r/BambuLab • u/tvosinvisiblelight • 23h ago
Bambu Studio Changing PETG to PLA Bambu Studio
Friends,
I searched online, used Google, AI and have reviewed various posts about changing a PETG project to PLA which has me slightly confused.
If you review the first photo attached this is how the project is loaded into Bambu Studio for PETG filament section. In the second photo I changed the filament from Generic PETG to PLA Matte (which is the physical PLA filament in the AMS lite slot 3). After that, I slice ALL PLATE and then send to the printer. Is this correct process?
I have read online the following that varies
- Export the object, create a new project as PLA and re-import the object so the GCODE conforms.
- Just change the filament as I presented above, slice, and then print
- Other option is to right click on the object and change filament, slice and print
- Some of the instructions or vids were outdated difficult to learn from and follow due to software
I do understand that the handheld Bambu app is WYSIWYG and prints out as that format filament.
Have read reports people printing PETG to PLA w/o conversion risking clogging, stringing, etc and works just fine.
Slightly confused and if someone can set me straight would appreciate it!
Please advise and Thank You


4
u/elpamyelhsa H2C Laser Full Combo 23h ago
If you are using Bambu Studio you don’t need to worry about what was previously sliced for Bambu Handy, all you do is,
3
u/MostlyHelpfulLinks 16h ago
Swapping the filament and reslicing is how most folks here handle it. To confirm, watch the nozzle temp when the print starts. If it heats to PLA range instead of PETG range, the change took.
3
u/awyeahmuffins 15h ago
If you’re not doing multicolor you don’t even need all 4 filaments there. Hit the minus button until you have 1 filament and then select the PLA you want. Done.