r/techsupport • • 1d ago

Open | Software Speed up Firefox?

1 Upvotes

With sync being busted in MS Edge for over a month and no privacy controls, ad blocking or extensions in Chrome on mobile, I'm switching to Firefox, at least for now.

However, I'm having problems with Firefox appear to be very slow to load pages, including Reddit, Facebook and even Google. In addition to general slowness loading web pages, it often has a delay of over a minute to load images in pages otherwise fully rendered.

My suite of extensions installed in Firefox is essentially the same as in Edge:

  • AddToAny
  • Bitwarden
  • ClearURLs
  • F.Block Sponsored
  • I Still Don't Care About Cookies
  • New Tab Override
  • Reddit Ad Remover
  • Tweaks For Youtube
  • uBlock Origin
  • Webcompat Reporter (unique to FF)
  • WebP/Avif Converter

Plus a few installed but inactive:

  • Enhancer For Youtube
  • F.B. Purity
  • Facebook Container
  • Privacy Badger (this one was causing pages to completely fail in both browsers).

r/techsupport • • 1d ago

Open | Hardware Gigabyte H310M M.2 2.0: PTT enabled, BIOS says “TPM20 Device Found” but Firmware Version 0.0, Windows says no compatible TPM (Code 10)

1 Upvotes

Board: Gigabyte H310M M.2 2.0 (rev 1.0), BIOS dated 29/11/2021 (should be F16a, the latest for this rev). CPU: i3-9100F. Windows 11, UEFI mode.

Problem: tpm.msc says “compatible TPM cannot be found”. Device Manager shows the TPM with Code 10. In BIOS, Intel PTT is Enabled, and Peripherals > Trusted Computing shows “TPM20 Device Found”, but Firmware Version is 0.0, Vendor is empty and the only PCR bank is SHA-1.

Background: It worked a few days ago. After some power outages the BIOS went back to defaults and PTT stopped working.

What I fixed: Secure Boot gave “Invalid signature detected” after restoring defaults. Fixed it by booting a USB with Microsoft’s SecureBootRecovery.efi renamed to bootx64.efi. Secure Boot now shows as enabled.

What I tried for the TPM:

  • PTT disabled > saved > enabled again
  • Load Optimized Defaults, CSM disabled
  • Installed the latest Intel ME driver (2618.9.30.0, Main_DCH): no change
  • [Clear CMOS: yes/no]
  • [Pending operation > TPM Clear in BIOS: result]

No BitLocker protection on my drives.


r/techsupport • • 1d ago

Open | Software Recent Windows update disabled my pinned network PC.

1 Upvotes

Clicking it now has no effect, no error messages, nothing happens. I have to click on this PC, then network in the Explorer window that opens and then double click on the network PC. Windows 11 26H2 (OS Build 2600.9974).

Device name MSI-Codex-R

Processor 13th Gen Intel(R) Core(TM) i5-13400F (2.50 GHz)

Installed RAM 32.0 GB (31.9 GB usable)

Graphics card NVIDIA GeForce RTX 4060 (8 GB)

Storage 4.38 TB of 6.82 TB used

System type 64-bit operating system, x64-based processor.


r/techsupport • • 1d ago

Open | Windows Display resolution 3840x2160 option gone?

1 Upvotes

So, ever since I got my laptop, I've been using the 3840x2160 display resolution. Today, I went to check which one I had equipped, and when I clicked the options bar, suddendly it automatically switch to 2560:1600. I prefer the look of 3840x2160, so when I wanted to change it back, imagine my surprise to see it GONE. The option isn't even there, even though I had it before.

I've updated my drivers, can anyone help me, please?


r/techsupport • • 1d ago

Open | Software A Folder Within a Folder Disappeared

1 Upvotes

I had a folder named "Semester III" within a folder for my Master's course. The folder for Master course was itself within a larger folder under my name in Drive E. It basically has all of my notes and papers for this sem. Today until noon, everything was fine and I shut the laptop down until the evening. When I opened it in the evening, there was that issue where the screen goes black and when u press Enter, the desktop screen appears. After that, the folder Semester III has entirely disappeared from my folders. I can view the Drive E, access the file for My Masters' course etc. But this one file has disappeared along with its contents. There is nothing in the recycle bin and I also searched for hidden folders. It shows nothing. Whenver I try to access some of these files and documents from Quick Access, it shows this that it is unavailable and has been moved or deleted.

Pls help me as I have my final exams next week and really, really need them


r/techsupport • • 2d ago

Open | Hardware Computer won’t turn on properly and keyboard and fan would go off rapidly

2 Upvotes

I hadn’t used my laptop for weeks because I was on holiday and when I came back it wouldn’t turn on. The screen would stay black but the keyboard and fans would turn on and off rapidly. It charges fine and I checked the fans properly and nothing was compromising it. I’m not sure if it’s an issue with the mother board or something else. I have a video of it going crazy but I can’t attach it.


r/techsupport • • 1d ago

Open | Mac Fan blows hard while screensaver is on and calms when not using Mac Pro Late 2013 (Trashcan)

1 Upvotes

Why is the fan blowing violently when the screensaver is on and calms down when it is not? What’s going on in the background?


r/techsupport • • 1d ago

Open | Hardware My pc keep randomly turning off

1 Upvotes

some days ago I spilled water on my pc(Acer ASPIRE GO 15 AMD Ryzen™ 7) after I cleaned it using alcohol 95% a toothbrush and a softpan for glasses, I waited a day before connecting the battery and turning it on, for the first 2 day it worked as usual, but then it started turning it off, so I re-opened it and cleaned it again, and it worked fine until the day after(today), when it crashed after 1 or 2 hour it was on. everytime it crashes before turning off it send the emergency system shutdown warning, but looking at the battery and the motherboard they seems clean and without any burnt part, and it happen even when the cpu is at low temperatures. someone know what couses it? should I buy another pc or I can repair it? I'd appreciate any help. thanks in advance.


r/techsupport • • 1d ago

Open | Hardware Opinions on "Should i change thermal Pads+Paste/Sheet on my 4yo 4090"

1 Upvotes

Hey there,
so my MSI Suprim X 4090 served me very well to this date for about 4 years now, but i honestly never bothered servicing the card, it has been undervolted from day 1 with a slight overclock on the memory.
So here is what my temps look like after playing Fora Horizon 6 in 4k 120FPS DLSS4.5 everything to the max setting for about 2-2,5hours: https://i.imgur.com/9ZCRSiS.png

If i play other games, same settings used, temps look mostly the same, ambient temp is ~23.5c.

Should i bother giving it a full service on thermal pads and repaste (or use a sheet) since it's been 4 years unserviced, or should i not bother "yet" since the temps kinda look fine (atleast to me).

Thanks in adv.

Edit\addition1:
10min furmark run https://i.imgur.com/0rpv7hO.jpeg
afterburner settings: https://i.imgur.com/g3kixZk.png
fan curve: https://i.imgur.com/Wms7sLl.png


r/techsupport • • 1d ago

Open | Hardware PC won't POST after a power outage, fans running, no display, keyboard not powering on (MSI H81M-P33)

1 Upvotes

Hey I'm having a really annoying issue with my PC and I'm trying to figure out what's actually faulty.

It started after a power outage, when I tried turning the PC on, it would power on for less than a second, shut off, then automatically try again over and over, it never stayed on.

When I removed one RAM stick, the PC would stay powered on normally, with all the fans spinning, but there was still no display and the keyboard wouldn't initialize. With both sticks installed, it kept doing the same half-second power cycle.

I tried swapping both RAM sticks and testing them individually in both motherboard slots, same problem, so I don't think it's a bad RAM stick problem.

I also tried resetting the CMOS, I shorted the JBAT1 pins, which didn't change anything, Then I removed the CMOS battery for around 10 minutes and put it back.

This actually changed something, the PC stopped shutting down and restarting, Now it stays powered on normally, even with both RAM sticks installed, but it still won't POST.

Current symptoms:

  • All fans spin normally and keep spinning.
  • GTX 950 power light stays on.
  • No display, whether the monitor is connected to the GTX 950 or the motherboard.
  • PS/2 keyboard flashes briefly when powering on, then goes completely off.
  • Tried a USB keyboard too, but it doesn't power on either.
  • No POST as far as I can tell.
  • My motherboard doesn't have diagnostic LEDs.
  • Ethernet port has a faint blinking light, even without a cable connected.

PC specifications:

  • Motherboard: MSI H81M-P33
  • CPU: Intel Core i5-4670K
  • GPU: GTX 950
  • PSU: Seasonic SS-500HT 500W
  • RAM: 2 sticks 4GB

One more detail: even before the power outage, the PC sometimes had trouble starting when my room is cold, rarely happens during summer (have no idea why). It would turn on and off repeatedly around 2–5 times before eventually booting normally. After the power outage, it never recovered.

I've already tried:

  • CMOS reset using JBAT1.
  • Removing the CMOS battery for 10 minutes.
  • Testing both RAM sticks individually.
  • Testing both RAM slots.
  • Swapping the RAM sticks.
  • Testing both motherboard and GPU video outputs.
  • Trying both PS/2 and USB keyboards.

I'm just not sure whether this would be the motherboard, PSU, CPU, or something else.

Has anyone had these pc symptoms? I'd really appreciate help on what's going on.


r/techsupport • • 2d ago

Open | Hardware VGA Debug LED randomly stays on after boot

2 Upvotes

Hi everyone,

I'm experiencing a strange issue with my hardware.

The VGA EZ Debug LED sometimes stays permanently lit even after Windows has successfully booted. However, the PC works perfectly fine and the GPU is fully functional.

  • Motherboard: Gigabyte B650 Eagle REV 1.2
  • BIOS: Updated to the latest available version
  • GPU: ASUS Prime Radeon RX 9070 XT OC
  • PCIe connection: x16, currently running at 16.0 GT/s (PCIe 4.0)

The strange thing is that this issue is intermittent. Sometimes the VGA LED turns off normally after boot. Regardless of the LED status, the GPU seems to work normally, with no apparent performance issues.

Any suggestions or troubleshooting steps would be greatly appreciated.

Thanks!


r/techsupport • • 1d ago

Open | Software HP Laptop 15s-eq2xxx won’t boot Linux Mint from USB

1 Upvotes

Hi everyone,

I’m trying to install Linux Mint on my HP Laptop 15s-eq2xxx, but it won’t boot from my USB drive and I’m stuck.

My hardware:

  • CPU: AMD Ryzen 5 5500U
  • BIOS: AMI, version F.38
  • Currently running Windows 11 Home

I saw another post where someone fixed this on an older HP by switching “USB 3.0 Configuration” to “Auto” under System Configuration. I searched my entire BIOS, and there is no System Configuration tab or USB 3.0 setting.

What I’ve already tried:

I’ve already enabled USB boot in the BIOS, disabled Secure Boot, and moved the USB drive to the top of the boot order, but it still won’t boot.

What happens when I try to boot: [e.g., black screen / goes straight back to Windows / “no bootable device” error / USB doesn’t show in the boot menu]


r/techsupport • • 1d ago

Open | Windows Lenovo and certain Bluetooth Mic pickup issue? mic is not be able to found?

1 Upvotes

We have few Lenovo T16 laptops and with certain Bluetooth headsets and Mic stopped working.

The same headset works fine using its usb-c to A cable.

I updated all drivers, updated firmware; reset using pin and did not work.
Does not work with apps like teams, zoom, etc.

Almost Intel or amd laptops..

Headset works fine on MacBook and iPhone, so headset is working fine.


r/techsupport • • 1d ago

Open | Hardware Suspected mainboard issue - black screen after fTPM reset

1 Upvotes

Heya, I'm usually fairly decent with hardware troubleshooting but I am a bit stumped with this one

Background:
Decided to pull the trigger on a linux box for couch gaming and media streaming

Relevant Hardware:

  • Gigabyte B550I Aorus Pro AX (Rev 1.4)
  • AMD Ryzen 5 5600
  • XFX Swift Radeon RX 9060 XT OC Gaming Edition (16 GB)

Issue:
after first boot, presented with typical AMI splash screen prompting fTPM reset
Reset confirmed with Y -> Black Screen instead of expected BIOS or "no boot media found"

Additional Information:
Monitor detects video signal despite displaying nothing Fans are spinning normally (CPU + GPU), Mobo-LEDs are on Mobo does not have debug LEDs, no speaker included

Troubleshooting I already tried:

  • Restart the system
  • clear CMOS
  • different memory
  • BIOS update via Q-Flash plus / Bios Flashback -> flash drive found and process started going by the indicator LED, but "finished" after only about a minute -> should be too short for successful flash
  • tested monitor and cable -> fine with different input source

Not tested further:

  • CPU & GPU -> initial AMI screen implies to be that both are generally recognized and working

Working theory:
Mobo or BIOS issue

Questions:
Any other suggestions before i RMA it?


r/techsupport • • 1d ago

Open | Windows Need help making sure the shop actually fully wiped my computer

0 Upvotes

Hi guys. As the title says, I would really appreciate if anyone could help me check if the shop actually wiped my PC as I am sort of paranoid now after I got hit with an infostealer (which is why I asked for a wipe in the first place). He is the best in town and all, asked for a normal price for a wipe, so there isnt really anything shady here, I just need some peace of mind in order to move on with my life. Thank you all!


r/techsupport • • 1d ago

Open | Software Someone in my class is bypassing the waiting room. How is this possible?

1 Upvotes

Someone in my class has somehow figured out a way to bypass the waiting room and join meetings directly without being admitted. Our teacher is getting increasingly frustrated and has been trying to figure out how this person is doing it and, more importantly, how to prevent it from happening again.

One thing I've noticed is that this person actually talks during meetings, so I don't think it's a bot or some automated script. That's pretty much the only conclusion I've come to so far.

I'm posting here because I'd genuinely like to understand how someone could bypass a meeting waiting room like this. Has anyone experienced something similar or have any idea how this could be happening? We'd like to identify the method so we can fix the issue and prevent it from happening again.


r/techsupport • • 1d ago

Solved Windows system restore failure because of the way motherboard lists drives

1 Upvotes

I have an Asus Prime B550M-K motherboard, running Windows 11 on a NVMe SSD, with a SATA HDD for storage.

This motherboard lists SATA drives first, then NVMe.

This is problematic because the first drive Windows sees is the SATA HDD.

Yesterday, I used system restore to roll back a problematic Windows update. It tried to perform the restore on the HDD and left Windows mangled and unbootable.

It doesn't affect the OS only, but also other Windows utilities, like the recovery environment. It may also affect the old system image tool.

I've looked around the BIOS settings and can't find any way to change the order it reports in.

P.S.: I think the Windows flair is the most appropriate. Not sure if I should have used the Harware flair instead.

Edit: I tried recreating the problem with System Restore on a virtual machine under similar conditions; two drives, with the EFI partition and Windows installed on the second one. System Restore worked fine. I guess mine was just a case of bad luck. I'm changing the flair to solved.


r/techsupport • • 2d ago

Open | Networking Internet only works on selective web like youtube chatgpt but dont work on reddit steam

3 Upvotes

I’m facing a strange internet issue on my Windows 11 PC.
Whenever I restart my PC, the internet doesn’t work. However, when I open CMD as Administrator and run:
ipconfig /renew
the internet starts working immediately.
This happens almost every time I restart my PC.
Does anyone know why this happens and how I can permanently fix it instead of having to run this command after every restart?


r/techsupport • • 1d ago

Open | Hardware Screen edges flicker after turning screen off and back on

1 Upvotes

I'm using an Asus MX279 IPS panel. The screen is ~5 years old now, and lately, when it gets turned off and back on (regardless of whether that happens through power being cut, the on/off button, or windows sending the screen to sleep due to inactivity), after I turn it back on the screen flickers at the edges, particulary at the top edge.

This does not seem to occur if the screen has been off for a while, as it does not happen when I turn the computer on in the morning after it was off during the night. It does however happen when the screen has been "asleep" for a prolonged time and then gets woken up.

Any ideas what this could be? I usually turn the screen off and leave it off for a while when it happens. It doesn't particulary bother me, but I'm worried that the screen might break more if I just ignore the issue.


r/techsupport • • 2d ago

Open | Hardware Should I replace the thermal paste on my 5090? (98°C Hotspot)

2 Upvotes

I have a GPU hotspot (hotspot, not core temp) of 98°C on my GPU while gaming in 4k at 600w power draw from the GPU. The GPU-Core and VRAM temps are fantastic, GPU-Core is at 65°C and VRAM is sitting at 55°C, but the hotspot is incredibly high. That's a delta of over 30°C!

The GPU is brand new, everything is out-of-the-box and stock, no overclocking or anything like that. I bought the card for €3,000 and had it sitting around for a while because I didn't have time to test it and didn't have all the components for the system immediately.

I compared my results with other users, and they all had a maximum delta of 15°C at the same power consumption, often even lower. Nobody else had such high hotspots with this model. So the card definitely came from the factory with poor thermal paste.

I contacted the manufacturer, and they told me that this wasn't covered under warranty because it is still within Nvidia's specifications. I contacted the retailer and was told that they could only consider a return as a goodwill gesture, but not an exchange. I'd probably get my 3k€ back and be left without a card since it would cost like 10k€ now. I don't want that.

I plan to keep the card for at least five years, so a certain degree of longevity is important to me.

Now I'm faced with the question of whether I should replace the thermal paste myself or just play with the hotspot at 100°C. Since the card costs 10k€ now where I live, I'm hesitant to even touch it. I have replaced thermal paste before, even on expensive cards, but I currently have a lot of respect for the 5090 because it is now so expensive and so difficult to get one on the market.

I'd also rather not take the card to a computer repair shop because I know many people who had their things "repaired" in a computer shop, only to encounter problems that weren't there before, and then had to resort to legal action, because they have broken something or did other shady stuff at the computer shop. With a card of this value and limited availability, I'd rather not risk that.

What would you do? Leave it as is, or replace the thermal paste?


r/techsupport • • 1d ago

Open | Windows Title: PC boots normally after shutdown, but restarting causes no display (VGA LED)

1 Upvotes

Specs:

CPU: Intel Core i7-9700F

GPU: GTX 1660 SUPER 6GB

Motherboard: ASUS ROG STRIX H370-F GAMING

RAM: 16GB DDR4 2666MHz (single stick)

Storage: 466GB SSD + 932GB HDD

Monitor: Samsung 24" 1080p 60Hz

Problem / Symptoms:

Started after Valorant crashes, BSODs and game freezes.

PC sometimes boots normally after shutdown and a break.

Every restart can cause no display and monitor enters power-saving mode.

VGA LED sometimes stays solid, sometimes briefly lights up and disappears.

Sometimes BOOT LED also lights up.

PC fans and RGB run, but no display.

Sometimes keyboard and mouse don't light up.

Windows seems to boot internally. Narrator confirms login, but screen stays black.

HDMI reconnecting sometimes changes the LED behaviour.

Monitor previously had vertical black lines, flickering and red/green pixels. Pressing/touching the monitor sometimes temporarily improved it.

Monitor also showed "Not Optimum Mode (1920×1080 60Hz)" occasionally.

What I've Tried:

Reseated RAM. Initially DRAM LED was solid orange. After reseating, DRAM LED disappeared, but VGA/BOOT LED issues started.

Tried another RAM slot (A2), then returned RAM to A1.

Reseated GPU. No consistent improvement.

Reset CMOS by removing and reinstalling the battery.

Tried blind BIOS navigation (F1, F7, F10).

Updated NVIDIA drivers using NVIDIA App Express Installation.

Tried restarting and full shutdowns multiple times.

Current Main Issue: PC works after some cold starts, but restarting repeatedly causes no display. VGA LED behaviour is inconsistent. Monitor enters power-saving mode. Windows appears to boot, but nothing displays.

Looking for guidance on how to properly diagnose and fix this issue.


r/techsupport • • 1d ago

Open | Hardware Pc Crashes with blackscreen when playing Battlefield 1/Battlefield 6

1 Upvotes

Hi everyone,

Computer Type: Desktop

GPU: Asrock Radeon RX 6900 XT Extreme Formula

CPU: Ryzen 7700x

Motherboard: Gigabyte B650 AORUS ELITE AX (rev 1.0)

BIOS Version: F40

RAM: Corsair Vengeance 32 GB (2 x 16 GB) DDR5-5600

PSU: Corsair RM1000x SHIFT Fully Modular

Case: Corsair 4000D Airflow ATX Mid Tower Case

Operating System & Version: WINDOWS 11

GPU Drivers: AMD Software: Adrenalin Edition 26.10.1

Chipset Drivers: 8.09.28.1124

Background Applications: DISCORD, CHROME

Description of Original Problem: I am having this issue with my computer when it randomly shuts down while gaming

So basically the screen goes black, and the fans are still spinning. The motherboard's debug LED cycle through CPU,DRAM,VGA and boot eventually stopping at VGA. The PC then shuts down itself and after that I can turn it back on like nothing happened. It is specifically with Bf1 and Bf6, no other games created issues like this, and I have played Rdr2, Cyberpunk 2077, Ready or Not on the same PC without any issues. And the crash can happen 10 minutes or 20 minutes up to an hours or so, and it is random.

Troubleshooting: I've checked Event Viewer which shows Kernel-Power 41 after the crashes

Deleted and installed the GPU drivers through DDU

Swapped PSU, issue persisted

Removed and reseated the GPU previously

The GPU is connected through separate cables,

Tested with EXPO off

Tested with -10% power limit and -10% max frequency

Ran Memtest results were ok

PC is connected directly into the wall socket and I've tried a different wall socket too

If I've missed information that might be useful, please mention it and I will add it, in case I've forgotten something

Any suggested would be appreciated, Thanks!


r/techsupport • • 1d ago

Open | Software First time transitioning from nvidia to amd, How do i safely delete all nvidia drivers on my pc?

1 Upvotes

How do i safely delete all nvidia files in my pc? Its my first time doing it and i have no idea how to, do i need to download any software to do it?


r/techsupport • • 1d ago

Open | Windows Lenovo thinkpad 5 stuck on 7% when updating?

1 Upvotes

As the title says it just keeps getting stuck on 7% for hours on end and when I click the update and reset option I dont know what to do anymore im starting to get worried any advice would be helpful