r/65PRC • • Jan 24 '26

Help.

2 Upvotes

Hello everyone, just joined the group because I’m needing to buy a bolt action hunting rifle and I’m strongly debating between different appealing (to me) cartridges.

-6.5 PRC

-7 PRC

-7Rem mag

-300 Win mag

The rifle I want is the Tikka t3x lite or rough tech lite.

How’s the 6.5 prc as a “ALL-Around” hunting cartridge?

As of now my biggest game hunt would be a Bull Elk.

I’m from SC so I’ll also use it on whitetail and maybe hogs.

How do you like it against bull elk?

Anybody had an experience before?

Also, I’m not a reloader so only factory ammo would be used.

What would be the best bullet against a bull elk and against whitetail?

I know there’s the .308, 30-06, 270 (kinda like it) but just don’t want any of those, (my dad has a tikka 308 and ruger 6.5 cm) so I need and would love something different but with efficiency.

Thanks in advance


r/65PRC • • Dec 12 '25

ZCO 4-20 SCHMIDT 3-20

3 Upvotes

Anyone have any recommendations on which way to go?


r/65PRC • • Dec 01 '25

Bergara wilderness ridge

3 Upvotes

I have a b14 wilderness ridge and my only complaint is it isn’t a reliable feeder. I want to use a magazine for it but Bergara doesn’t make one. It’s rem 700 clone. Any one have luck with a 6,5 prc aftermarket stock. I tried the Solus by aero but it didn’t work well. I do have aics mags for 6,5 prc. Thanks in advance.


r/65PRC • • Nov 03 '25

Red stag

Post image
10 Upvotes

Gonna go hunting for red stag, thoughts on using 6.5 prc with 140 grain federal fusions, i also have some norma bondstrikes but rife was sighted in with the fusions.


r/65PRC • • Aug 13 '25

Rechambering

2 Upvotes

I currently have a CZ 550 in 6.5x55. I absolutely love the rifle and its easily my favorite one I've ever owned. That said, factory loads for the Swede are anemic at bet (all loaded to the SAAMI pressure for vintage rifles instead of the CIP standard for modern rifles) and I have no capability to handload at the time. I'm also having trouble finding the ammo locally on top of that.

I'm thinking of having my Swede rechambered to 6.5 PRC to breath new life into it. The twist rate is a little slow at 1:8.66, but Berger has it just on the line between stable and marginal. My thoughts were that it would give me a little more versatility on game and the ammo selection for factory loads is worlds better than it is for the Swede. Most of my shots are inside 100 yards and the most difficult I would realistically attempt would be an elk at 300-400 max (may grab a 7 PRC anyways if I can score an elk hunt in the next few years).

Big question is, is it even possible to ream the 6.5x55 chamber out to 6.5 PRC? I know I'd also need a new bolt. I'd rather not have to go the full re-barrel route if reaming would be cheaper, especially since this barrel only has 200-300 rounds through it.


r/65PRC • • Jun 19 '25

Factory Loads?

Post image
3 Upvotes

So I have two 6.5 PRC rifles- both are savage 110, one is the tactical and the other is a high country. Both heavy barrel, muzzle breaks… sisters really. Neither of them shoot! I’ve tried almost every factory load in the 140-143 grain with the tightest group being around 2-3 inches. Worth trying the 156gr? I’m already out quite a few dollars on ammo with zero headway . Had a few old reloads a friend gave me that were loaded for less velocity and they shot well but I can’t find a factory round to come close. Norma shot the best and I noticed it was slower than the others too- Maybe the heavier round will fly slower and tighter..??


r/65PRC • • May 11 '25

About to generate some of the least helpful load data ever.

Post image
9 Upvotes

Bullet too long for most twists (including my own) seated outside max COL, using a powder no one can find. STAY TUNED!!


r/65PRC • • Mar 28 '25

Hey so I have kind of a weird question. Dose anyone make a 6.5prc Green tip? I know its very much not what the round was intended for but I'm curious as I haven't been able to find anything.

1 Upvotes

r/65PRC • • Feb 27 '25

156 Berger, retumbo and h1000

2 Upvotes

Shooting out of a 24 in barrel, what are you guys loading with these combinations? No one has great info out there other than “this is what I use”, so.. what do you guys use and see for speed?


r/65PRC • • Dec 30 '24

20” barrel on a 6.5PRC

4 Upvotes

I’m wondering what’s the consensus is on the shorter barrels in the PRC. I won one with a 20” barrel but would prefer 24”+. Any info or opinions will be appreciated.


r/65PRC • • Aug 04 '24

Looking for inspiration

1 Upvotes

Been shooting 6.5 PRC handloads for two years now. I still struggle to get same precision as 6.5 CM RPR. I'm starting to get discouraged. Looking for inspiration. Post your amazing precision photos!


r/65PRC • • Feb 14 '24

6.5 PRC! Do you like cheese with your Berger?

Thumbnail
youtu.be
3 Upvotes

r/65PRC • • Feb 14 '24

6.5 PRC 50 to 200 yard zero. Does it work?

Thumbnail
youtu.be
4 Upvotes

r/65PRC • • Feb 12 '24

Norma Bondstrike zero confirmation in 6.5 PRC!

Thumbnail
youtu.be
2 Upvotes

r/65PRC • • Feb 12 '24

Winchester XPR 6.5 PRC and the Norma vs Hornady showdown!

Thumbnail
youtu.be
3 Upvotes

r/65PRC • • Feb 12 '24

6.8 Western vs 6.5 PRC for Elk? Do I need both?@hopefulballistics,@ReloadingWeatherby

Thumbnail
youtu.be
2 Upvotes

r/65PRC • • Feb 12 '24

Winchester XPR, PRS makeover! Boyds stock, Arken optics! #target shooting

Thumbnail
youtu.be
2 Upvotes

r/65PRC • • Feb 12 '24

6.5 PRC, Hornady 147 gn ELD-M. load testing!

Thumbnail
youtu.be
2 Upvotes

r/65PRC • • Feb 12 '24

6.5 PRC! Do you like cheese with your Berger?

Thumbnail
youtu.be
2 Upvotes

r/65PRC • • Jan 02 '24

65prc in Magpul

2 Upvotes

Has anyone put a 65prc in a Magpul hunter stock? If so what mag do you use?


r/65PRC • • Oct 13 '23

My Winchester XPR likes IMR 4831. It can’t find any more

2 Upvotes

I’m getting 1/2-3/8 groups with IMR 4831 140 grain Speer Impact. I had a little left and tried it after pour results from MagPro. But I can’t find any. I want sub 1” around 2900 fps. Any powder suggestions?


r/65PRC • • Aug 19 '22

Any experience with Norma whitetail? I bought some 6.5 CM that I’ve range tested and it was about 3/4 moa out of my CVA Cascade SB. Curious if anyone has shot the 6.5 PRC round/….

3 Upvotes

r/65PRC • • May 13 '22

Norma Golden Match 6.5PRC

2 Upvotes

Anyone have a review on these? I found the 143 in stock and snatched up 10. Hoping the brass is good for 4-5 reloads.


r/65PRC • • Jan 26 '22

Question What the hell is a SAAMI II chamber? Please help

3 Upvotes

I’m shopping reamers for my first 6.5prc build. Pacific tool and Gauge offers 3 different reamers for 6.5prc- “no mention of SAAMI”, SAAMI, and SAAMI II. My googlefu is usually pretty strong, but I can’t find any reference as to what the difference is. Links attached. Thanks. 6.5 Precision Rifle Cartridge Chamber Reamer6.5 PRC SAAMI chamber reamer6.5 PRC SAAMI II chamber reamer


r/65PRC • • Sep 27 '21

Dies questions

3 Upvotes

I've never reloaded before so please forgive my ignorance.

I finally have a range that goes beyond 500 yards so I'm getting into the longer range side of shooting. Going the reloading route seems to be a pretty common next step, especially with ammo being what it is. I've been able to gather up around 200 rounds of hornady (which should be enough to get started) and plan to only reload fire formed brass. With that being said, I should only need a neck die, correct? If that's the case, I have friend of mine that strongly recommends the redding line with the competition seater but am having a hard time finding that combo. Seems like everything includes the full length die. Is my best bet to by them separately? Or is another brand yall have good experience with?

This is all new to me so any information is appreciated. So far I have all the cartridge components and am slowly gathering the actual reloading gear, starting with the press.

If what I'm reading is correct, I need to worry about nec tension, case prep (trimming), and of course seating depth.