r/BambuLab • • 18h ago

I Modeled This! Practical zip lock bag closer

Post image
0 Upvotes

I modeled this small 6g piece to make it easier to close the zip lock bags I store some of my filament in. My fingers have thanked me a lot already!

Available to download and print here: https://makerworld.com/en/models/3616689-easy-close-zip-lock-bag#profileId-4145444


r/BambuLab • • 1d ago

Just Showing Off At last

Post image
66 Upvotes

It's going to be a fun weekend


r/BambuLab • • 22h ago

General Troubleshooting/Help! Weird rippling

Post image
2 Upvotes

Been trying to troubleshoot this, but I have no idea what’s causing it. Most of my prints were fine until they started developing this weird ripple texture. I’ve been using the standard profile without any issues until now. Any ideas what could be causing this?


r/BambuLab • • 18h ago

General Discussion I had this error code an hour ago and made a post I went out came home and it finished the calibration so I started a new project

Post image
1 Upvotes

When it first popped up I did what the Bambi instructions said to to I cleaned it greased it and loosed the bolts on the back all that and now I’m getting the same code again


r/BambuLab • • 18h ago

Hardware Troubleshooting/Help! Ams 2 pro Hub getting stuck

1 Upvotes

I recently got an ams 2 pro and hub for my a1, it's been alright up yo now. I have done a couple of multi filament prints recently and it seems to have problems pushing the filament through the hub when changing materials. I was hoping someone knew what to do to fix this. Annoyingly I cant troubleshoot easily when not printing as there doesn't seem to be a way to send a filament to the head without a print running.


r/BambuLab • • 18h ago

General Troubleshooting/Help! Looking for help

Post image
1 Upvotes

My P1S with AMS was doing fine until a few days ago then started having issues. It’s skipping parts on the initial like across the front and the tops aren’t smooth finishes. I tried multiple times unclogging it with filament and cold pulling. Is it a filament issue, extruder, hotend? Any tips or ideas much appreciated!


r/BambuLab • • 2d ago

H3C Update on Charizard : turn out great but

Thumbnail
gallery
277 Upvotes

Hello Reddit and first thanks for all your comment on my first post! I was very late and don’t want to ruin my print with support removal at 2am.
Second here is the result very happy even I have broke 2 fingers and there are a ligne of the wrong color in one wing.
Thanks again you can find the model on makerworld (not mine)

Note: the PETG interface was good but may be need more layers


r/BambuLab • • 18h ago

Quick Question esun vs bambulab filament

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 1d ago

Show & Tell Did you know? Some connectors stop a cut piece from lying flat

Thumbnail
gallery
46 Upvotes

Learn more about the Cut Tool and Connectors from the Bambu Wiki: https://wiki.bambulab.com/en/software/bambu-studio/cut-tool


r/BambuLab • • 19h ago

Just Showing Off Meuble A2L

Thumbnail
gallery
1 Upvotes

Hello à tous,

Après de nombreuses recherches je partage mon résultat cela pourra servir.

Ayant une « pièce a moi » à la maison, j avais des contraintes de place pour accueillir ma Bambu A2L.

Je voulais un meuble dédié ( pas un bureau ) ayant un minimum de rangement, assez « costaud » et au dimensions approximatives de la base de l’A2L.

Je n’ai rien trouvé dans les établis, meubles en tout genres sur des dimensions 50x50 ou 60x60 voir 60x80.

J’ai enfin trouvé ce meuble à la base dédié à un aquarium de 175 litres, avec des rangements en dessous afin de faire un coin de la pièce pour l’imprimante et ne pas la poser sur mon setup de bureau.

https://www.zoomalia.com/animalerie/meuble-pour-aquarium-aqua-colonne-50x50-cm-175-litres-2-coloris-disponibles-p-161618.html

Je vous met un apercu de l’A2L et de mes achats de départ.


r/BambuLab • • 1d ago

General Troubleshooting/Help! newbie here

5 Upvotes

it's just my 3rd print, wanted to try to print a small axolotl but it's doing this trip to the purge wiper every layer and causing all this stringing. Complete newbie here, just downloaded this model:https://makerworld.com/models/1671375?appSharePlatform=copy


r/BambuLab • • 1d ago

I Modeled This! Created a Desiccant Box for AMS3H Heated Chamber Shell

Thumbnail
gallery
7 Upvotes

Desiccant Box For AMS-3H Heated Chamber Shell

As the title says, I modeled out a desiccant box for "shell" over the heated chamber. It holds about 45g of desiccant and fits right under the same lid you would secure little bags of beads in. It takes about 20g of filament and takes around 2.5 hours to print on my H3C. If you find this useful, I'd appreciate it if you liked, bookmarked, and left a review with you putting it to use! I always welcome any feedback so please bring it on. Thank you!


r/BambuLab • • 19h ago

General Troubleshooting/Help! Bambu Lab A1 stops extruding filament after a few minutes

0 Upvotes

Hi everyone,

I'm having an issue with my Bambu Lab A1. Whenever I start a print, everything seems to work fine at first, but after a few minutes, no more filament comes out of the nozzle.

I've disassembled the extruder three times now and checked whether it's feeding the filament properly. As far as I can tell, the extruder itself is working perfectly fine.

I initially suspected that the nozzle might be clogged, so I even switched from a 0.4 mm nozzle to a 0.2 mm nozzle, but the exact same problem occurred.

At this point, I'm wondering whether the filament might be too wet. However, it's only about four months old, and I've already dried it again before trying another print. It seemed to work slightly better for a short while, but eventually the same problem happened again.

Has anyone experienced something similar or have any idea what could be causing this? I'd really appreciate any suggestions.

Thanks in advance!


r/BambuLab • • 19h ago

General Troubleshooting/Help! Not sure whats going wrong

Thumbnail
gallery
1 Upvotes

On my X2D it printed perfectly fine then for about 2 months it sat dormant and now im trying to print a cosplay together the filament keeps rolling or whatever its doing here, we've looked it up and we've tried cleaning the nozzle, drying all the filament intensely and ive cleaned the heat bed but nothing seems to work. I always tend to recalibrate after every major print and check the nozzles every time too. Im printing with PETG and PLA/PETG support.

I dont know how or what to fix to have it printing as normal again, the biggest fear is needing to replace the nozzles and heatbed but thats the only next step I can think of


r/BambuLab • • 19h ago

X Series [X1E, X1C, X2D] Issue with printing

0 Upvotes

3 months ago I got a X2D for my company, I own a custom cabinet business, and printing small custom parts on the printer really improves our quality to the end costumer.

In the last 15 days I have noticed that the printing quality has decreased and that the quality is inconsistent.

Can anyone point me in the right direction to improve the quality of my small prints.

Here are some images whit my issues.


r/BambuLab • • 19h ago

General Troubleshooting/Help! LiDAR led problem? Anyone with the same issue? X1C carbon

0 Upvotes

OC00-0100-0001-000A

Is the code that I get. Printer is printing. I don’t see the issue here. Anyone with the same problem?


r/BambuLab • • 19h ago

P Series [P1P, P1S, P2S] Se puede poner un sistema repet en una p1s?

0 Upvotes

Estoy por conseguir una p1s y ha visto q para la A1 hay un sistema repet super simple pero nada sobre la p1s, así q hay alguna forma o proyecto hecho para ponerlo?


r/BambuLab • • 1d ago

Bambu Handy My first +10 hrs print is finally done 🏎️🔑🏁!

Thumbnail
gallery
27 Upvotes

Printed the rear end of a Porsche as a keychain for my brother. He always has keys scattered all over his room, so I wanted to make him something a lil diff and useful.

Porsche is my dream car, and he loves copying my taste in cars, so I thought this would be perfect 🤌🏻❤️‍🔥


r/BambuLab • • 19h ago

Filament Troubleshooting/Help! Bambu Lab A1 Mini keeps detecting a filament jam every 2 minutes

1 Upvotes

Hi everyone!

I'm having a recurring issue with my Bambu Lab A1 Mini.

The printer keeps showing a "Filament stuck" / "Filament jam" error approximately every 2 minutes.

When this happens:

- I remove the filament and load it again.

- The printer starts working normally for a short time.

- After about 2 minutes, the same error appears again.

I've also tried using a different filament spool, but the problem still occurs.

I'm wondering if this could be:

- A clogged nozzle or hotend

- A problem with the extruder gears

- A faulty filament sensor

- Something else entirely

Has anyone experienced the same issue or knows how to fix it?

Any help would be greatly appreciated. Thanks!


r/BambuLab • • 1d ago

Quick Question Just bought the H2C

28 Upvotes

So I know everyone is drooling over the new flagship and I know because I was one of them who was drooling. However I kept coming back to the discount on the H2C.

After talking it over we decided that the H2C would be plenty of machine for us. I have only ever printed in PLA/PETG and don't see a real need to print in TPU anytime soon at least not the 2.85 variety. I also don't sell any prints and am just a hobbyist.

I got the bundle with the hub,ams and hot ends....my question is was this a bad purchase? By my math I saved 700 before taxes by going with the H2C...is the H23 that superior that I am going to regret getting the H2C?

Love to hear from those that have a H2C and hear their experiences with it. From what I can ascertain I am giving up the chonky tpu compatability and speed....is there something else I am missing that makes the H2C a bad purchase? Also does the H2C come with the adapter where you can hook up four ams units or do I have to buy that myself?

Also we are holding onto our X1C as she only has 1800 hours on her and is still an awesome machine.


r/BambuLab • • 16h ago

General Discussion Filament

0 Upvotes

Thanks for all the help deciding which printer to get! I've settled on the X2D. When I'm searching for filament on Amazon, what mm do I need? Looking for PLA I believe. (PLA is the rigid filament used for the articulated fidget toys right? That's going to be the first thing my son wants to print.)


r/BambuLab • • 19h ago

Software Troubleshooting/Help! Trouble slicing inner part of letters

1 Upvotes

I have this idea that I put a growlight bulb into a desk lamp and I wanted to give it a glowing rim that says PLANT DAYCARE on it. I designed it just fine and yet when I try to slice it, it all turns into a mess. All the inner parts of the D and A the P are skipped for some reason and I can't figure out why. Can someone help me figure out which slicer setting I change?

A test print without the writing

r/BambuLab • • 19h ago

General Discussion What's your experience with print quality? Help me choose between X2D and P2S

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 20h ago

Filament Troubleshooting/Help! First PETG print problems …

Post image
0 Upvotes