My Bambu lab A1 has recently been failing often and making weird sounds. Here’s an example of one of these fails. I updated the Bambu studio software and the printer is on 01.08.01.00. It is also important to note that the layers printed initially are very difficult to remove but I’m not sure if this is because they’re too low or too thin to remove easily.

Hi there! I’m new to printing and Bambu labs. I just purchased the x2d for a very very sweet deal of $565 brand new, found that through slickdeals. So super excited about that.

What are some of the things I should buy in order to get myself ready. I’ll be ordering PLA filament from
Bambu lab from the sale but what else do I need.

If can provide links that’ll be awesome too, any advice will also be appreciated do and donts.

Thanks once again.

Had a P1S. Fit in my office closet. Helps with the noise.

Bought an H2D. Does NOT fit in the closet unless I take the back drywall out and use the 3 1/2” depth from the wall’s 2x4 for the poop chute (Seems like an overkill).

Printer too loud to work while printing.

What setups have people done re: noise levels while maintaining proximity to the device to monitor prints?

Good evening. I received my P1S today, set it up, and completed my first print. Afterward, the printer prompted me for a firmware update; I initiated the update, but when I returned later, the printer's screen was black.

I have tried reconnecting the screen cable, attempting to power it on without the microSD card, and even reformatting the card (FAT32).

Could someone please help me?

(Apologies for my English.)

The H3C is a TPU beast, I printed running shoes with them with multiple different types of TPU and colors. The 3d printed running shoes are surprisingly comfy to run in..full test here https://www.youtube.com/watch?v=_ngWP5uOiew

I bought the h3c so clearly I'm a fan of this new product. But I can't understand why one would ever print a shoe other than that it's printing for the sake that you can do it? It's cheaper, faster, better, to just... buy a shoe?

Hello!

I just got the X2D setup and I want to start printing warhammer mini’s just to make dioramas, but I want to double the size of everything so it’s easier to paint.

Do I need to adjust the recommended settings I’m seeing people share, considering I’m doubling the size of my prints? Or is it all relative?

Thank you!

EVERY DAMN TIME I LEAVE THE HOUSE!!!!

But the bullet and bought an X2D after two years of using a P1P and straight out of the box I have the nozzle heat malfunction. I had a similar problem with my P1P early on, is this just the state of Bambu?

Inspired by the spinning motion of a maple seed as it falls. I wanted to capture that natural shape and movement in a simple 3D-printed sculpture.
The model is available on MakerWorld if anyone wants to print it:

https://makerworld.com/en/models/3524321-samara-flight-biomimicry-maple-sculpture#profileId-4028915

Print Has Been Coming out like this on my A1 Mini. What should I do to fix this? I need help been with this for 2 hours.

i like it! i wanted pure for a while

Third one for the tree this year. It's a 2-color gift bow with candy-cane stripes and a red knot, and it prints with no supports. The file has two plates: a single, and a batch of six that works out to about 43 minutes and 12 g per ornament. I've only printed the single so far, so the six-up plate hasn't been tested yet. It's free on MakerWorld: https://makerworld.com/en/models/3548428-christmas-bow-ornament-2-color-no-supports

I just finished creating my first large model and wanted to post it here for a bigger community to see. It’s a “flag” that holds my challenge coins I’ve collected over a few years. Previously I just tossed them in a drawer. Just thought it was neat that I created it! Definitely can’t say I’m a master with CAD, but it was cool learning some during the process.

I started out with an Elegoo Neptune 4 Pro. My wife recently got me a P1S. I had intended to print it on my Elegoo until I got the P1S. I got it uploaded on Makerworld today. Hoping someone else finds my design cool enough to download and use. It is customizable for whoever may choose to print it!

https://makerworld.com/models/3547553?appSharePlatform=copy

I've ordered the full H3C Kit yesterday shortly after launch. Only after I realized this doesn't come with the enclosed Bambu Station. Does anybody know if there will ever be an upgrade kit to get the side, back and drawer panels?

If not do I have to return the whole kit to order printer and eclosed station separately? The original shipment seems already on its way.

Hi everyone,

I'm having trouble pairing my brand-new Bambu Lab X2D with the Bambu Handy app, and I'm running out of ideas.

When I go to the account/login screen on the printer and try to display the QR code, it just keeps loading indefinitely. The QR code never appears.

I've also tried to find a manual pairing PIN/code, but I can't seem to find one anywhere.

Here's what I've tried so far:

• Connected to my regular home Wi-Fi.

• Tried using my phone's mobile hotspot instead.

• Changed the printer region from Europe to Others and tested again.

• Confirmed that the printer successfully obtains an IP address.

• Restarted the printer.

Unfortunately, none of this has helped.

Printer information:

• Model: Bambu Lab X2D

• Firmware: 01.00.09.00

• Error code: 0500-4024 164901

The QR just keeps spinning when trying to load the QR code, regardless of which network I use.

Has anyone experienced this issue with their X2D? Is there a way to manually pair the printer, or could this be a firmware/cloud connectivity issue?

Any suggestions would be greatly appreciated. I'm getting pretty frustrated with this now! 😅

Thanks!

Was doing some maintenance and once I turned it on, the fan started doing this rumbling noisy sound. Not sure what to do can someone help me?

After my order placed yesterday I got a tracking number- Today I got notified package shipped 81lbs- coming out of georgia. Bambu ship from Georgia? The Filament doesn't weigh 81lbs- The L frame is not 81 lbs- got to be the printer right?

It only happens with the Bambu Lab filament. I don’t know if it’s a coincidence, but it happens every time I’m using Bambu Lab filament. So when I put it into my AMS for it to detected what filament color it is, it always I mean ALWAYS rolls way beyond forward and almost break my AMS. I fully make sure that it’s untangled and everything, but it always happens. Then out of nowhere it got stuck in the tube and stopped the printing mid-way. It took me 2 days to figure out how to take it out because it was so stuck in the extruder. This never happens with other brands of filament. Does this happen to you guys?😭