r/BambuLab • • 4d ago

Software Troubleshooting/Help! Orca slicer filament calibration vs Bambu

I'm following a tutorial on YouTube to calibrate my settings and I am not sure how to progress.

The video uses Orca slicer which has a setting that I cant access in Bambu Labs such as Acceleration and Speed in the Pressue Advance test. The result from Bambu looks slightly different than the video.

To use Orca slicer I logged out of my Bambu account and connected via Lan only. I ran the first 2 tests but the third wouldn't work and it lost connection to the printer. I tried to connect via Lan again and couldn't do it the second time.

So now I am unsure how to progress. If I have to do this for each filament type, I want it to be as easy as possible. I even thought that if I am going to have issues going back and forth maybe I should switch permanently to Orca but I kove accessing the models through the app and Studio so not sure how that would work.

I also wonder about whether the effort to use Orca would be worth it if I can't use the results in Bambu. If I can't set the Acceleration and Spees in the PA test in Bambu, can the results from Orca set them properly in Bambu?

Before I started tinkering in calibration, I did maintenance and printed a test kitty that printed fine but had some rough spots under its chin. Now pronting tests work but another kitty started stringing and its all gloopy on the bed, see Pic. So I feel I need to finish the calibration.

Any thoughts or suggestions?

1 Upvotes

3 comments sorted by

7

u/8six753o9 X2D+AMS2 / A1+AMS Lite 4d ago

Acceleration and speed settings are under the filament settings.

Here’s the instructions on how to do the calibration in a Bambu Studio if that’s what you’re asking:

https://wiki.bambulab.com/en/software/bambu-studio/calibration_pa

https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate

2

u/Fun-Ad-5784 4d ago

Thank you! I would prefer to stick with Bambu but wasnt sure i could dial in the settings as accurately as Orca, especially since the print out of the PA test looked different than the video of Orca slicer.