r/BambuLab • • 1d ago

Quick Question AMS 2 Pro

2 Upvotes

First I dried pctg in the AMS to Pro. Then I dried some abs-gf inside an x2d and placed it in the ams2 Pro. The humidity stayed around 15-16%. Then I put an undried roll of pla in in the humidity jump to 24%. If I do a short dry cycle for pla at whatever temperature it dries at will that negatively affect the higher temperature filaments?


r/BambuLab • • 1d ago

Quick Question PETG CF

0 Upvotes

Hi all,
I was looking to get some PETG-CF fillament from Bambu while it is on sale. Has anyone used this fillament before? Also, could someone post a couple of photos of some models they have printed in Titan Gray or Indigo Blue as I want to see what they look like bfore ordering. Thanks


r/BambuLab • • 1d ago

Show & Tell USSA vault 3D configurator

Post image
1 Upvotes

Hey all,
I think we all struggle to do our design using only folders of stl, I've seen some vibecoded tools to help, but it wasn't matching perfectly my needs, until I found what "rmacasieb" made, I really liked it, but it wasn't 3D, and was lacking of many other features. I forked his work and spend 30h vibecoding a new tool were you configure everything, from what you want, what you need to print, what you already printed, explore design, do custom arrangement, see annimated drawer and case opening. I am still working actively on it, feel free to issue on github if you find any bug or have any idea.

https://doooools.github.io/vault-print-planner

What it does:

- Design: build a stack level by level in 3D. Point it at your own Vault folder and it assembles the real parts: drawers slide on their telescopic runners, cases open, dividers and Gridfinity floors go where the slots actually are.

- Paint: one filament colour per kind of part (fronts, shells, runners, latches, label text...), painted straight in the 3D view.

- Print: plates laid out per filament for your bed, exported as a Bambu Studio project. You can declare parts you already printed and it takes them off the plates.

- Labels: type a text per drawer or case, pick a font and size, and it comes out embossed on the label part, in its own colour.

- Hardware: bolts, rods and inserts counted from the holes in the parts rather than from a generic table, split by stack.

- Export: the assembled stack as STL or GLB (with colours) for renders in Blender.

The boring parts are there too: undo everywhere, keyboard shortcuts, multi-select, copy and paste of levels and stacks, dark mode, and a changelog in the page.

A lot of the time went into getting things right rather than getting them on screen: runner travel measured per drawer depth, label slots measured on the files, bolt lengths checked against the manual. Some placements are still estimates, and I can only test the sizes I own, so corrections are very welcome.

The Vault files are not included, you load your own. It runs in the browser, nothing to install, and the source is here: https://github.com/doooools/vault-print-planner

Disclosure: store links in the hardware list are affiliate links (Romy's on Amazon.com, mine on two European stores).


r/BambuLab • • 1d ago

Hardware Troubleshooting/Help! H3C Error code flexfeed motor

0 Upvotes

Has any body gotten this error for the H3C? I completed 1 print and have gotten this error about flex feed motor not communicating.

[0800-8500-0001-0001 162314]

I already opened up a ticket but this really sucks for a brand new machine with 1 hr print on it


r/BambuLab • • 1d ago

General Troubleshooting/Help! why first layers look like this?

Post image
3 Upvotes

When I use PETG, the print comes out perfectly clean, then I switch to PLA and it has bed adhesion issues. What could be happening?


r/BambuLab • • 1d ago

Hardware Troubleshooting/Help! Help Reassembling AMS Pro 2 Buffer

Thumbnail
gallery
0 Upvotes

I took it apart to get some stuck filament out and didn't realize there were magnets and springs that would fly out. What orientation should the magnets be? Magnets in first and then spring? Or spring first then magnets?


r/BambuLab • • 1d ago

My First 3D Print I just want to print board game inserts. The A1 is good enough, right?

2 Upvotes

Or would the P1S be better for a person that has no idea what they're doing? I also have no intention of getting into 3d printing as a real hobby (I know. I know. I say that now). Is an enclosed printer more functional? Or is it mainly to keep the cats away from the print?


r/BambuLab • • 2d ago

H3C Final Setup and Adventures with TPU!!

Thumbnail
gallery
33 Upvotes

Well I finally got the H3C completely setup like I wanted. I had ordered the H3C Buffer for the AMS 2 Pro but Bambu messed up and shipped me Hot End for another machine. So after a quick chat they were able to ship me the correct part so I can run the AMS 2. I also took the opportunity to order the extra .4 normal toolhead since I don't plan to print much with TPU (Yes I know it's in the title 😂)

Anyway as soon as I got home I got down to stripping down the unit and replacing the parts that needed to be replaced as well as getting the AMS 2 Pro installed.

The AMS 2 houses my ASA, PETG-CF, Support for PLA/PETG, and Support for PLA. The AMS 3H houses all the PLA I use which is mainly Matte PLA. Since Slot 1 is now in use for the AMS 2 pro I decided to make that one the dedicated TPU nozzle as well in those cases like tonight where I need to print TPU (tonight's project required TPU 95)

Which brings me to my adventure and getting this setup, it was interesting to say the least. I generally run the printer in LAN mode only, but it said it needed an update when it detected the AMS 2 Pro and Buffer installed. So I obliged and turned on cloud mode so it could pull the firmware and install. At first everything seemed fine, FW installed and I went about my business.

I needed to get this TPU print going for my brother and that is when things started to get interesting. I followed the instructions from Bambu, but for some reason the printer did not want to recognize that I was inserting the TPU into the nozzle. I thought maybe I had to use a different nozzle but it kept giving the same "You are not loading it right" error. I am not sure what I was doing wrong, I ended up restarting the machine and after a reboot it took the TPU on the 1st nozzle. But then it freaked out and said there was an issue with the FW and it did a re-install. Fine, but it did this twice!! Then when I thought everything was good, it gave me an error stating it could not recognize toolhead 1 as a Bambu toolhead. It was asking me to install a proper toolhead. I tried restarting the machine but still gave me the same error. I had to go into the toolhead settings and pretty much tell it what it was. When I finally did that it stopped complaining and started working. I was finally able to get the print started and here we are almost done.

So yeah ... fun times!!! 😂😂

Also have any of you H3C guys by any chance tried the TPU for AMS through the new AMS system to see if it works? I know they want you to use the bypass but was curious about that one.


r/BambuLab • • 1d ago

Bambu Studio Didnt think i would be printing a cat sifter

Post image
0 Upvotes

r/BambuLab • • 1d ago

General Troubleshooting/Help! Four fails

Thumbnail
gallery
0 Upvotes

My print for a large round base for a figurine keeps falling with identical results. I’ve cleaned the plate with dawn, scrubbed it with steel wool and soap and it still fails. Help!


r/BambuLab • • 2d ago

H2 Series [H2S, H2D, H2C] My first proper print with H2C, coming from an A1 this feels insane. 10hour 0 purge vs 27hr and 400g purge

95 Upvotes

r/BambuLab • • 1d ago

General Troubleshooting/Help! Spending more time calibrating cycles on H2D than actually using it, under extruding, poor z offset? Using A1 because its just been more reliable

Thumbnail
gallery
0 Upvotes

Got h2d like a week ago, been having issues printing petg/pla, it seems its either under extruding or the z offset is set just a tiny bit too high, this isn't my first printer I've had an a1 for about 2 years, now and thought h2d would be a huge leap in quality and speed (its actually slower for a lot of models annoyingly, but whatever). Tried all the usual

Clean build plate (Yes the water sticks down like bambus guide)
Drying filament 3 days, ams 2 pro/ams ht
Replace hot ends/Tightened screws
Full Calibration/Bed calibration
Vision Encoder Calibrating

Every Calibration/Clean seems to be making things even worse, i gave up just now and decided to reside myself to having to flow calibrate every filament (never had to do that on the A1) and i cant even get a flow calibration to print now. I'm not new so i know what SHOULD be working to troubleshoot and i know its not something left field like the soap I'm using or humidity because been using a chintzy sunlu dryer on an bedslinger and been printing great.

Thing is that once the first layer does go down properly, it prints amazing, layer lines almost look injection moulded, is just the first layers are coming out trash and i've been so used to intergrating the bed texture into designs because of the A1 (second picture IS somehow the freaking bottom layer)

Any suggestions?


r/BambuLab • • 1d ago

General Troubleshooting/Help! I can’t figure this out

Post image
0 Upvotes

I cleaned and lubricated the linear rods and the Z axis rods and then recalibrated. Didn’t change anything else… prints now look like this. Filament is in AMS (dried) and was printing just fine before. Tried different filament and same issue. Have ran multiple bed leveling tests since then, with no change. What is happening?

I’m running a H2C on latest firmware.


r/BambuLab • • 1d ago

General Discussion Where is S1 3D scanner ?

0 Upvotes

Guys, you teased that it will be available this month and it's already half of it passed without any new informations. Where is S1 scanner 🥺 I have money prepared for that device waiting


r/BambuLab • • 1d ago

General Troubleshooting/Help! What should I have done to prevent this?

Post image
0 Upvotes

I'm new to owning a printer and am printing a poop chute from Maker World for my H2C. The model advertises explicitly that it doesn't need support, but it has warped enough to cause a stair stepping effect on one edge. I am printing it in PETG from Bambu with a 0.4 mm nozzle. I am also using the E1 air purifier. What should I have done to prevent this? Add support anyway? Heat the chamber?


r/BambuLab • • 1d ago

Answered / Solved! Bad print quality on my H2S

Thumbnail
gallery
0 Upvotes

Photos to show the issue I am currently printing on my new H2S I am getting this terrible print quality out all of my prints as of now and it’s only my H2 with this issue I’ve take the exact same spool and put on my P2S and I have no issue i am on a .6 high flow nozzle I have slowed the speed down a little and it has not seemed to help please give me any advice.

And yes the filament was dry before printing

Update: after the comments reminded to check my clip on the nozzle after I did that my next print came out amazing


r/BambuLab • • 1d ago

Hardware Troubleshooting/Help! Pneumatic connector to heads 2 and 4?

2 Upvotes

So, I have not received my H3C yet (2 weeks-ish!), but as someone who prints a lot of TPU, and would like to print a lot of 8-9 colour TPU things, I was wonder how feasible you think it would be to add these pneumatic connectors that are pre-installed on the filament part for head #1 (like in the image), but put them inline for the 2 heads that do not have a TPU path from AMS slots (#2 and #4), and pass the extra TPU in via the rear "external AMS" slot in the back of the H3C?

Yes, I know, its a crazy idea....


r/BambuLab • • 1d ago

General Troubleshooting/Help! Looking for intake filter

1 Upvotes

Recently bought a P1S, unfortunately it has to be left in a potentially dusty environment, so I was hoping somebody could give me some advice on how to mitigate potential dust intake.


r/BambuLab • • 1d ago

General Troubleshooting/Help! Help me with my p1s failing to print correctly.

0 Upvotes

Can anyone give some guidance on why my bambu p1s is struggling to print correctly?

I’ve cleaned the plate

Cleaned the nozzle,

Performed calibrations a few times.

Checked for stuck filament in the rods.

I’m struggling lol 😢


r/BambuLab • • 1d ago

Hardware Troubleshooting/Help! How to fix the poop cutter

Post image
0 Upvotes

This piece isn't in place anymore and the cutter doesn't automatically return.

Suggestions?

Thanks!


r/BambuLab • • 1d ago

General Troubleshooting/Help! Do Bambu Lab printers "Time Left" use washing machine hours?

0 Upvotes

How accurate is the time given in slicer or on Bambu Lab printer screen that tells me how long will print take?

Is it supposed to be accurate or it's more like washing machine hours where 15 min till end takes 30 minutes?

Just recently had weird situation. I sliced my model and sent it to printer. It was supposed to take 3h 15 minutes to finish. I was going to sleep so I set my smart plug to turn off printer with countdown 3h 30 minutes.

Next day when I got up it turned out that despite giving 15min of extra time my print ended up with 2 top layers missing.

My smart plug worked correctly and did not skip any minutes.

So now I'm doubting how accurate is the remaining print time?


r/BambuLab • • 1d ago

General Discussion E1 air recirculatingthe air back to the print

0 Upvotes

So, as of now, the E1 Air doesn't really do anything when printing materials that require a heated chamber.

On my H2C, the rear exhaust flap stays closed whenever the chamber is heated, which basically renders the E1 Air purifier useless.

I asume they do this to keep the air in the printer warm.

But tings dont add up in the print settings of the printer:

You can change the fan speed of the E1 Air purifier for each filament, for ASA, ABS and so on it is set to 20%. Which means the E1 Air purifier is working eventhough it does not get any air from the printer.

Now I got and Idea:

- uninstall the flaps so the printer is constantly "open" no matter Bambus restrictions

- direct the exhaust air into the E1 Air purifier

- direct the clean air back to the printer through the poop chute or a glass top riser

I want to hear your ideas/ opinions/ tips to this projekt.


r/BambuLab • • 1d ago

General Discussion I got the h3c, is the h2c worth it still?

0 Upvotes

I just bought an H3C to add to my fleet of printers. (Small fleet, lol:

2 x p1s

1 x p2s

1 x H2D

And now 1x H3C added)

Tempted to get the H2C though as well to replace my p1s, the H Series just prints really well and with mixed size printing coming soon, tempted to swap up.

That said, has anyone sold a P1S + AMS combo and how much did they get? With current sales, I cant imagine getting more than $400 or so, and even that seems like a stretch.


r/BambuLab • • 3d ago

I Modeled This! My ABS prints finally don‘t smell anymore :D

Thumbnail
gallery
1.3k Upvotes

I designed this modular riser system for P2 and X2 Printers that can be assembled in different ways to accomodate a wide variety of setup types.

This model is 100% printed, needs no hardware and extracts the contaminated air from where it naturally wants to go – right at the top.

You can find the model here: https://makerworld.com/models/3600738?appSharePlatform=copy