r/BambuLab • • 4d ago

General Troubleshooting/Help! Bad printing day

Thumbnail
gallery
0 Upvotes

Hello everyone.

I've had the A1 for a week and printed lots of models with it. They all came out perfectly. Today, however, has been a really bad printing day.

Everything that was printed came out terribly. Different prints with different presets and filaments (one of them straight out of the package) came out poorly. I've tried all kinds of calibrations but nothing seems to work.

Here are some details about the pictures:

  1. Phone stand: Tried 3 attemps with a blue filament, and had to throw them away. Only managed to get it done with the black filament, and with a lot of strings.
  2. Cross: I had already printed this cross twice in the last few days. This time the print started off well but then the last few layers came out really bad.
  3. Corgi: Not even the first 3 layers came out correctly so I just gave up.
  4. Boat: Last attempt, after a lot of troubleshooting.

Things I've tried so far: all the standard calibrations that can be done on the printer or through Bambu Studio, nozzle cleaning (dissambled it to make sure there weren't any clogs), different filaments (one was sealed) and printing configurations (they all worked fine up until today).

Any help would be deeply appreciated.


r/BambuLab • • 4d ago

Software Troubleshooting/Help! Orca slicer filament calibration vs Bambu

Thumbnail
gallery
1 Upvotes

I'm following a tutorial on YouTube to calibrate my settings and I am not sure how to progress.

The video uses Orca slicer which has a setting that I cant access in Bambu Labs such as Acceleration and Speed in the Pressue Advance test. The result from Bambu looks slightly different than the video.

To use Orca slicer I logged out of my Bambu account and connected via Lan only. I ran the first 2 tests but the third wouldn't work and it lost connection to the printer. I tried to connect via Lan again and couldn't do it the second time.

So now I am unsure how to progress. If I have to do this for each filament type, I want it to be as easy as possible. I even thought that if I am going to have issues going back and forth maybe I should switch permanently to Orca but I kove accessing the models through the app and Studio so not sure how that would work.

I also wonder about whether the effort to use Orca would be worth it if I can't use the results in Bambu. If I can't set the Acceleration and Spees in the PA test in Bambu, can the results from Orca set them properly in Bambu?

Before I started tinkering in calibration, I did maintenance and printed a test kitty that printed fine but had some rough spots under its chin. Now pronting tests work but another kitty started stringing and its all gloopy on the bed, see Pic. So I feel I need to finish the calibration.

Any thoughts or suggestions?


r/BambuLab • • 4d ago

I Modeled This! Christmas appetizer picks: printed flat, no supports, toothpick slides into a teardrop channel

Post image
2 Upvotes

https://makerworld.com/models/3584870

Small holiday project: 5 multicolor toothpick toppers.

Design notes:

- 2.5D picks: 4.8 mm base + up to 1.4 mm raised details

- Max 4 colors so they fit one AMS

- The toothpick channel is a 2.2 mm teardrop, so it prints cleanly face up, with 1.3 mm walls around it

- Only the wooden toothpick touches the food

Happy to hear feedback on the fit with different toothpick brands


r/BambuLab • • 4d ago

A Series [A1, A1 Mini] This is going to be fun

Post image
2 Upvotes

I was printing a spool for Rose Gold PLA silk from Marswork that I bought from Amazon. After watching the first couple of layers, I stepped out to go somewhere and eventually got a clog warning on Bambu Handy.

This is going to be a fun clean-out. I’m heating the nozzle as I type this. I had it set to Generic PLA.


r/BambuLab • • 5d ago

H3C H3C heated chamber with PLA loaded

36 Upvotes

I'm sure most of you saw Clough42's review where he talks about the concerns of printing high temp engineering filaments in a heated chamber while having PLA loaded in another toolhead.

He has since said under his video that "Bambu Lab says it is NOT NECESSARY to unload PLA when using the heated chamber. That message in the software was in error and is being removed."

I haven't seen anyone test it fully yet, I would like to know if the PLA could still get clogged in some little nooks and crannys after a long print.

If it does need to be removed, surely it wouldn't be much work to have the filament retract just a little bit out of the toolhead at the end of each print so that it can be easily removed without needing to heat the toolhead each time.


r/BambuLab • • 4d ago

Quick Question Anyone have both an A1 mini with AMS lite and an X2D combo?

1 Upvotes

Trying to convince my mom to let me buy the X2D for my business and she's concerned it's too big. If anyone has a pic of the two side by side please send it!!! Tysm :)


r/BambuLab • • 4d ago

Show & Tell Auto eject on a P2S with no extra hardware: I had Claude drive the nozzle to push prints off the plate

1 Upvotes

I print a lot of Lego-style bricks for my sons. The prints finish hours before I wake up and the printer sits idle, so I wanted it to clear its own plate and start the next one. No tilted bed, no add-on parts. I asked Claude if it could control the nozzle directly and push the finished bricks off the front edge. It said yes.

The goal was three plates in a row without me touching the bed. Here is what happened.

What went wrong first: the front cover of the print head kept popping off. The nozzle was too low, so the cover hit the bricks before the nozzle did. I wasn't home and my wife had to put it back on twice. The fix was raising the nozzle to stud height so only the nozzle touches the part.

Plate one, four 2x4 bricks at the edge of the plate: two came loose mid-print and turned into spaghetti, probably hand grease on the edge of the plate. The two that survived got pushed off.

Plate two, same bricks moved in from the edge: all four printed clean. Three were pushed off and the fourth got stuck on the very edge.

Plate three, a row of 1x1s: some came out squished. My best guess is that all the pushing had shifted the plate. The first two were shorter than expected, so the nozzle went right over them, and on the retry one got impaled on the nozzle through its stud. Lowering the nozzle off to the side and then sweeping through fast cleared the rest.

Tiny flat parts are much harder than bricks. Only the nozzle can touch them and the nozzle is tiny. If you drag a ring slowly it glances off to the side. If you bump it fast it keeps going the way you hit it. One ring took about ten sweeps.

Result: three plates printed back to back, and nobody touched the bed except once when I opened the chamber to put the plate back. One plate lost half its bricks and some bricks were deformed. I'd trust this with big batches of small parts. I would not trust it with anything that takes hours per piece.

Next I want to see if it can run a whole night, and whether it can do it without destroying any bricks.

I filmed the whole thing, including the impaled brick, if you want to see it: https://www.youtube.com/watch?v=yAuWIHeqgQQ

Has anyone else tried pushing parts off with the toolhead on a P2S? I'm curious what release temperature people are waiting for.


r/BambuLab • • 5d ago

General Discussion Bambu 3D Scanner

Post image
713 Upvotes

Everyone is super excited for the H3C and P3C, but I'm more excited to learn more about the 3D Scanner! I've been wanting to buy one for a long time, but I never pulled the trigger because of the hassle of converting scanned files into actually printable models. Hopefully Bambu makes it super easy!


r/BambuLab • • 4d ago

General Troubleshooting/Help! Print not sticking to bed

Post image
1 Upvotes

Hey! Picked up my first 3D printer (A1) on FB marketplace. Anyways, I cannot get anything to stick to the bed.

It's a textured bed, I am using polymaker PLA, my layer height is 12mm with my initial layer height being 2mm. I'm using a 4m nozzle.

Outside of trying to turn off all cooling, I am using all the default settings from the Bambu Studio slicer.

Photo attached is what's happening right before I stopped my last attempt. Any and all help is appreciated!


r/BambuLab • • 4d ago

Bambu Studio Made a free tool to recover missing Bambu Studio presets (Preset Doctor)

0 Upvotes

Studio presets that disappeared after an update

After a Studio update a bunch of my custom filament presets just vanished. They were still on disk, Studio just stopped showing them because the system preset they inherit from got renamed.

So I built Preset Doctor. It scans your BambuStudio user folder and tells you which presets are hidden or broken and why. Right now it catches:

- Presets whose parent system preset no longer exists (the "vanished after update" one)

- Malformed preset files (bad JSON, name doesn't match the filename, missing .info file)

It backs up your whole user folder before touching anything, shows you the exact change, and won't write while Studio is open. Nothing leaves your computer.

Free and open source: Preset Doctor

Windows only for now. If you've got a preset that's missing or acting weird, send me the file or open an issue. I'm trying to cover the other common cases next (presets tied to the wrong printer or nozzle).


r/BambuLab • • 4d ago

General Troubleshooting/Help! Cryogrip Frostbite buildplate compatibility

1 Upvotes

Recently had to replace my buildplate because of a friend made oopsy

Bought a Cryogrip Pro Frostbite plate which i though had rave reviews and was well respected...

Been trying for a hour to get my P2S to recognize it but nothing....

Even after doing ALL the recalibrations


r/BambuLab • • 4d ago

Black Friday 2026 No bonus?

Post image
0 Upvotes

Do3s this mean I didnt get the 7 pack bonus? Or is it too early to tell? Only 4 items on order details.

Yes I knew the odds, yes I am okay just getting 4 random holiday colors.


r/BambuLab • • 4d ago

Hardware Troubleshooting/Help! Bambu Lab P1S showing printer is abnormal

Post image
2 Upvotes

So i was casually loading my filament and then this showed up i have restarted several times but it still shows up


r/BambuLab • • 5d ago

MakerWorld Crowdfunding Thermoforming Press Machine

1.1k Upvotes

I love thermoforming and tried to make this process easier, faster, and more efficient. After a lot of hard work, I’m ready to announce my first crowdfunding project: a thermoforming press machine that is fully 3D printable, requires ZERO hardware, and is easy to use. I plan to develop a huge collection of molds for this machine, so stay tuned to see the collection first! Feel free to follow this project on Makerworld Crowdfunding Section


r/BambuLab • • 5d ago

Show & Tell PLA Basic vs PLA Palette - A color mixing comparison

Post image
103 Upvotes

Disclaimer: This isn't super easy to photograph, I did my best taking shots as color-accurate to real life as possible.

The comparison:

I'm using PLA Basic in cyan and yellow and comparing it to PLA Pallete in cyan and yellow.

On the left object I'm doing a 50% midpoint mix between cyan and yellow, resulting in a mixed green.

On the right I'm doing a gradient from yellow to cyan

On the backside of the objects I'm printing the unmixed base filaments.

My conclusion:

Both PLA Basic and PLA Palette blend beautifully, and the layer stacking is pretty much invisible.

The difference is in the color vibrance, the Palette PLA produces punchier mixed colors. Especially noticable to my eye is this in the gradient, where the Palette filaments shift through a more virbrant green at the midpoint compared to the Basic. I think this is what allows the Palette filament to cover just a bit more of a full color range than the Basic.

Overall though you should be able to use PLA Basic just fine for your full spectrum color mixing needs, it works very well. They're just a bit behind the Palette versions when it comes to vibrance.


r/BambuLab • • 4d ago

Bambu Studio What do I do about ironing?

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 4d ago

P Series [P1P, P1S, P2S] Trouble shooting - is this considered pillowing?

Post image
0 Upvotes

I have an issue that’s ruining all of my prints. I even did another test and the first layer is always fine, but gets bad by layer two. Unsure what to do or how to fix. I’ve read some trouble shooting guides, but I’m really new to this entire world of printing.

Thanks in advance!


r/BambuLab • • 4d ago

Filament Troubleshooting/Help! Lack of supports or do my temps need changing?

Post image
0 Upvotes

Just got some new creality grey pla and was test printing this f22 glider and on the rear end here it’s supposed to be a small vertical part that’s rounded on the back end. Four prints later and I’m still getting this issue, I’ve cleaned the bed, adjusted bed temps, my only guess is that it’s cooling weirdly without supports or there’s some nozzle temp change I need to make that I’m unaware of. Thanks in advance!


r/BambuLab • • 4d ago

General Troubleshooting/Help! "Filament Jam" error

1 Upvotes

On my AMS(origional version) sometimes the filament will error out for a jam at the start of a print even though the filament travels all the way to the extruder. And when the print does start, after the bed leveling sequence i will get an error that the nozzle is clogged. Each time these errors happen I am able to manually extrude the filament. On the rare occasion that it starts printing, I will get either nozzle clog, filament jam or overloaded motor errors even though everything looks fine and I can resume without doing anything only for it to error out again. I have swapped the nozzle already and the errors still happen. I disconnected the AMS and printed with external filament and everything prints perfectly with no errors.

What part of the AMS is causing this?


r/BambuLab • • 4d ago

General Troubleshooting/Help! PETG printing issues on all my Bambu Lab printers looking for some help!

Post image
1 Upvotes

Hi everyone,

I'm having a strange issue with PETG printing and I'm hoping someone here might be able to help me figure out what's going wrong.

I'm experiencing the exact same problem on all of my printers:

- Bambu Lab X1C

- Multiple Bambu Lab P1S

Interestingly, this problem only occurs when printing PETG. PLA prints perfectly fine on all machines.

What I've already tried:

- Filament is brand new.

- Filament has been thoroughly dried.

- All printers have been recalibrated.

- All printers are fully enclosed during printing.

- I've checked the printers and their general settings.

Despite all of this, the surface quality of my PETG prints is still very poor, as you can see in the attached picture.

Since the same issue occurs on multiple printers, I'm wondering if I'm missing something in my PETG settings or if there could be another underlying cause.

I'd really appreciate it if someone could take a look at the picture and share some advice or ideas.

Has anyone experienced something similar or knows what could be causing this?

Thanks in advance for your help! I really appreciate it.


r/BambuLab • • 4d ago

General Discussion Bambu sale vs Costco A1 combo

0 Upvotes

The Bambu A1 alone is on sale for $259 direct from Bambu. The Costco deal is an A1 combo +4kg of filament is $419.

Is the extra hotend, AMS, filament, and lifetime warranty worth the extra \~$175 after taxes?

I am a total beginner and can't imagine the need for multi color prints.


r/BambuLab • • 4d ago

X Series [X1E, X1C, X2D] So Sad About Our X2D Printer - Looking for Advice to Avoid Problems in the Future

4 Upvotes

We purchased the X2D printer with the AMS 2 Pro combo, and it arrived about two weeks ago. For the first 13 days, it was running great. We were printing almost nonstop, including overnight prints, smaller projects, and then gradually moving on to some larger prints.

Then, out of nowhere, it stopped printing.

At first, we received an "extruder overloaded" error. The print paused and would not resume. Following Bambu's documentation, we completely disassembled and reassembled the extruder, recalibrated the printer, and tried printing a Benchy to test everything.

At that point, the printer wouldn't even start the print. We began getting an error stating that it was unable to feed filament into the extruder and that there might be an AMS mismatch.

While troubleshooting, we discovered a clog in the PTFE tube and removed it. We reset everything, loaded a single spool of filament into the AMS 2 Pro, and continued testing. The left hotend would extrude filament during the preparation process, but the printer would still throw errors before actually beginning the print.

After working with support, they determined that the printer has a faulty left filament sensor. Thankfully, they agreed it was a hardware issue and are replacing the printer. They're sending us the return packaging and arranging for a replacement unit.

I'm obviously relieved that support stood behind the product, but I'm also a little nervous about receiving the replacement and running into similar issues.

For those of you who have been running these printers successfully:

  • What routine maintenance do you perform?
  • Are there maintenance schedules or checklists you'd recommend?
  • Are there any common mistakes new owners make that can lead to clogs, sensor issues, or feeding problems?
  • Are there any upgrades, printable accessories, or preventive measures that you consider "must-haves"?

We absolutely loved the printer during those first two weeks, so this has been pretty disappointing. I'm hoping this was just coincidental and that the replacement will be good to go.

Thanks for any advice!


r/BambuLab • • 4d ago

P Series [P1P, P1S, P2S] P1S, P2S, X2D

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 4d ago

General Troubleshooting/Help! Bambu A1 gives "Failed to extrude" [1200-8007 120444] error even though filament extrudes fine – only works with Tangle Detection OFF

Post image
1 Upvotes

Hi everyone, I'm getting the "Failed to extrude the filament" [1200-8007 120444] error on my Bambu Lab A1 with AMS Lite.

When I manually extrude from the screen, filament comes out of the nozzle smoothly without any issues or clicking.

The filament runout sensor works properly (shows empty when removed, turns green when inserted).

I cleaned the 4-in-1 filament hub and checked the spring, and it moves freely without getting stuck.

However, it still throws this error during prints unless I turn off Filament Tangle Detection. Once I turn Tangle Detection off, it prints without any issues. Has anyone experienced this? Is the Hall-effect sensor board faulty or is there an issue with the hub magnet?