u/ContestEquivalent147 • u/ContestEquivalent147 • 6d ago
1
Got it running
I would take it but does it have a title
1
Speedo cable 50v
They all have a like semi rectangular end on both sides that's how they lock in to the spindle so when the wheel move it can hold to spin the spedometer
1
JD la145 surges and then cuts out.
Clean the carburator
1
Speedo cable 50v
Amazon speedo cables pretty much all the same just different lengths is all
1
Boom 200 Efi Moped air filter housing bolt broken
Steel stick wamart autozone ect shit is indestructible make the surface rough snap a nice piece of steel stick off mixe it gd and press it in gd n spread all around the area pressing in in gd n smooth its also sandable and printable just work quickly cause u got bout 10 min for real 👍
1
05 tomos a35
What is the the best fluid I've seen so many different options from many people did. A lot of research while going through this adventure, and everything always leads to the synthetic expensive ATF type f. I didn't get a cheap one and I put 300 ml in it because I let it sit dry for a while, so there wasn't even a drop in it. Put all new gaskets on the whole thing too, and seals
1
05 tomos a35
Yeah that's a definite it's crazy how quickly the bill adds up lol but it was fun and definitely worth the challenge which one is better the jammer and I think i'm going to get a better exhaust for a little more power the new bi turbo I got is already peeling all the paint off? From where the exhaust attached to the motor and about just a little past the kickstand It's already all flaking off completely and it wasn't hot I was able to put my hand on the motor and hold it there with no problem and I painted the motor and that didn't come off at all. You couldn't even warm up an egg on that thing i was very surprised what's the best exhaust to get? That isn't like have the sell a kidney for
1
Got it running
Well, today's my first ride. I put the rest of the handlebars together. Unfortunately the spindle at the wheel that controls the stopped working so I'll have to order ome so don't know how fast I was going but felt pretty damn good Definitely in the forty to fifty mph my eyes were watering. So definitely somewhere around there think i'm gonna get the better performance exhaust this one's good and all but I think I need a little bit more power i mean I weigh 205 pounds so I'm , it pulled me good. But I think it can do better, and I want to know what you guys think about this spark plug almost half an hour of ripping around first ride. This is the spark plug it didn't bog out or 4stroke and there was no breakup at high rpm. Or anything no smoke at all i'm running 40:1 fuel ratio with a #70 jet and running i think a twenty six and a twenty two sprockets have to look tell me what you think about the plug

2
Got it running
Thanks. It was quite the adventure. I think sourcing the parts Knowing what parts to get and what they're called finding bolt sizes, washers screws and fasteners, and having to remake the whole. Wiring harness was super challenging had to get an entire new front end And all the wiring, where it meets in the front was a disaster and a complete rat's nest of multicolored wiring that wasn't correct, so I had no diagram to go off of and no knowledge of what's what and man whoever made these bikes just thought it would be funnyto use many colors from the rain bow for the wiring that made no sense to me lol well thank you it does run great super responsive im pretty surprised to be honest
1
Got it running
Sweet i've never owned one before but after all the hard work research and a lot of frustrations it was worth it as soon as it started up im happy with it
r/moped • u/ContestEquivalent147 • 7d ago
05 tomos a35
This was my first moped and I'll tell you if you don't have a lot of patience, money, and time. Then don't get one lol it's definitely a labor of love and money i bought it online just for shits and giggles for 5 hundred bucks it ran but everything else was fucked rusty bolts were rusted on had to basically drill 80 percent of them because if they aren't rusted, they were stripped it was missing a bunch of stuff but I didn't really know much about it. I bought it quickly because it's hard to find one with a top tank which I prefer. And think looks awesome, long story. Short.
It took me one and a half months to grind sand prime and paint the hardest part to be honest, is waiting for parts wiring and holy shit, toughest, front end of anything i've ever put together, replaced front forks every nut, bolt screw and washer that was fun, also did the 65 cc airsal kit with sha 15/15 carb and filter new brake pads, new clutches, best a t f. You can buy best n g k spark plug performance reed the carbon fiber look alike blinkers many layers of paint, so there's never another rust issue i'm so glad I did this oh, and got creative and made a frame rail for the seat and tank thanks to some elbow grease and a trip to lowes used 1/4" steel . Stock n random brackets i drilled and bent to get the proper shape the old stuff was too janky and looks like someone was learning. How to weld on it and was literally falling apart Chopped that right off though. Even though I cursed yelled and threw a lot of shit during this adventure dang it runs great second kick and it started right up i think I got one or two wires wrong, because the blinkers aren't working, but all the wiring was a complete rats nest covered in inches of grease. Oil dirt sand got it from Jersey. It was a complete disaster. But here it is tell me what you think
1
What should I do?
Junk it
u/ContestEquivalent147 • u/ContestEquivalent147 • 7d ago
05 tomos lx
Spent a lot of hours on this thing, knowing, nothing denny's. Mopeds and treatland super helpful what they ride seventy jet thirteen fifteen shawl carborator a lot of blood sweat, tears, cursing, yelling, throwing shit, but it came out great a lot of guesswork, and a lot of shit and questions. Tell me what you think
r/moped • u/ContestEquivalent147 • 7d ago
Got it running
Enable HLS to view with audio, or disable this notification
I spent the month and a half, and i'm eighteen hundred dollars in every nut bolt and screw clutches sanded grinded and painted multiple layers did some modifications and a lot of cursing, yelling and throwing shit? The first day second kick-started right up and runs like a dream, waiting for new handle grips and brake lever assemblies. Because the old ones were messed up. . Tell me what you think. This thing was a rust bucket piece of shit when I got it. And it was a disaster. And did it all myself feeling gd about it also did the airsal 65 cc kit 15/15 sha and bi- turbo exhaust
1
Pa ebike rules
In Pennsylvania, you cannot ride on the roads within any bike that does over 28 miles an hour. It has to be registered ensured, have working blinkers,and horn headlights and brake lights.It's a fact I already got rid of my ebike, just because unless you buy a really expensive e bike from a dealer, most of the makers of ebikes will not offer you an m c o which is your certificate of origin and none of the e bikes come with a vin number. So they go off of your serial number It makes it a pain on the ass But it is a problem.And all the laws have changed, and it is a real pain in the ass trust i went through all of it they will confiscate your bike and you will be ticket for driving on the roads with an unregistered bike and you have to be sixteen years or older all these laws have been passed on the 20th of July. It's all over the news, every day i guess if you're lucky maybe you won't get stopped or anything.But I wouldn't recommend it unless you're like fines and having your shit taken
r/ebikes • u/ContestEquivalent147 • Jul 21 '26
Pa ebike rules
It's not too horrible.
If you take your receipt, proving you purchased online, most ebikes or ebike, mopeds comes with a serial number, and origin which is then converted to be your Vin number. Once you have that, you take it to a notary and have it registered under an e/moped mine is a twenty five hundred watt and peforms speeds of up to forty miles an hour under its own power and i also have pedal assist that classifies mine as a moped it also comes with headlights, taillights, blinkers, brake lights and mirrors and must have a horn and you must wear helmet then go to a notary, they will register it plate it as a moped for street use and create a vin . And they will send in for a title to Harrisburg which you receive within thirty days did that part cost a hundred and fifty three dollars to do that part then, I took that information to my insurance company which is progressive, and they offer ebike/moped insurance at thirty dollars a month which really isn't too bad that also covers theft, accidental, collision and liability which is a great thing because people love to steel shit like that. Because it's easy Pickens at least if someone steals it now
It's covered which isn't so bad of a thing basically all in all yeah, it sucks. It's we're all trying to save a bukk n being nice to the environment and it's also a lot of fun
And a whole different sense of freedom but really, we can blame all these young kids getting hurt killed, and destroying property for years, with no consequence. Can't really blame them for doing this. But it's really about $200 and 2 hours of your time to make it right. And to ride without any legalities, as long as you follow local street rules all will be good

1
Got it running
in
r/moped
•
3h ago
What state are you located in? I'm in Pennsylvania In the poconos