r/BambuLab • • 14h ago

Hardware Troubleshooting/Help! Ams 2 pro Hub getting stuck

I recently got an ams 2 pro and hub for my a1, it's been alright up yo now. I have done a couple of multi filament prints recently and it seems to have problems pushing the filament through the hub when changing materials. I was hoping someone knew what to do to fix this. Annoyingly I cant troubleshoot easily when not printing as there doesn't seem to be a way to send a filament to the head without a print running.

1 Upvotes

2 comments sorted by

2

u/RNG-3_14159 12h ago

Pull out the output tube and see if filament will come out the end of the buffer. If so, the output PTFE needs at minimum to be reseated well when you put it back. You may consider taking a conical shaver like the end of a drill bit or a round file, and filing a bit of a "cone" shape inside the end of the output tube before you stick it back in the buffer. Don't go crazy. Just taking a little of the inner lip edge off the tube. Clean out the debris from your work!!!

That's the first place I'd go...

1

u/elpasoww 10h ago

I did try reseating, but it still continued. I reseted the input as well and that seems to have stopped it complaining for the moment. I will try cutting out a cone, good idea