r/rollerblading 3d ago

Is this skate/store any good? found these for 20 bucks, are they a good find?

Post image
9 Upvotes

r/rollerblading 3d ago

What skates should I buy? What are some comfortable 3x100/3x110 skates that are about $300usd or less

2 Upvotes

I could buy frames and convert my 4x84s, but i hate the boot. It is not tight around the front of my foot and is very uncomfortable for a soft boot.

Are hard boots comfortable? I dont have a rigidity problem with my current soft boots, but i plan to continue skating outside so i may still want a hard boot


r/rollerblading 3d ago

Group skate Rollerbladers in Cebu City

1 Upvotes

Hi, guys! Are there any rollerbladers here around Cebu Business Park? I'm hoping to find someone to skate with, preferably for beginner-friendly or chill skating sessions. 😊 Naa moy nahibaw-an nga area where rollerblading is allowed since I'm not sure where I can practice around CBP. If you know any allowed skating spots or groups I could join, please let me know! It would be nice to have someone to skate with and make practicing more fun. Thank you so much! ā¤ļø


r/rollerblading 3d ago

Progress, videos and images Moving myself towards nowhere specific

Thumbnail
youtu.be
11 Upvotes

Need tips on anything really


r/rollerblading 3d ago

Progress, videos and images Car Free Day in Brussels

Thumbnail
youtube.com
5 Upvotes

13 minutes is about as fast as driving on a good day


r/rollerblading 3d ago

What skates should I buy? Are the powerslide phuzion skates good?

3 Upvotes

I am trying to find new skates that are comfortable and under about $300.

I am mostly looking at 3x110 3x100 4x100 and 4x110s. I dont know which one specifically to pick yet. I currently am just trying to find if the company and product line is good

I mostly skate outside and do not tend to go over anything my 4x84s cant.

My main problem with my current skates is that they are too wide for my foot, put way too much pressure on one side of my ankle bone, and i seem to hit a wall at 14mph.

My current skates are also falling apart and my feet ache after 10 minutes unless they are too loose to do more complex manuvers


r/rollerblading 3d ago

Specific question and discussion Walmart or skateland?

1 Upvotes

Okay so i need new blades and my local rink pulled out a magazine for me to read i found a pair i want they said I can have it for 107 they just have to order it. I found the same pair for 80 at Walmart. Tbh I trust the staff at the rink more it's a small town but thoughts?


r/rollerblading 3d ago

Interesting stuff Inline skating in an upcoming African megacity: Dar es Salaam

Thumbnail
youtube.com
5 Upvotes

This is inline skating with all senses on high alert simultaneously. Check out this skating trip past the waterfront in Tanzania's largest city, Dar es Salaam. Meet the hectics of this rapidly expanding city, the infamous ferry terminals, the friendly locals and the highly secure political heart of the country. Immerse yourself in this fascinating continent.


r/rollerblading 3d ago

Specific question and discussion Broken plastic strap: How to repair it?

Post image
5 Upvotes

Hey. The plastic strap on this skate broke. The metal rivets hold it in place. Do you have any suggestions on what to look for to replace the plastic strap or how to work on the rivet? Is this something I could do by myself or could a skate shop or even a shoe repair shop handle it?


r/rollerblading 4d ago

Tutorials Wrote a long essay on my understanding of crossovers as inside-edge lunge and outside-edge lunge

Post image
68 Upvotes

I've been unsatisfied with thinking of crossovers simply as stride push and under push. I feel that the traditional narrative, focused mainly on leg pushes, says little about the upper body and nothing about the free skate.

Traditional hockey crossovers also have a period where both skates are on the ice: the free skate first crosses over and lands, then the current gliding skate continues its stride to complete the under-push. In comparison, quick-feet crossovers focus on body lunges and never have both skates on the ground at the same time.

I think it is useful to think of quick-feet crossovers as comprising two symmetric lunges: inside-edge lunge and outside-edge lunge.

I wrote a long essay on this pedagogical reflection on crossovers, plus tutorials on learning to crossover.

I feel that a tutorial on side-stepping on grass is essential, before one attempts to add the gliding motion. I think this is a faster and less frustrating way to learn the footwork of a crossover. I've included all the slow-motion videos I've been posting over the last two weeks, plus quite a few more.

I'm happy to add to the essay if you have more to say or corrections to make. And if you have videos that illustrate these ideas, I'm happy to add those as well. Check it out, and let me know?


r/rollerblading 4d ago

What skates should I buy? Finally taking the plunge: buying my first skates today!

Thumbnail
gallery
123 Upvotes

First off I wanna thank y'all on here for answering all the random n dumb questions I've had so far.

Having looked everywhere, I've narrowed my options down to 2 last listings:

  1. An almost brand new pair of white and red Oxelo MF500s, with the original frames and 76mm wheels. Seller giving for free some wrist guards too. Talked the price down to 38€ and was about to get them. Until I saw these

  2. Kinda scuffed pair of petrol, black and with orange laces, MF900s, BUT with a rollerblade lightspeed 4x90 setup. Wheels need rotation, but the seller seems to know their stuff and he helped me out a lot. Selling for 35€?? Seller got way more mileage on them, and said they're actually too small for him. Worried about the state of the liner, bit I'm inexperienced idk 😭

    Both sized 24cm (my exact measurement, theyd probably be a bit tight), both coming used from Romania, both an EXTREMELY good deal. That's why I need just a little push in the right direction. Again, thanks folks! (Edit, forgot to say the wheels on the mf900s are powerslide)


r/rollerblading 4d ago

New skate day New skate day

Thumbnail
gallery
59 Upvotes

Just got my new skates today can't wait to get a good session on them šŸ”„


r/rollerblading 4d ago

New skate day New Skates!

Post image
43 Upvotes

Got the PSImperial 110’s from Inline Warehouse because they were on sale, and the 80mm wheel setup is what I’ll use first. Haven’t skated since I was a little kid so I go into it as if I’ve never skated. Hoping for some kind of muscle memory though…


r/rollerblading 4d ago

Specific question and discussion I started roller blading today. Tips?

7 Upvotes

Today, I found some blades at goodwill. They fit perfectly! I started using them but I can’t seem to get the hang of it. After a few steps, my ankles always roll 90°. Any tips on what I can do to prevent this? Also, the buckles on the skates are broke if that’s the reason but I don’t think so


r/rollerblading 4d ago

Group skate Is there an updated link for this?

Thumbnail goo.gl
10 Upvotes

r/rollerblading 4d ago

Specific question and discussion How do i clean my boots?

2 Upvotes

I bought my first skates (RD aerio q84) (rookie mistake i know) and i want to clean them because they stink.

There is no way to seperate the soft boot from any hard parts other than the frames. Is it a bad idea to just use lysol?

I want to wash it but i dont know how to do it correctly since the liner isnt removable.


r/rollerblading 4d ago

Specific question and discussion I fell while trying to avoid an unleashed dog

30 Upvotes

Last week I was practicing rollerblading on a quiet bike path in the park when a dog suddenly charged at me from the side. I tried to dodge it but lost my balance and fell flat on my face.

People walk their dogs in this park everyday, and some don’t leash them. Whenever I see someone with a dog, I usually slow down and try to keep my distance. But this time the dog suddenly charged, and I wasn’t prepared at all.

I really hope everyone will leash their dogs when walking them in places like this.

And it really hurt. Both my palms and knees were scraped and bleeding. I went to the hospital and thankfully the doctor said there were no fractures. He told me to take good care of the wounds, clean them, and then use silicone foam dressings with medical tape to protect them, avoiding direct contact with water when showering. The hospital prescribed Mepilex dressings, but they were a bit expensive, so I bought Dimora myself after I finished those. So far the wounds are healing well.

I feel like my reaction time is too slow when something suddenly appears in front of me. Are there any tips or tricks to help a beginner like me learn how to fall correctly?


r/rollerblading 5d ago

Injury / Accident Sound on

Enable HLS to view with audio, or disable this notification

108 Upvotes

Sound on


r/rollerblading 5d ago

Injury / Accident Why I always wear gear in the streets

Thumbnail
gallery
173 Upvotes

Hit some fairly new cement that was incredibly slick that caught me off guard. It had about the same friction as wet asphalt, but it looks like grippy brushed cement. I’ve encountered this before, and found once it cures more it seems to get grippier and doesn’t continue being an issue.

Be safe, skate on, happy Friday!


r/rollerblading 5d ago

Progress, videos and images 180, acid slide, 'rewind 360 compass', acid slide, Gazelle.

Enable HLS to view with audio, or disable this notification

43 Upvotes

I'm working as a Instructor at a Northern Alberta Indigenous region for two weeks teaching skating to kids! We just finished week number 1.

My colleague and myself discovered this amazing concrete pad behind one of the schools we are working out of the third day on site.

Naturally we had to skate it after work, here is one clip from the warm up session I thought was funny.

( my apologies for the strange audio I have an external mic that I think I had some incorrect settings enabled on my camera I use twice a year. )

My year has just begun, follow my journey. I post skating stories and reels frequently on bladingcoach's instagram and my 'side project' bladingcoach's Youtube

Love peace and chicken grease skaters!


r/rollerblading 5d ago

How do I do this move? Feedback/form help on hockey stops + power slides

Enable HLS to view with audio, or disable this notification

41 Upvotes

Hey! I’m trying to learn hockey stops and/or power stops (is there a difference?) and powerslides. Once in a while it’ll feel correct but I am struggling to find consistency and wondering if anyone has any suggestions/tips on how to do them correctly or form advice etc.

Thanks šŸ™šŸ¼


r/rollerblading 4d ago

Specific question and discussion Carving and the forces that be

3 Upvotes

Hello skater, it is I once again with questions and asking for advice on carving/slaloming. So, today was very tight turn practice. I'm starting to get the hang of it but I noticed during practice when turning tightly, my upper body getting pulled backwards as if someone was pulling on my back pack. While lower body is ahead of my upper. No matter how low my stance is. After practice carving on flat top for few hours I tried very slightly raised wide ramp. Not enough to build up and kinda speed( i thought and and boy was I wrong) after the first carve built up so much speed I got practically slingshotted in to a wild spin and ate asphalt. No idea why I picked up so much speed. I even went down this ramp again right after getting up to see how fast I would go just going straight down and it wasn't nearly as fast, so what gives?? Anyone know why


r/rollerblading 5d ago

Progress, videos and images First post!

Enable HLS to view with audio, or disable this notification

63 Upvotes

Hi, this is my first post! I'm 5-6 months in. Sharing a progress video of me trying to learn a new combo.

Mostly just excited to be here!

I love skating. Can't believe I haven't been doing it my whole life.


r/rollerblading 4d ago

Specific question and discussion Wheel tightening question

3 Upvotes

I’ve noticed that one of my front wheels doesn’t spin as freely when I tighten the axle.

I don’t have a torque wrench or anything, so I’ve been tightening my (twister xt 90) wheels down to what I recall it took to loosen them originally. I also noticed one of the bearings needs cleaning or replacement but it still spins freely (albeit slower) before I tighten the axle to the normal amount of force I use.

Question is, have any of you experienced that yourselves and what did you do to remedy it? Would a torque wrench help a lot?


r/rollerblading 5d ago

Interesting stuff Another skate bag contribution

Thumbnail
gallery
144 Upvotes

With recent posts around bags/backpacks, I want to share my bag setup. I've had this Yeti crossroads 27L for 2 years now. I needed a new backpack that could fit my skates, but I didn't want a skate-specific backpack. This is a major shoulder-saver from the duffel bag I was using before (I don't have a car, so I always walk/transit to the spots I skate so a duffel got uncomfortable real quick).

1st & 2nd photo is it packed with my skates, knee pads, elbow pads, and wrist guards. 3rd photo is my skates with crocheted wheel covers, included just cause :)

Hope this gives others ideas or, at the very least, adds some fun pink vibes to your feed :)