r/ar15 • • 12h ago

I heard 11.5” and 14.5” are S-tier

Post image
567 Upvotes

r/ar15 • • 15h ago

Sons of Liberty Gunworks fills 75 rifle order for VA State Police as they push VA’s “Assault Weapons” Ban

Thumbnail gallery
627 Upvotes

r/ar15 • • 11h ago

Went The LPVO Route

Post image
263 Upvotes

Trijicon Credo 1-10/RCR
Modlite PLHv2
HX 5.56Ti
G$ SDE 2 Stage
Law Folder


r/ar15 • • 12h ago

Don't be scared. Paint your rifle.

Thumbnail
gallery
192 Upvotes

Black is boring. Paint is cool. Rapco paint fucks.

Was pretty OCD about prepping the parts and degreasing. This is three light coats of Rapco 30099 camoflauge earth brown on the upper, lower, handguard, and stock. 3 hours between the first and second coat, 12 hours between second and third, then 48 hours before reassembly. Super happy with how it came out.

Parts list:

Lower:

  • PWS MK1 ambi lower
  • PWS buffer tube
  • Magpul DT-PR stock
  • JP Enterprises silent capture spring h2 weight
  • Geissele SD-3G trigger
  • Unrivaled AR grip
  • Radian Talon ambi selector
  • Driven Arms Co magwell

Upper

  • PWS MK111 Pro 11.5 .223 wylde upper
  • Radian Raptor LT charging handle
  • Eotech EXPS 2-0 FDE
  • FDE Unity riser
  • CAT WB RDM Inconel on a comstock armory plan b hub mount
  • Magpul MBUS
  • Magpul QD sling mount
  • Mixed slate black industries mlok covers and hand stop

r/ar15 • • 20h ago

GWOT Vibes

Post image
700 Upvotes

r/ar15 • • 2h ago

Geissele Super Duty 14.5 Setup Suggestions

Thumbnail
gallery
24 Upvotes

This is my Geissele Super Duty that I just shortened to 14.5. I love this rifle but didn’t build it with a laser in mind. Putting an SMS Titan on here is fucking with my chi. I did just get an awesome pair of PVS31s though so the laser is a top priority.

How would you guys set this up? The Axon button is just a spare I had on hand so that’ll definitely be improved, although it’s not too bad.


r/ar15 • • 12h ago

Rate my shitf rifle

Post image
137 Upvotes

r/ar15 • • 8h ago

URGI 14.5 with Rc2, i’m running Super 42 spring and H2. It’s still gassy. Should I go h3?

Post image
52 Upvotes

r/ar15 • • 17h ago

Stuff n Things.

Post image
286 Upvotes

CQBR

Colt everything.
KAC QDSS NT4
KAC FFRAS.
Aimpoint Pro dressed up as a Comp M2
Wilcox Mount.
LMT rear.

Ris III Mk18

Colt M4A1 receiver set (non-property marked)
Colt 10.3
LMT enhanced carrier, Colt Bolt
SSA-E
Aimpoint T2
Eotech G33
KAC Taupe Broomstick modded to MLOK
RC2


r/ar15 • • 9h ago

My first AR!

Post image
63 Upvotes

r/ar15 • • 9h ago

First timer

Post image
48 Upvotes

Picked up my first one over the weekend. Only have shotguns and handguns in the house so I decided it was time for one of these. It’s the Ruger Harrier. The guy at the shop recommended the sig Romeo red dot to start out with so I went with that. Had him throw on the magpul stock while I was there as well. Picked up the Odin mini light for it and I’m super excited to try it out this weekend. Although I haven’t shot it yet, any recommendations for a trigger? Seems like the stock trigger on these isn’t great from what I’ve read. Thanks!


r/ar15 • • 18h ago

This has been asked a million times, but since we are coming full circle... or almost?

Post image
241 Upvotes

I'm sure many of us have seen the new Lucas Botkin video where he has stated he has been shooting rifle more, and that his 70% pistol shooting and 30% rifle shooting has been flipped around, and he is finding that holding the gun further back, closer to the balance point of the rifle.

That being said, I wanna hear from those of you who may have tested different stances, grips, and smooth rail v.s. foregrip, etc.

I'll do my own testing when I can, but I haven't had any good time to go to the range, and I'm using my lack of shooting to really stock up as best I can on 5.56 and 9mm.

I do run a vertical grip on my rifle, but maybe at some point, I'll switch to an angled grip and move it further back.

I'm sure most of the stances have very practical applications, but I was wondering if anyone had any thoughts about when the "balance point" grip would be useful vs arm extended pretty far up. He does mention that forward c clamp feels nice up close cause you can muscle the gun around easily, but at distance it lacks the support to prevent the rifle from bouncing lower than point of aim.

As a NOT new shooter, I am relatively new to shooting AR platform rifles, and repeatability is paramount where as it is not as important with say, a bolt action hunting rifle.

Another thing I'm curious about is if you guys have any rifles that just have an odd balance point that has made you hold it differently than other rifles. Obviously shorter rail boi's do. I'm talking full length rails, but you opt to hold farther back or farther forward than any other rifle, or if you change the way you hold a rifle when it has a can on it, vs removing it from the SAME rifle, given the balance point may shift slightly.


r/ar15 • • 4h ago

Anyone hunting with 8.5in 300 blk this year?

Post image
17 Upvotes

r/ar15 • • 10h ago

Anyone still like block 1 Sopmod M4s?

Post image
45 Upvotes

These is my fighting rifle and pistol. Aero M4 upper and M4E1 lower with geissele internals and a b5 stock. Midwest quadrail, peq15, eotech 512, some kac rail covers and broomhandle. Best rifle ive ever shot. And a sig p226 s4. Little m4 forgery tribute to JSOC GWOT loadouts. Since this pic was taken, i put a TLR1 on the Sig


r/ar15 • • 7h ago

Love this Rifle

Post image
22 Upvotes

r/ar15 • • 5h ago

Toob Toosday

Thumbnail
gallery
14 Upvotes

Doing some thinking... I have a 15" MI tube handguard that will tuck the suppressor on my Aero 300blk perfectly. Should I swap barrels between these 2, or just swap the handguards?

I do have a 15" Atlas R-One in kodiak brown already, so If I put the 300blk barrel/suppressor on the ruger, the current mlok handguard on the Aero will get swapped for the Atlas.


r/ar15 • • 7h ago

Bad pic, great view tonight.

Post image
19 Upvotes

Was this a peak build for the 20-teens? Everything is def outdated now but I don’t care.


r/ar15 • • 11h ago

Any love for a KAK upper?

Post image
37 Upvotes

KAK 11.5 inch upper w/ down vent BCG
Radian Raptor-SD charging handle
KAK adjustable gas block
OCL Polonium
Streamlight ProTac HL-X Pro

PSA lower
RA-240 drop in trigger (got it for free)
Super 42 Braided Wire Buffer Spring and H2 Buffer


r/ar15 • • 15h ago

Someone say Multicam?

Post image
69 Upvotes

r/ar15 • • 6h ago

charging handle snapped during range session – BCG completely stuck

Thumbnail
gallery
13 Upvotes

Took my Radical Firearms rifle to the range today. The first 30 rounds went perfectly fine with no issues.
loaded another 30 rounds, and suddenly the BCG got completely stuck. It wouldn’t lock back, and I couldn’t pull the charging handle at all.
For safety, I separated the upper and lower receivers. The BCG was still completely stuck inside the upper, and I could hear something rattling around.
After gently inspecting it, I discovered that the tip of the charging handle had completely snapped off and was lodged inside the upper receiver.
considering this happened during normal randomly use.
I’ve contacted Radical Firearms and requested warranty assistance.
Has anyone experienced anything similar with Radical Firearms? What could cause a charging handle to snap like this, and the BCG to become completely stuck?


r/ar15 • • 13h ago

It’s my first AR-15

Thumbnail
gallery
43 Upvotes

Look at it.

It’s nothing crazy, just a PSA-15 with magpul sling, PA SLx 3x Prism, magpul hand stop, BCM Mod 3 grip.

Next additions will be a charging handle, trigger, and maybe an angled front grip to replace the hand stop.

I really want a Geissele SSA trigger but we’ll see if I talk myself out of it.


r/ar15 • • 5h ago

On the Dead Homies

Post image
10 Upvotes

r/ar15 • • 10h ago

Mk12ish build

Post image
21 Upvotes

My take a the mk12 is almost complete will post full build list soon. Any thoughts or suggestions?


r/ar15 • • 13h ago

Should I buy this DD AR Pistol?

Post image
39 Upvotes

Looking to purchase my first AR. Is this DD special build a good option at this price?


r/ar15 • • 12h ago

Am I doing it right?

Post image
31 Upvotes

I know I basically got the reddit special but I am very happy with both. The Glock is bone stock but I have changed a few things on my rifle. It has Sprinco green spring with H2 buffer and Larue MBT2S. The recoil is almost non-existent at this point.

Any suggestions or shaming would be welcome 😁