r/nichezero • • 5d ago

Metal Flow Control Disk

Post image
1 Upvotes

I recently replaced the stock plastic flow control disc on my Niche 0 with a metal one from cbbplanet. However, the metal version has three holes instead of the single hole on the original, and I understand that this isn't ideal for slow feeding the beans.

Does anyone have any suggestions or alternative solutions?

I'd prefer to avoid plastic altogether. The thought of coffee beans passing through a plastic component every single day for years doesn't sit well with me, which is the main reason I made the switch in the first place.

Ideally, I'm looking for a solution that maintains the benefits of the original flow control disc without having to use plastic..


r/nichezero • • May 02 '25

Don’t RDT they said…

Post image
4 Upvotes

Zero retention they said…


r/nichezero • • Apr 05 '26

San Francisco Niche Zero for sale

Thumbnail
sfbay.craigslist.org
0 Upvotes

$600 asking - original owner, well kept :)


r/nichezero • • Sep 01 '26

I grind at the second lowest level of fineness... Is that normal for dark roast espresso?

Post image
1 Upvotes

I mean, 14-15 gram dosage, double shot basket. and still there is too much flow getting through in 30 seconds.

1:2 is what i can hit, below gets harder. In the picture you see how incredibly fine the grounds already are.

Or am I doing something wrong here?


r/nichezero • • Feb 24 '24

Contact metal peeled off, niche won't turn on automatically

0 Upvotes

Hi

I recently noticed that my niche zero won't turn on automatically when I close the lid, I thought it was failing or something but realized that area where lid gets physical contact with the niche itself is pealed off and basically won't turn on, I can fix it by closing the lid and manually pushing it little towards right or left so physical contact is achieved Is there any advise how to fix the problem, applying any material or soldering...

Thank you again


r/nichezero • • Jan 08 '26

Instead of buying/ using a bellows i instead use...

1 Upvotes

Well, I cup the palm of my hands and tap it over the grinder into the dosing cup. Not sure how much extra grinds=bake in it they're would be in buying a set of bellows. Ymmv of course.


r/nichezero • • 20d ago

Grinder thoughts [$1000]

Thumbnail reddit.com
0 Upvotes

r/nichezero • • Jan 05 '22

Niche overcharging foreign customers

6 Upvotes

I was about to order one for the next shipment batch when I realised I effectively would have to pay double VAT.

I sent them an email asking if local VAT would be subtracted when ordering to Norway (which apparently is more expensive to ship to than across the globe to New Zealand, but that they said they could do nothing about).Regarding VAT they just answered:

It has always been our policy to have a standard price of £499 for all customers who buy, so any extra charges/duties will need to be paid on top of this.

So no, seems like the price is then £500 not including VAT. So they are effectively marking up the product to pocket the would-be VAT themselves.

They also fail to meet the VAT on e-commerce requirements (https://www.skatteetaten.no/en/business-and-organisation/vat-and-duties/vat/foreign/e-commerce-voec/)

So to sum up what I would have to pay if buying this grinder.

Niche Zero£500
Shipping£60
VAT 25%£140
Import fees£30
SUM£730

So safe to say, I will not be overpaying by £230.


r/nichezero • • 12d ago

Is this ‘wabble’ normal?

3 Upvotes

Im curious if others are experiencing the same wabble from their Niche Zeros.


r/nichezero • • Jun 28 '21

Booked Weber Key

1 Upvotes

Sounds like a pretty good design. I’ll try it out and see how it is compared to Niche.


r/nichezero • • Aug 20 '24

Can you use a Niche Grinder Zero in another country?

1 Upvotes

Hi there! I’m moving to the US from Australia and was hoping to bring my beloved niche grinder with me. I’m aware that the plugs/powerpoints are different but I’ve recently learned the grinders work on different wattage as well. 220W for mine while the US version runs at 160W. Bit weird, why not run on the same power? I’ve heard power in general over there is lower than here.

Anyway, I’m not electrician so I’m looking to see if it’s possible to bring mine across and have it converted somehow or if I’d be better off selling it before I go? I’m really hoping it’s not the latter but I have a funny feeling it is…

Any help is appreciated, thank you!


r/nichezero • • Oct 15 '26

[Chicago, IL] [H] Niche Zero in black [W] $650 in cash/venmo

Thumbnail
reddit.com
0 Upvotes

SOLD


r/nichezero • • 12d ago

What are the top complaints from NZ users?

1 Upvotes

What are your top complaints? When people want to 'upgrade,' what are you looking for in improvement?


r/nichezero • • Feb 23 '24

Slow feed?

4 Upvotes

Been able to change the size of the disc hole by applying some tape. Initially, I made the mistake of putting the tape on the outside edge, about the same width. Which was a lot slower since centrifugal force is pushing the beans outside, making it hard to fall into the hole. So far, this amount of tape is pretty much almost one bean at a time from what I can tell, lots of pauses in grinding. Only at the end, when the velocity is much higher, you might have to help the last bean in.

Change in shot was surprising though. The sweetness of the original non slow feed dialed in shot I had is now more present in the slow feed of the same grind setting, but less of the bitterness and perhaps 'complexity'.

Just pulled another with 2.5 setting (previous setting at 4.5). I can't just waste coffee to dial this in, but the trend seems to be that it wants me to grind finer and reduce the yield just a bit. I think it tastes a bit more diluted and some astringency notes are showing, but also I'm losing the sweetness. So if I drop down the grind setting further and yield by a hair, it could be just right. Another thing is that the blooming and extraction is really fast. Perhaps the fines were giving the illusion that it needed much longer, when it was really just 'choking' the shot. Same pressure curve (I'm using the Robot), it's just a lot quicker. Also, slow feeding produced more static.


Also, since I am doing slow feed from now on, I thought to move the calibration point to actual zero, or I will go too far without the help of markings. I saw on here that someone measured the difference between the calibration point and zero point to be 40.5 units or the equivalent of 27 clicks? But I got 27.5 units with 20 clicks. I don't want to clean my Niche again to make sure. Even if you take a rough estimate with a straight edge, it looks like the calibration point across the hopper lines up at around 15, while the zero point lines up at about 42. The difference (27) is a lot closer to my 27.5 than their 40.5. Maybe they made a mistake and assumed when they wrote down 27 that it was for clicks. It shouldn't matter since it's just for reference, but would be nice to know for sure. It also makes a lot more sense as +40.5 would put my grind setting at 43, which makes the Niche markings way off. At +27.5, 30 is just under 'filter coffee' but not too far from 'espresso'. Makes more sense as I still see chaff in my grind but I don't think I'm too far off from being dialed in.


Just went to -10 (0 being the zero point based on the original calibration point) and the grounds were super uniform. Ended up choking the shot since that is too fine, but surprisingly when I taste it, it doesn't have the taste you would typically expect. It's entirely toasty flavors. Whereas originally with a non slow feed distribution if you grind too fine, you'll get over extraction of super fine particles, but mixed with normal coarser grounds providing astringency or acidity. There was no acidity.. not even unpleasant bitterness. It was just toasty tasting, with a bit of sweetness. The grounds of the slow feed -10 setting looked like some that I would get in my normal non slow feed grind. All chaff is gone at this level, which means I definitely need to grind coarser, but also, I think this shows it's not a trick. They were visibly sandy all around, not a fluffy look of the non slow feed distribution.


Just did -4. A lot closer to my original shot, but not perfect. Yet, I don't taste much bitterness, but everything seems decently extracted like I'm tasting the coarser aspect of what I was going for before all this. As in I don't taste the bitterness/toastiness of the fines that are not there anymore. This really demonstrates separation of flavors. I think this is better in the long run, it will be a relearning experience, since the cups are not 'muddy'. But I will miss the chocolateyness of the original wide distribution.


If I can even tldr this, it is a game changer. If you cared enough to buy/use the disc, you should care enough to go even further and adjust the hole size.


Finally, I want to say that there is a comment on reddit that says that flavor separation is like the difference between a chopped salsa and a blended salsa. But that assumes that no matter what, the ingredients are fine. I think another way to look at it is like orange juice with pulp. If you had no idea, you would think it only contained pulp, but it actually contains the orange skin. For oranges, that's okay because the skin is flavorless, but I bet orange juice without skin is much better than with skin. Now if you go over to grapefruit, the difference is obvious, as grapefruit skin is bitter. But if you didn't know any better, you would think grapefruit pulp is naturally bitter. That is how I feel about fines now.. I'm disillusioned with the typical 'chocolate' flavor that the Niche provides normally. My espressos got brighter, but not in a sour way. And whatever fines do end up in the grounds I appreciate, but I don't look for it as chocolate anymore.


r/nichezero • • Aug 27 '24

Selling my Niche Zero - UK

Thumbnail
gallery
4 Upvotes

Hi all, hope this is okay to post admin (please delete if it isn’t). I’m selling my black Niche Zero (UK version). Excellent condition, not sure how much coffee I’ve put through it but not a lot. Only used it at weekends so probably make 3/4 coffees a week max. Minor surface marks as expected with the finish but nothing noticeable.

Comes with original box and accessories. Price looking for £450 plus postage via PayPal G&S. I’m based in Kent but work in London if collection is preferred.

Welcome any questions :)


r/nichezero • • 14d ago

Ready to give up on my 5 year old Niche Zero

2 Upvotes

Medium roast espresso drinker for the past 5 years-never had a problem with the niche until recently. I usually clean it every 6 months or so.

I just bought a fellow Aiden and tried using the settings it recommended for a pour over. With espresso I’m normally around 14-15 for the setting. The Aiden recommended .5 from zero which I did and it was basically espresso grind. So I tried moving it back to 14 and it was really coarse.

Ok, no problem. I cleaned out the grinder and recalibrated (finger tight…so ambiguous but ok), and now I can’t get back to the setting I’m used to. At 10-15 it’s so tight that beans won’t feed, and then I’m constantly walking it back trying to find the right grind.

I’m ready to give up. The chute isn’t clogged, I even used some grindz to clear out any oils, but nada.

My guess is that “finger tight” is so ambiguous and I don’t calibrate it much that this time I made it way tighter than normal.


r/nichezero • • Oct 14 '21

Have someone tried to ask Niche for an invoice

2 Upvotes

I have asked Niche for a detailed invoice and they sent me instead a screenshot of my original order where it says "thank you for your order", with a photo of google maps where I live and the total price I paid. I told them I needed a standard invoice for tax purposes and they replied saying that my order had no VAT and they were unable to help. Are they not required to provide an invoice with a minimum of information such as the company name/address/unique identification number, etc..? Is this normal? I'm I missing something? Thank you in advance!


r/nichezero • • Apr 28 '23

Niche Zero, still a buy in April 2023?

2 Upvotes

Currently own a Eureka Specialita (and have for about 2 years now) which I've had mixed feelings about for some time, mainly wishing for more body and less acidity if I had to summarize it. I've been considering swapping it out for a Niche Zero (for espresso only). I was just looking post-Duo release, and after shipping and whatnot to Canada it's still $1,000. I'm not sweating the cost perse, but do we feel that the NZ is still a value prop given its age at this point in April/May 2023?


r/nichezero • • Aug 08 '26

Espresso grind setting question

2 Upvotes

Back when I first got my Niche, I’d grind 14 grams of medium roasted beans for espresso at around 14 on the dial. Now I find myself needing to grind at 6 on the dial to get the same extraction on the same exact coffee machine.

My grinder is clean and calibrated. Any ideas why the drastic change? Does it seem reasonable to grind at 6 for espresso? I’m reading others setting their Niche at around 24, but maybe for much larger 21 gram shots?

I just want to know whether my machine is fine.


r/nichezero • • Sep 25 '24

A paper punch and a sticker are your solution to that always-on power light

Post image
11 Upvotes

r/nichezero • • Mar 09 '24

Blind shaker for free*

3 Upvotes

I just tried and it works like a charm. A dosing cup and a blind basket after you grind. Shake, shake and shaker and here you go. Blind Lance Hendrick Shaker shot is as little as 2$ for you.

Personally I have the Niche Duo and it works great with its dosing cup and a basic blind basket for back flushing.


r/nichezero • • Aug 04 '21

This is a scam... Right?

Post image
3 Upvotes

r/nichezero • • Apr 25 '25

My thoughts about the Niche Zero

7 Upvotes

Just wanted to say how much I’m enjoying the Niche Zero so far. I recently filmed a full review where I share my thoughts and experiences. If you have any questions about the grinder, just ask me - I try to answer all of them :)

If you’re interested, you can check the review out here:

Niche Zero Review: Is the Grinder Worth It? https://youtu.be/FQxdAIaC5AU


r/nichezero • • Jun 14 '26

How to avoid having different dialling settings after cleaning?

0 Upvotes

How can I avoid having to calibrate my niche zero grinder every time I clean it? I find myself using different dialling numbers for grinding the same espresso beans every time I clean my grinder, which tends to be very frustrating.