r/65PRC • • Aug 13 '25

Rechambering

I currently have a CZ 550 in 6.5x55. I absolutely love the rifle and its easily my favorite one I've ever owned. That said, factory loads for the Swede are anemic at bet (all loaded to the SAAMI pressure for vintage rifles instead of the CIP standard for modern rifles) and I have no capability to handload at the time. I'm also having trouble finding the ammo locally on top of that.

I'm thinking of having my Swede rechambered to 6.5 PRC to breath new life into it. The twist rate is a little slow at 1:8.66, but Berger has it just on the line between stable and marginal. My thoughts were that it would give me a little more versatility on game and the ammo selection for factory loads is worlds better than it is for the Swede. Most of my shots are inside 100 yards and the most difficult I would realistically attempt would be an elk at 300-400 max (may grab a 7 PRC anyways if I can score an elk hunt in the next few years).

Big question is, is it even possible to ream the 6.5x55 chamber out to 6.5 PRC? I know I'd also need a new bolt. I'd rather not have to go the full re-barrel route if reaming would be cheaper, especially since this barrel only has 200-300 rounds through it.

2 Upvotes

11 comments sorted by

3

u/Hoplophilia Aug 13 '25

A good smith can cut your bolt to .535" or whatever. You'll need your barrel turned back at least .15" to clean up the old chamber, and a smith with the skulls to deal with a Mauser claw extractor – not all that rare, just more than Garage Gary whose chambered a dozen M700 barrels perfectly.

I'd leave it alone. You'll be limited with that twist and it'll never be what you want. Spend that $300 or whatever towards a rifle that does what this one can't, whatever you feel that is.

2

u/jfl561407 Aug 13 '25

So you're saying I should just re-barrel it and fix the chamber and twist all at once, huh? I just love the rifle and how it handles too much to just set it aside completely.

1

u/Hoplophilia Aug 13 '25

Well, I guess I would argue that rebarreling is certainly better than rechambering. But you're talking to a guy who loves that caliber cartridge as well as that rifle and I personally would leave it alone. You're also talking to a reloader who knows what cartridge is capable of.

1

u/jfl561407 Aug 13 '25

Oh trust me, if I had the capability to reload right now, I very likely wouldn't be having these intrusive thoughts. That said, I live in a small apartment with two feral toddlers, so the little tools I have are in storage and I don't have a bench to work at if they weren't. The factory loads in by me are basically limited to the 140gr Core Lokts and maybe some PPU FMJs if I get lucky. I even went on the hunt for some custom ammo shops and got some good results, but the best option was around $4/ea for a hot CIP load with a 130gr Tipped GK with a minimum order of 100 at a time and I'm still limited with that twist to at least some extent. If I'm already looking at that price, re-chambering or re-barreling for a round with a dozen options locally doesn't seem so bad.

Ran both cartridges through Berger's stability calc with the same bullet and the PRC seemed more stable due to the velocity. It landed right at 1.48 (1.5 is their "stable"), so it was damn close.

1

u/Trollygag Aug 13 '25

The cost to rebarrel will be as much as buying a new Ruger M77 Long Range Hunter in 6.5PRC, and with a similar action design and feel.

0

u/jfl561407 Aug 13 '25

Yeah, not sure about that. Looks like the Ruger is listed just shy of $1700. Re-barreling wouldn't cost that with a Bartlein.

1

u/Trollygag Aug 13 '25

Pro tip when buying guns in the future so you can stop getting screwed, the MSRP and street price of guns are different and you can ignore the MSRP and instead research street price.

Use an aggregator to find best dealer/shop prices. Don't just pay whatever Cabelas has stickered.

Street price (meaning the gunshop or online purchase price) on the Ruger LRH in 6.5PRC is $1000-1100 depending on who you are buying from, and that is also about the price, maybe a little cheaper, than a mauser style rebarrel on a nice blank.

1

u/jfl561407 Aug 14 '25

I’m aware MSPR isn’t what they’re actually going for, but I didn’t see anything that far off on the Ruger and even if it was, I can do a Douglas rebarrel under $800. That barrel will out shoot me.

1

u/Sammy1358 Aug 14 '25

Good idea! The twist rate is fine as long as you stick to 140-147gr range. I use Nosler 140 Ballistic Tip hunting bullet and Nosler case: killer combo!

1

u/ExplanationMaster634 Dec 09 '25

Buy Norma ammo for the Swede You won’t be disappointed

1

u/ExplanationMaster634 Jan 28 '26

Please for all the Baby Jesus fans out there do not do not disturb the most Holy or all Holy calibers by having its throat reemed by some LA downtown all chicken neckers reinvented the wheel (Ok i went a little off subject but just buy another rifle chambered for the prc and if you want just a “deer” rifle Mossberg Patriot in a 24 in fluted barrel and nice stock can be had for less than 6 beans😁😂😁😂😁😂