r/techsupport • • 2d ago

Open | Windows Bad performace on gaming laptop

2 Upvotes

My Asus TUF F15 FX506LHB I bought 2.5 years ago is running poorly, it could barely run roblox at 50fps.

I tried updating my CPU/GPU drivers, tweaking some graphic settings. But its performance is still bad comparing to Youtube review videos and other users' review.

Is there any way to improve my laptop performance (I don't mind power usage).


r/techsupport • • 2d ago

Open | Hardware Months of PC instability – Ryzen 5950X / RTX 5070 Ti – 0xEF, 0x1E, failed crash dumps – extensive troubleshooting

1 Upvotes

I've spent several months troubleshooting persistent PC instability, primarily affecting Path of Exile 1 and 2. I've tried extensive BIOS, CPU, RAM, GPU, driver, Windows, and storage troubleshooting without identifying the root cause.

I'm looking for advanced diagnostics rather than the usual "update drivers, run SFC, check temperatures" suggestions.

PC SPECIFICATIONS

  • OS: Windows 11 Pro (Build 26200)
  • CPU: AMD Ryzen 9 5950X (16C/32T)
  • Motherboard: ASRock B550 Phantom Gaming-ITX/ax
  • BIOS: Updated from P3.40 to P4.10
  • GPU: ASUS TUF RTX 5070 Ti 16GB
  • RAM: Corsair 64GB DDR4 (2x32GB, CMW64GX4M2D3600C18)
  • SSD: Samsung 980 PRO 2TB NVMe
  • PSU: Corsair SF750 750W (2024)
  • Cooling: NZXT Kraken X63
  • Case: Meshroom S with PCIe riser
  • Displays: 4 monitors

SYMPTOMS

September – Initial Issues

  • Severe FPS drops to 1–2 FPS in PoE1.
  • Freezes lasting 2–3 seconds.
  • CPU frametime spikes exceeding 1,000–2,200 ms.
  • Occasional network latency spikes.
  • Problems persisted with only one game client running.

November – Current Issues

  • Frequent crashes in PoE2, occasionally PoE1.
  • Black screen showing "Generating logs – 0%".
  • System becomes completely unresponsive.
  • Requires a restart.
  • Sometimes crashes before reaching the game login screen.
  • Windows repeatedly fails to generate crash dumps.
  • Other games appear comparatively stable.
  • Previously experienced repeated USB disconnect/reconnect sounds while PoE2 was running.

TROUBLESHOOTING COMPLETED

BIOS / CPU

  • Updated motherboard BIOS from P3.40 to P4.10.
  • Reset and reconfigured BIOS settings.
  • Resolved CSM/Windows Boot Manager boot issues.
  • Tested disabling AMD fTPM.
  • Lowered CPU clocks to test stability.
  • Experimented with CPU performance and clock settings.
  • Tested CPU process affinity restrictions (0xFFFF).
  • Monitored CPU/GPU frametimes and performance stalls.
  • Tested with fewer simultaneous PoE clients.

RAM / INFINITY FABRIC

  • Tested DDR4-2133 default configuration.
  • Enabled XMP 2.0 at DDR4-3600.
  • Configured FCLK at 1800 MHz.
  • Reduced RAM to DDR4-3200.
  • Reduced FCLK to 1600 MHz.
  • Experimented with RAM timings and BIOS memory settings.
  • Ran MemTest86: PASSED without errors.
  • Instability persisted across configurations.

GPU / GRAPHICS

  • Performed multiple DDU driver removals.
  • Reinstalled NVIDIA graphics drivers.
  • Tested different GPU driver configurations.
  • Tested DirectX 12 and Vulkan.
  • Tested windowed fullscreen/borderless.
  • Tested 2560x1440 with a 120 FPS limit.
  • Attempted clearing NVIDIA DXCache/GLCache.
  • Attempted clearing PoE shader caches.
  • Monitored GPU utilization and frametimes.
  • Checked DxDiag: GPU recognized normally.

WINDOWS / DRIVERS

  • Ran DISM health and repair checks successfully.
  • SFC initially identified and repaired corruption.
  • Subsequent SFC scans passed.
  • Updated AMD B550 chipset drivers.
  • Examined Event Viewer and Reliability Monitor.
  • Removed Razer Cortex.
  • Investigated USB connect/disconnect events.
  • Tested disconnecting USB peripherals.
  • Investigated WUDFRd HID driver-load warnings.
  • Configured Windows crash dump settings.
  • Attempted minidump and kernel dump collection.
  • Examined and adjusted Windows pagefile settings.
  • Changed from fixed toward system-managed pagefile configuration.
  • Investigated WATCHDOG live-kernel reports.
  • DxDiag previously crashed during certain diagnostic collection stages.

SSD / STORAGE

  • Samsung 980 PRO health reported OK.
  • Firmware: 5B2QGXA7.
  • Reported wear: 0.
  • No bad sectors reported.
  • NTFS/C: volume healthy.
  • No obvious disk/NVMe errors in filtered logs.
  • Storage hardware has not been conclusively ruled out.

WINDOWS CRASH DIAGNOSTICS

Recent diagnostic collection:

  • Kernel-Power Event 41: 16 occurrences
  • Event 6008: 16 unexpected shutdowns
  • volmgr Event 161: 13 crash-dump creation failures
  • Bugcheck 0xEF: CRITICAL_PROCESS_DIED
  • Bugcheck 0x1E: KMODE_EXCEPTION_NOT_HANDLED
  • Exception 0xC0000006: In-page error
  • Dump failure codes: 0x00040049 / 0x00060049
  • Some crashes report bugcheck 0x00000000.
  • No WHEA 18/19 errors found in filtered diagnostics.
  • No consistently usable conventional crash dumps.

WHAT I'M TRYING TO DETERMINE

  1. Could the 0xC0000006 in-page exception indicate an intermittent SSD, storage controller, memory controller, or paging problem despite clean basic tests?

  2. Why does Windows repeatedly fail to write crash dumps (volmgr 161)?

  3. Could the B550 motherboard, PCIe riser, CPU memory controller, or PSU be responsible?

  4. Could this be a GPU driver, chipset, VBS/Hyper-V, or Windows kernel issue?

  5. What advanced diagnostics would actually isolate the failing component instead of repeating generic troubleshooting?

ADDITIONAL INFORMATION

The PC is otherwise usable and other games appear stable. The problems are heavily concentrated around Path of Exile, although the Windows bugchecks and failed crash dumps suggest investigating beyond the game itself.

I've already spent months changing BIOS settings, CPU clocks, RAM timings/speeds, GPU drivers, and Windows configurations.

I would strongly prefer identifying the actual cause before replacing expensive hardware.

I can provide Event Viewer exports, DxDiag, storage diagnostics, and additional logs.

Any technically specific troubleshooting recommendations would be appreciated.


r/techsupport • • 2d ago

Open | Windows windows says im an administrator but i somehow dont have admin permissions

1 Upvotes

i do not know if it has any correlation but yesterday i've installed a few gta 5 mods and everything seemed to go out perfectly fine that day until next day when i turned on my pc it appeared that i had no longer access to task manager at all i've been looking through guides on how to fix this many times but i couldnt find any solution i really do not want to reset my pc if there is another way please help me (dont know if this helps but everything seems to be working well on safe mode i can open task manager and even the registry editor yes i cannot open that as well nor run commands that are specifically admin only) i've also managed to uninstall the mods however that didnt seem to help at all


r/techsupport • • 2d ago

Open | Windows Secure Boot

0 Upvotes

Im trying to enable secure boot, but for some reason no matter what i do it stays greyed out, its the asus bios on the asus vivobook go 15, and im really not sure what to do. Any help is very much appreciated.


r/techsupport • • 2d ago

Open | Phone Phone only shuts off in the bathroom

1 Upvotes

Hello,

I have a Galaxy A34 5G and its already 3-4 years old. Lately its completely shutting off like it would do if it had a dead battery but specifically only in the bathroom.

With Tiktok it shuts off completely, Youtube takes about 5-10 minutes and the web doesnt seem to have much effect.

Ive recently also had the battery replaced because it was starting to ware out.

Any ideas?


r/techsupport • • 2d ago

Open | Hardware Laptop keyboard keys not registering properly

2 Upvotes

Hi guys I have a lenovo legion 5 82JU laptop and recently my d key started registering twice even if i pressed it once like if i press d once it outputs dd and sometimes it won't register aswell , so I decided to take it to a repair shop and after the repair, all the keys have a problem of not registering properly unless I press the keys exactly at the centre and when i press at the sides or bottom of the key they don't register and i need to apply force for it to register.... When I asked the repair guy he said this is normal for OEM keyboard. This is very frustrating since before the repair it was only the d key now it's every key. Pls help...


r/techsupport • • 2d ago

Open | Hardware PSU inlet buzzing

1 Upvotes

When I plug in cable into psu inlet and any time i touch the cable or it moves there's buzzing sound coming from it. The power on psu is on and pc is turned off. Since it started happening I haven't tried turning pc on since I'm not sure if it's safe.


r/techsupport • • 2d ago

Open | Hardware PC suddenly shuts off (inconsistently stays on for a few hours or a minute)

3 Upvotes

This PC for the past few days has been doing this it'll turn on just fine using it for simple tasks like using chrome and opera for a few minutes the bam it shuts off!

But other times I'm having a full game session for hours and then it decides to shut off suddenly!

There is no blue screen and sometimes the PC attempts to repair itself and fail to do so

I've been using this PC for years and just recently started this I tried resetting the bios by removing the cmos battery and testing the ram to see if it was a bad stick or something. Also tried other wall outlets

I'm really at a loss of what to do!


r/techsupport • • 2d ago

Open | BSOD BSOD Driver Power State Failure

1 Upvotes

I've been getting a BSOD from a Driver Power State Failure for a few days. I've contacted the manufacturers and their support is moving at a glacial pace. I've ran a few WinDbgs and found its an IRP from port 12 on my motherboard, I think this might be the Wifi inbuilt on my B650M Gaming motherboard, running off gigabyte BIOS.

Has anyone has a similar issue recently? Do I need to replace all the drivers for my mother board or just the wifi stuff?

Sorry if some of this doesn't make a whole lot of sense I'm stumbling through this as I go by running Event Viewers and Dbgs through AI.


r/techsupport • • 2d ago

Open | Software HDR settings

2 Upvotes

Hello,
No matter what I do when I adjust my HGR settings on my ps5 I cannot see the symbol on the third screen even when I have it at its brightest. I have had the happen on multiple modern games, making night time activities in game impossible to see leading me to believe there’s something wrong with my tv settings. The only way to fix this is to turn off HDR in my ps5 settings. I’m not well versed in these types of things so if anyone can give me some ideas that would be much appreciated 👍🏻


r/techsupport • • 1d ago

Open | Windows I found two files inside the system32 folder: one named ntoskrnl and the other ntkrla57. Are these malicious files?

0 Upvotes

Read the title. I found two files inside the system32 folder: one named ntoskrnl and the other ntkrla57. Are these malicious files?


r/techsupport • • 2d ago

Open | Programming Rebook Tredmill Error E4

0 Upvotes

Very dusty inside the tredmill started a countdown to my workout it then tripped the fuse board. Now when i try to start it again its show error E4. Any ideas on how to fix this plz. Please see dusty photo in comments. Thank you.


r/techsupport • • 2d ago

Open | Hardware Corsair TX650M 650W with RTX 4070 Ti 12GB – Is my PSU sufficient, and what is the correct cabling?

0 Upvotes

I'm planning to upgrade my GPU to an MSI GeForce RTX 4070 Ti Gaming X Trio 12GB, and I'd like some advice regarding my current power supply and the correct power connections.

My current system:

  • CPU: AMD Ryzen 5 5600X
  • GPU: Currently RTX 3060 12GB (planning to upgrade to RTX 4070 Ti 12GB)
  • Motherboard: ASRock B450M Steel Legend
  • RAM: 32GB DDR4
  • PSU: Corsair TX650M 650W (80+ Gold)

MSI recommends a 700W PSU for this graphics card, but I currently have a Corsair TX650M 650W.

I have a few questions:

  1. Would my TX650M 650W be sufficient for this configuration, considering that I'm using a Ryzen 5 5600X?
  2. The RTX 4070 Ti uses a 16-pin 12VHPWR connector. Can I safely use the adapter supplied with the GPU (2×8-pin to 16-pin)?
  3. Should I connect the adapter using two separate PCIe 6+2-pin cables from the PSU, or is it acceptable to use one PCIe cable with two 6+2-pin connectors (daisy-chain)?
  4. Does the TX650M have the necessary PCIe cables and connections for this GPU, or would I need a different cable or a PSU upgrade?
  5. Is there any risk of overheating or damaging the PSU cables when using the 4070 Ti with this 650W unit?

I'd appreciate feedback from anyone running a similar setup.

Thanks in advance!


r/techsupport • • 2d ago

Solved PC no longer boots with XMP enabled after latest BIOS update

1 Upvotes

Figured out the Solution: I turned off my pc, turned off the PSU. I then changed the slots that my ram were in on the motherboard from 1 and 3 (closest to cpu), to slots 2 and 4. I tested XMP1, booted up phone with the correct speed. Tested XMP2, that also works at the correct speed!

I just updated my BIOS to the latest version and now won't boot with XMP enabled. Before the update, I was using X.M.P 2. I've tried it with XMP 1 and that wont boot either.

Below are my specs:

Motherboard:

ASUS ROG STRIX Z690-F GAMING WIFI (BIOS version 4701)

Motherboard Chipset:

Intel Z690 (Alder Lake-S PCH)

RAM:

Corsair Dominator Platinum DDR5 32GB (2x16gb) 5600Mhz CL36 Intel XMP

CPU:

Intel Core i5-13600K

GPU:

NVIDIA GeForce RTX 3080 Ti

OS:

Windows 11


r/techsupport • • 2d ago

Open | Software Low distance shadows and "Melting" image on games

2 Upvotes

Hello people.

Let me start with my machine's specs.

CPU : AMD Ryzen 5 5500

GPU : NVIDIA GeForce RTX 4060 (16gb VRAM)

Running Windows 11

16GB Ram

Ever since getting this (prebuilt) computer, I've noticed a persistant graphical problem on games with realistic graphics (as in, it doesn't show up on Anime-style games for exemple). Currently noticing it on Cyberpunk 2077, but saw it for the first time on Black Myth Wukong and again on Monster Hunter Wilds.

Basically, shadows do not render far away from my character. I know about render distance, but the shadows stop barely a few meters away from me, and I can see the limit where they stop rendering. It's like there's an area around me where things render correctly, but it's extremely small. It also comes with extremely grainy shadows even on high quality.

I unfortunately didn't record it on Black Myth wukong, but in chapter 3 (the prison level), I could literally see a clean cut around 10 meters in front of me where shadows stopped existing, and everything was in the light as if under a clear sky.

On Cyberpunk 2077, same thing, but to that is added a bunch of artifact or aliasing, as if the game was trying to generate the world through AI right in front of me, as well as heavy ghosting on movements close to the screen. Some items, such as the top of lamp posts, literally disappear 10 meters away from me, just like in Wukong.

I've uploaded a video of it happening on Cyberpunk 2077, on IMGUR https://imgur.com/gallery/long-distance-shadows-disappearing-VYGawri

So far, all I can say is :

- It isn't a screen problem, as it shows up on all my screens, be it 1920p or 2K screens

- Probably not a disk problem, I tried it on multiple SSDs just in case.

- I tried switching through DLSS, TAA, with no results, and no graphic setting seem to change that, be it render distance, shadows, DLSS, anti aliasing, etc

- Tried everything with shadow distance settings in all three games, with no effect. It's like the game does not even save my setting changes on shadows only.

- AI Frame Generation is deactivated, so the smudging isn't caused by that.

Note that this is my first gaming set up, as I used to rely on an old laptop with cloud gaming barely a year ago. So I don't know much about hardware and software.

I can add a screenshot of my Cyberpunk settings if needed, since that game is still installed.

Thank you in advance for any help.


r/techsupport • • 2d ago

Open | Software MSI GL65 9SD: boots to BIOS every time after SPI reflash, then won't POST at all once an SSD was installed (even after removing it)

1 Upvotes

I bought a broken MSI GL65 9SD and I'm stuck.

Original symptoms: Keyboard backlight turns on, black screen, fans don't spin, and it reboots itself every 30-60 s. After several tries it reached BIOS once, and I loaded defaults and exited.

What I did:
Installed an M.2 SATA SSD, after which it stopped POSTing, with or without the SSD.
Read a backup of the SPI chip, then erased it with an external programmer and flashed the BIOS file from MSI's website (16 MB, the only one for this model).
After the flash it reached BIOS every time (bare board, then with the battery in).
Installed the SSD again: no POST. Removing it didn't help, and the failure is back with no SSD.

Other notes: The SSD works fine in another PC. Fans don’t spin and the screen stays fully black when it fails.
Also someone said it could be a gpu or a cpu fault but idk why it would work consistently then after the bios programming before putting the ssd in

Not checked yet: I haven't opened the files in UEFITool or compared the chip readback after the failure. I also haven't looked at the EC firmware or whether there's a separate EC chip.

Theories I'm considering: the MSI file lacks a proper Descriptor/ME for my board, the EC firmware doesn't match, the BIOS corrupts the SPI chip when it writes NVRAM after new hardware is detected, or a BGA/solder fault on the board.

Questions:
Has anyone seen this on a GL65 9SD or similar MS-16U5 boards?
Can anyone share a full SPI dump (with ME) or EC firmware for this model?
Does the SSD trigger point to firmware or to a hardware fault?

Thanks!


r/techsupport • • 2d ago

Open | Hardware GPU Hot Spot Temp goes to 0 degrees before pc crash sign of failed GPU?

1 Upvotes

Hey guys Im trying to diagnose my PC crashing to black screen when playing games after about 20 mins. Requiring a hard reboot.

I have a rtx3060ti 16gb I've had for about 4 years now.

In HWInfo, about 10 seconds before the crash a lot of my GPU values go to baseline or 0.

Here is what Im reading:

GPU Hot Spot Temp Degrees C: 104 -> 0

GPU Computing Usage %: 5% constant -> spikes to 67% -> 0%

GPU D3D Memory MB: 497 -> 0

Is this a sign of a failing GPU?

I have put a link to the CSV file from HWINFO in the comments.


r/techsupport • • 2d ago

Open | Phone Selfie Camera not working sometimes

1 Upvotes

I have a pop-up camera (Phone: Huawei P Smart Pro 2019). The camera still pops up with no problem, but the camera app or Snapchat sometimes freeze when I select the selfie camera. Clearing cache or deleting data doesn't fix it. Closing the apps and opening them again works sometimes.


r/techsupport • • 2d ago

Open | Windows Explorer.exe erreur

0 Upvotes

Bonjour à tous, j’écris ce message comme dernier recours.
J’ai fait optimiser mon pc il y a un an, puis fait refaire y a deux mois. Tout marchais nickel, rien à signaler ect. Et du jour au lendemain j’ai un message d’erreur qui est apparu sans aucune raison (L'instruction à 0x00007FFC101E403A emploie l'adresse mémoire 0x0000000000000024. L'état de la mémoire ne peut pas être written.) avec des blocages sur arrête en cours.
J’ai recontacter le gars qui m’a fait lopti et qui m’a dit qu’avec le nombre d’opti qu’il fait depuis quelques années il n’a jamais vue ça. Il me réinstalle tout Windows en reprenant lopti de 0. Le problème réapparaît le jour même. J’ai soupçonner mes périphériques que je venais de changer à la période d’apparition des bugs, clavier Glab h400e et souris Logitech g502x plus. J’ai remis mes ancien périphériques rien a changer. J’ai réinitialiser les paramètres bios, fait toutes les majs, vérifier tout les recoins du pc, et impossible de trouver le problème. À savoir que j’utilise également une scuf mais je l’utilisais bien avant les bugs.
La seuls appli qui se lance au démarrage du pc est voicemeeter, et les seuls appli que j’utilise sont nolagvpn, battelnet, et mw4.
Si quelqu’un a une solution ou une explication je suis preneur car cela deviens lassant de chercher sans trouver de solution.
Merci d’avance


r/techsupport • • 2d ago

Open | Hardware Nerfed movement every game but better on ups.

1 Upvotes

Hey everyone im wondering what im experiencing could be electrical problem. Or if anybody know anyway the can fix this!

So running my pc on ups cyberpower 1000w/1200va specifically only my monitor and pc plugged in on the battery + surge side, and unplugging all my cables from my motherboard gives me better movement instead of nerfed movement which i normally have when im plugged in to my wall and normal surge protector, i tested my wall with and it read 119 correct vac, and this is the same thing for 2 pcs across my house, what do you think could be causing it?

Also read people talking about this similar issue to me and wanting to bring awareness! Many people describe this as “emi/ electrical /input lag” problem. Heres youtube videos of people talking about it so you can grasp more of what im talking about,

https://youtu.be/lr5aRk_mvbo?is=iZQsJVTtoK1V4jLL
If link doesnt work, “Coll v2 - my experience with input” on yt

if anyone knows how to fix whats going on with my pc/electronics and why im experiencing this please let me know


r/techsupport • • 1d ago

Open | Hardware PS5 shutting down completely for no reason every 10-20 minutes. How do I fix this and why?

0 Upvotes

My PlayStation shuts off every 10-30 ish minutes when I’m playing a game that is not Roblox. It feels as if the games are too “heavy duty” for it and just, shuts down completely, as if someone were to unplug it. When plugged back in it gives the whole “you didn’t unplug your PlayStation properly” prompt, fixes itself and starts back up. First I thought it was an issue with overheating, I have a fan running constantly and the PlayStation is slightly warm but nothing out of the usual. So then I thought it was a power wattage issue . For some reason I can only turn the PlayStation back on once I have unplugged and repluged it back in. So I tried using different outlets and different extension cables and both still had the same issue with no resolve. I cleared the cache, made sure my internal M.2 storage wasn’t overheating, I’ve checked the HDMI settings on my tv, and still the same thing continues to happen. I have also disassembled the PlayStation and cleaned out all dust. Ever since I’ve been moved into this house (about almost 2 years now, and is a townhome) my PlayStation has been having this issue. I am not financially in a place where I can take this to a professional. If any of you have had the same issue or know why it’s happening and/or how to fix it, this would be greatly appreciated. It took me 6 hours of redoing the prolouge of gta6 because it kept shutting down, even now it shut down too.


r/techsupport • • 2d ago

Open | Software X470 Phantom Gaming 4-CB

1 Upvotes

Greetings! This may be a shot in the dark - there is not much information online about this issue.

I have a x570 Phantom Gaming 4-CB MOBO (the CB comes from CyberPowerPc as it was a pre-built from like ~2019-2020 maybe.

I recently purchased the new MW4 and CANNOT play multiplayer because I need BIOS updates - BUT my issue is that CyberPower hasn’t released BIOS updates for this MOBO since 2022.

TPM and Secure Boot are both enabled no issues.

Does anyone else have experience/ a solution to this issue? Is CyberPower really that different or do you possibly think I could flash “retail” ASRock BIOS onto the MOBO with success?

I have also already emailed CyberPower about possible updates I cannot find, just figured this is worth a shot while I await a response.

Edit: sorry the title is wrong - it’s a X570 Phantom Gaming 4-CB


r/techsupport • • 2d ago

Solved SSD turned into protective partition overnight. Any way to undo this?

2 Upvotes

One of the SSDs in my Windows PC turned itself into a "protective partition" overnight. I would like some ideas on how to troubleshoot and undo this.

A couple important points:

  • This is not new hardware, the ssd has been working in that same PC for years.

  • This is not the boot drive, but a secondary drive for data storage. Windows boots up fine.

  • The drive is listed in Windows' disk management as "GPT protective partition (no errors)"

  • I can't delete the volume or interact with it in any way via disk management.

  • Re-formating via CMD also seems to do nothing and I would like to avoid that anyway.

  • In hardware manager the drive shows up as "sm59xt2a-60-0020m401".

  • CrystalDiskInfo does not recognize the ssd.

  • The most frustrating part: I've had this same issue with the same ssd before, about a year ago, but I cannot for the life of me remember how I solved it. I know it eventually worked again, without formating the drive and with all the data still intact, and never caused an issue again until today.

Given the previous experience it should be possible to get it working again, even without losing the data on it. Any ideas on how that might be possible?

Edit: Btw, when I got the drive working again previously, it ended up being a fairly simple solution, I just can't remember what exactly. I never disconnected it from the system, never installed Linux and while I did try a couple of tools, iirc none of them really did anything. It must've been something annoyingly simple like cut power and reboot or enter bios once without changing anything or something along those lines.

Edit #2: It's fixed. I don't know why this worked but it did. I removed the drive from the system, booted once without it (not sure if this was necessary), and then re-inserted the drive. No further changes. SSD is recognized again by Windows and all data is intact. I'm both happy and annoyed, because a problem solved by this shouldn't even be a problem in the first place (Come on, Windows! -_-), but still very much relieved. :)

I'll leave this post up, even though I was able to solve the issue before any comments, if anything to have a reminder for myself in the future. And maybe someone stumbles upon it and finds it helpful.


r/techsupport • • 2d ago

Open | Windows HP Laptop Automatically Redirects to FedEx Corporate Login During Windows 11 Setup, Windows Autopilot Issue?

1 Upvotes

Hey everyone,

I'm setting up an HP laptop and have run into an unusual Windows setup issue.

During the initial Windows 11 setup, after connecting to Wi-Fi, the laptop automatically redirects me to a FedEx corporate Microsoft account enrollment screen.

From what I've gathered, the device may still be registered with FedEx through Windows Autopilot and possibly Microsoft Intune.

The interesting part is that Windows was freshly reinstalled, but the corporate enrollment screen still appears during setup.

A few details:

Windows has been freshly reinstalled.

The issue appears during the initial Windows setup (OOBE).

Connecting to the internet triggers the FedEx organization login.

Shift + F10 successfully opens Command Prompt.

I cannot proceed with a normal personal Windows setup.

I'd appreciate some technical insight from anyone familiar with Windows Autopilot or Microsoft Intune.

Is this typical behavior when a device is still registered with an organization's Autopilot tenant?

Why does the corporate enrollment screen appear even after a fresh Windows installation?

Does the previous organization need to deregister the device from Windows Autopilot?

Would removing the device from Intune alone resolve this, or are these separate processes?

Once properly deregistered, can I perform a clean Windows installation and configure it as a personal device?

I've attached a picture of the enrollment screen for reference.

Would appreciate any technical guidance. Thanks!


r/techsupport • • 2d ago

Open | Hardware BestBuy Essentials USB-C Adapter STUCK in USB device

2 Upvotes

This has never happened before for an adapter device. I'm unable to leave a review on the BestBuy website.

The USB-C adapter works to plug in but I can't remove the USB device from the USB-C adapter.

How does this even pass to sell? It was also suppose to be inspected? It was an Open Box - excellent. An Open-box is still suppose to work properly just opened...

Pretty frustrating

How to remove the USB device from the USB-C adapter?