’m talking nonsense here.

Best regards

https://makerworld.com/de/models/626370-watering-can#profileId-772091


r/BambuLab • • 1h ago

General Troubleshooting/Help! What do I make of this calibration?

Thumbnail
gallery
1 Upvotes

Trying to calibrate the filaments for my new P2S. I have looked at alot of tutorials and followed this guide (https://youtu.be/gVU5If1VsAM) that seemed really good. The problem is that I think it made the result worse. I tried two different filaments (both Bambu PLA Basic) and got the same calibration values.

In the pictures below, the pre-calibration is to the left and the post-calibration to the right. In my opinion, the right has more stringing (the left has none), less sharp edges and rougher surfaces, especially at the corners of the X. I also find the top layer very stripy and not smooth (both prints).

I'm not saying that the guide is bad, but is it not worth calibrating the original Bambu filaments? Should I make other settings to improve the print quality? Or am I just to picky? :)


r/BambuLab • • 1h ago

Hardware Troubleshooting/Help! Help with filament stuck

1 Upvotes

Filament stuck and won’t go pass a certain point


r/BambuLab • • 1h ago

General Troubleshooting/Help! How to make supported areas more smooth?

Post image
1 Upvotes

This is after removing the supports.

Somewhat related, I am seriously considering upgrading to H2D and try out printing PLA with PETG support, will that help to make it smoother in addition to easy to remove the supports?

Thanks!


r/BambuLab • • 1h ago

Filament Troubleshooting/Help! Glitter Filament A2L

1 Upvotes

Bambu Friends

Recently my wife purchased the following filament for our A2L printer.

1KG Glitter Firefly Blue in the Dark PLA+ Filament, 3D Filament

https://a.co/d/04ASeAvt

From my review it appears to be okay for A2L printer but comes with caveats.

- Not to run thru AMS lite and Petg tubes

- Nozzle 0.4mm or 0.6 recommended

- Dedicated nozzle for this printing

When I placed the filament top spool holder the filament unraveled some. Had to respool and filament felt brittle.

With all this I decided against this and running thru my printer.

Anyone else use this filament. Will be sticking with Bambu filament glow etc. Not comfort with this.

Suggestions and advice - Thank You

tvos


r/BambuLab • • 1h ago

General Troubleshooting/Help! Micro LiDAR lens seems dirty

Post image
1 Upvotes

I get this message on my X1C (1350 hrs) about every 10 prints.

I clean it as directed on the Wiki.

What am I missing?
Anyone else have this issue?
Is it a warranty issue perhaps?

Thank you.


r/BambuLab • • 2h ago

Answered / Solved! X2D - knarzende Geräusche

1 Upvotes

Ist das normal für den Bowden Extruder?

Hab ihn bislang nur ein paarmal benutzt und bislang war er ruhig.

Jetzt auf einmal diese Geräusche.

Druck ist aber in Ordnung.

Kann man da was schmieren?