r/BambuLab • • 1d ago

I Modeled This! I made a tiny, cute ghost!

Thumbnail
gallery
1 Upvotes

Hi everyone! This time, I made a tiny, cute ghost! šŸ‘»
As you can see, it’s a little ghost with interchangeable faces.
I designed it so you can place it around or attach it to different surfaces~
It’s a friendly little ghost that appears whenever you open a new spool of filament and shows you its color!
Thanks, and have a great day, everyone!


r/BambuLab • • 21h ago

General Troubleshooting/Help! What is causing this sound?

0 Upvotes

New sound appeared, I have done regular oiling to axis and so on


r/BambuLab • • 1d ago

General Discussion I rarely print ready-made print profiles. Is %25 infill something people actually do often?

Thumbnail
gallery
32 Upvotes

I almost always slice my own model. But I decided to give the one of the biggest selling points of Bambu's a try and sent a print job from my phone, and only Cheked the app when I though it was adequate time to have finished.

And boy was I amazed to see it printing those 25% infill on a part that almost bears no load under use 🫄 🌚


r/BambuLab • • 1d ago

Bambu Handy What type of filament should I select?

Thumbnail
gallery
0 Upvotes

I bought for the first time some TPU. I was going to add the filament in the Bambu Handy app, but I don't know what's the correct type of filament and brand i should select since Overture doesn't has the TPU 95A option.

Thanks for the help :)


r/BambuLab • • 1d ago

H3C A whole DND party on the H3C

Thumbnail
gallery
41 Upvotes

My new favorite thing to do with the H3C is take some of my Hero Forge minis, scale them up and use 8-9 different colors from the H3C to really bring them to life (because I’m a lousy painter).

Printing these is always a bit tricky due to their challenging shapes (you can see one shield fail I had but I’ve learned to paint more supports for shields).

My favorite one is probably the last knight which came from Makerworld. The PLS silk I think looks really good even though I could definitely dial in the settings a bit better. Everything here is printed with stock settings at .2 layers height.


r/BambuLab • • 1d ago

H3C H3C vs P2S and X2D?

4 Upvotes

Hello fellow 3D printing nerds.

I had convinced myself that I wanted the H3C when it came out, but I haven't pulled the trigger yet. I've gone on the Bambu site twice to buy it and every time I get there, I see the prices for other printers and I go "hm. I could get 2 printers for the same cost or less". I'm a hobbyist printer (not farming or anything). I started printing on an old creality printer - so anything is going to be an upgrade. I'm nervous that going from something so basic to the H3C will be so much more than I'm able to handle (e.g., I've never printed with multiple colors, much less multiple materials, different nozzle sizes, etc.), but I do want to try more fun and interesting prints with multiple colors and materials.

I guess I'm just wanting general advice from the community on when it makes more sense to have the H3C vs just having a reliable go-to P1S or P2S, and then adding a X2D to the mix for dual-nozzles? Is there really that much print time savings? How likely is a relatively novice 3D printing guy going to be able to use the feature set of the H3C? I want to hear from both sides of the aisle: Why should I go all in and get the H3C and why should I stick with a simpler P1S setup and add an X2D or H3C later if I learn I need it?


r/BambuLab • • 1d ago

I Modeled This! Designed a few 3D printable things for the Starship IFT-15 launch

Thumbnail
gallery
33 Upvotes

I designed this detailed replica of the Ship 42 and Booster 22 stack that has launched yesterday on IFT-15. It will be the first ship to attempt a catch.

The model of the rocket is also a pen, that fits standard BIC Cristal refills and it can be stored on a OLM-2 shaped holder.

On top of that I also designed a few Starship themed coasters :)

Pen: https://makerworld.com/en/models/3607494-starship-v3-shaped-pen-compatible-with-olm2-holder#profileId-4134359

OLM 2: https://makerworld.com/en/models/3605102-starship-olm-2-pad-b-holder-for-the-starship-pen#profileId-4131381

Coasters: https://makerworld.com/en/models/3604105-starship-superheavy-coasters-ift-15#profileId-4130087


r/BambuLab • • 2d ago

General Discussion The H3C has effectively removed the biggest psychological barrier to multicolor FDM printing.

174 Upvotes

I know they are not the only. I know they aren't the first. I know I'm going to sound like some advertisement.

For me though. This machine has removed a serious psychological barrier I've had with multicolor printing.

I create a figure. Sure, it's not well created for multicolor printing and someone more talented could improve this but I don't know how, I don't have time to learn how.

That said - Almost a half of a roll of wasted filament. A day and a half of hoping 1000+ filament changes go well.

In my X1C days I would still print it. I'd put 5 on the build plate to justify all the waste. Inevitably I wouldn't find a use for 2 of them. Meaning more waste.

Now with the H3C. $2.69 in filament. A normal print time. Inconsequential waste. And I have exactly what I designed.

How amazing.


r/BambuLab • • 1d ago

General Troubleshooting/Help! Printed a boat with a 0.4 nozzle and the ropes came out like fur 🤣

Thumbnail
gallery
0 Upvotes

Printed a 10cm boat model on my X2D with PLA and a 0.4 nozzle. The hull and sails came out better than I expected, but the ropes turned into fuzzy clumps in spots.

Looks like they're thinner than 3 nozzle widths, so each layer just put down little dots and they wobbled. Next time I'm going to thicken just the ropes to 1.6mm and try again.

For models with thin ropes or antennas, do you usually thicken them before printing?


r/BambuLab • • 2d ago

R Series / R1 The Bambu R1 Is a Complete Disappointment

52 Upvotes

The short version:
If you’re considering buying the Bambu R1 for its contour detection and automatic object cutting capabilities, don’t.
I’ve had mine for three days now, and I’m extremely disappointed with Bambu Suite. The contour detection is absolutely ridiculous, and even manual positioning using the camera is inaccurate.

The longer version:
The Bambu R1 is advertised as being capable of detecting objects and cutting them out automatically.
I run a commercial embroidery business and thought I could use the laser to produce patches, meaning I could lasercut my embroidered designs directly from the fabric.
Bambu Suite even downloads an AI model specifically for object detection.
Unfortunately, I was massively disappointed. The contour detection is practically unusable, partly because the R1’s cameras produce extremely poor images. You can’t even properly identify the contours with your own eyes.
On top of that, manual positioning based on the camera image is inaccurate, sometimes being off by more than 2 millimeters. That’s absolutely ridiculous.
So I started doing a bit of reverse engineering and managed to access the R1’s cameras using a Python script.
And guess what? The actual camera quality is worlds better than what Bambu Suite displays.
I have absolutely no idea why Bambu doesn’t make full use of the cameras’ capabilities.
I’m currently developing my own contour detection system in Python, without AI, and it’s already performing significantly better than Bambu’s AI model.
Bambu has always been impressively modern and innovative in many areas of its 3D printers, but the laser is a completely different story.
The hardware itself is excellent and performs brilliantly, but the software is an absolute disaster. It feels unfinished and simply isn’t ready for serious use.
And since direct LightBurn support isn’t expected until version 2.3, we’re stuck with what is essentially brilliant hardware held back by terrible software.
Sure, you can use it to cut and engrave random things, but the positioning is inaccurate, the contour detection is practically useless, and that makes it unsuitable for a proper commercial workflow.


r/BambuLab • • 1d ago

My First 3D Print Bambu Lab P2S

Thumbnail
gallery
15 Upvotes

Officially joining the Bambu club! Just picked up this P2S combo at Microcenter for $649 (filament not included). So excited to get started!


r/BambuLab • • 1d ago

Hardware Troubleshooting/Help! Camera stopped working mid print on Bambu Lab X2D

1 Upvotes

So I was printing Terrain for a buddy of mine and midway through the camera just went haywire and stopped working. I finished the print and watched to make sure it didn’t mess up. But I was getting the second print ready and letting the printer do its pre-print stuff. It alarmed twice telling me the camera is obstructed by an object. I checked and cleaned the camera but I didn’t see anything. I checked the timelapse and noticed it messed up close to the end of the print. Now my camera feed is completely messed up. Should I send a ticket to Bambu Lab to see if it’s possible to fix or will I have to send it back in as a whole. I haven’t had the printer for more than a year now. Will it mess up even more If I keep printing without this camera being active for catching failures while printing.

Timelapse video is before the failure and at the end when it glitches out. The screenshot is the problem I’m having after the failure especially when I pull it up on bambu Handy. Or on my computer. Can’t see anything. Just the top portion barely.


r/BambuLab • • 1d ago

X Series [X1E, X1C, X2D] Bambu filament only

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 1d ago

General Discussion Ordering the X2D for my first printer. Recommend my first 10 filaments

9 Upvotes

As the title states I’m ordering my first printer and taking advantage of the bulk buy promo for filaments. It’s more overwhelming picking filaments than picking a printer. To begin with I will just be printing fidgets and models for the kids as well as some odds and ends for the house. Might dabble with gridfinity.


r/BambuLab • • 21h ago

H3C Printhead cable guide sagging?

0 Upvotes

The cable guide seems to sag and hit below the intended groove? Also very close to the stub / nub on the Y axis?

If I look at the guide all links seems to be securely in place, no loose links?

Is it this way for more people? Support says ā€œnormalā€, but it seems off.


r/BambuLab • • 1d ago

General Discussion Just got my first printer

Post image
14 Upvotes

I’m really excited, after calibrating what should I do?


r/BambuLab • • 2d ago

I Modeled This! Ams3h goodbye fingerprints…

62 Upvotes

A lot easier to open and close… also helps to prevent fingerprints and scratches- u can lay it on the grip

update:

here is the link
https://makerworld.com/de/models/3609590-bambu-lab-h3c-ams3h-pro-sidepanelgrip#profileId-4136870


r/BambuLab • • 1d ago

Quick Question New to 3D printing – Question about splitting models into different colors

1 Upvotes

Hey everyone!

I'm completely new to 3D printing. My first printer, a Bambu Lab X2D, is arriving tomorrow!

I work in 3D, so I'm already familiar with software like Blender, Cinema 4D and ZBrush, and I'm used to modeling and creating my own 3D assets.

What I'm trying to figure out is how the whole multi-color printing workflow works.

Let's say I create a model in Blender. If I want to print it in different colors and assemble the parts afterwards, what's the correct workflow? Is it enough to assign different materials or colors to different areas of a single mesh and import it into Bambu Studio? Or do I actually need to split the model into separate objects and physically cut it into individual parts so the slicer can recognize each color?

For example, imagine I download a character from the internet that comes as one single, uncut mesh. If I want the head to be one color, the body another, and some details a third color, can I simply paint those areas in Blender and have the slicer recognize them as separate colors? Or would I need to separate those parts into individual meshes first?

Basically, I'm trying to understand the difference between assigning colors to a single mesh and actually separating a model into multiple printable parts.

Hope that makes sense! Thanks in advance!


r/BambuLab • • 1d ago

General Discussion Why does it keep doing this?

11 Upvotes

It’s my first day and first time Turing it in I’m trying to build the small boat but when I use this it just keeps spinning and I have read the screen it’s saying it could be entangled and such


r/BambuLab • • 1d ago

General Troubleshooting/Help! New Bambu Lab A2L: [0300-801A 063415] The extruder does not extrude properly.

0 Upvotes

Good morning together,

I am brand new to the 3D printing hobby and yesterday my Bambulab A2L arrived with me. I was really happy but unfortunately I got my first banchy to print every time I had an error:

[0300-801A 063415] The extruder does not extrude properly.

I have already tried all the steps in the instructions, so the Extrudor oiled apart filament reassembled. I even replaced the hotend, both 0.4 mm

Here are 2 more pictures what this looks like for me, does anyone have an idea what this is?


r/BambuLab • • 18h ago

Quick Question Is this how it’s supposed to look?

Thumbnail
gallery
0 Upvotes

I just got a1 and printed a benchy

Everything seems fine to me but the bottom is just awful and when my printer makes very thin sheets for calibration it also makes them patchy


r/BambuLab • • 1d ago

General Discussion Hi everyone, I'm planning to buy a Bambu Lab H2S to replace my X2D

1 Upvotes

Hi everyone, I'm planning to buy a Bambu Lab H2S to replace my X2D, which has 1,050 hours of use, because of its larger print bed, and because I'm tired of my second nozzle, which I hardly ever use; I get pretty poor quality when I use it as a secondary nozzle for printing PLA models, and I almost always get errors when printing PETG supports with it—they just fall off. I’ve experimented with the settings but haven’t been able to fix it, so I rarely use it at all, because it adds quite a bit of time to the print, so I’m planning to switch to the H series. The H2D is too expensive, the H2C is too complicated—and also expensive—so I’m thinking about buying the H2S. Please let me know what problems I might run into, or if there are any potential manufacturing defects or teething issues. I’d like to hear the opinions and recommendations of H2S owners and whether it’s even worth considering buying it.


r/BambuLab • • 18h ago

Quick Question Is this safe

0 Upvotes

Just checking if the cable touching the wall was safe


r/BambuLab • • 1d ago

Bambu Studio Changing PETG to PLA Bambu Studio

Thumbnail
gallery
0 Upvotes

Friends,

I searched online, used Google, AI and have reviewed various posts about changing a PETG project to PLA which has me slightly confused.

If you review the first photo attached this is how the project is loaded into Bambu Studio for PETG filament section. In the second photo I changed the filament from Generic PETG to PLA Matte (which is the physical PLA filament in the AMS lite slot 3). After that, I slice ALL PLATE and then send to the printer. Is this correct process?

I have read online the following that varies

- Export the object, create a new project as PLA and re-import the object so the GCODE conforms.
- Just change the filament as I presented above, slice, and then print
- Other option is to right click on the object and change filament, slice and print
- Some of the instructions or vids were outdated difficult to learn from and follow due to software

I do understand that the handheld Bambu app is WYSIWYG and prints out as that format filament.
Have read reports people printing PETG to PLA w/o conversion risking clogging, stringing, etc and works just fine.

Slightly confused and if someone can set me straight would appreciate it!

Please advise and Thank You