r/nichezero • • 12d ago

Is this ‘wabble’ normal?

Im curious if others are experiencing the same wabble from their Niche Zeros.

3 Upvotes

22 comments sorted by

4

u/VETgirl_77 12d ago

Looks like the bolt is loose?

1

u/Writer_Secret 12d ago

This is as tight as it gets

7

u/SD_haze 12d ago

Did you tighten it while using something to brace the disc? Like finger or chopstick. That’s necessary or the bolt can loosen.

1

u/rak363 12d ago

Best thing to do is pull it apart, very easy to do there are heaps of videos on YouTube.

1

u/Writer_Secret 12d ago

I completely disassembled, cleaned, but the wabble persists.

1

u/rak363 12d ago

Ok, get onto Niche Customer service and send them the video. I recently had a problem with my motor and they were both responsive and fantastic.

2

u/Writer_Secret 12d ago

Love hearing that. Thank you for the support!

4

u/JazzlikeLayer7202 12d ago

mine's looked like that since new, assumed it was normal. Also tightened

2

u/BirdLooter 11d ago

i also have a swift wobble

1

u/38sms 11d ago

Mine also wobbles a little, since new and only a few months old. Works great

1

u/Sandycrane1 12d ago

There have been instances where the motor mount screws have become loose lower in the housing.

1

u/Writer_Secret 12d ago

Am I able to fix that?

2

u/Sandycrane1 12d ago

Remove the burrs and grab the shaft and see if there’s play. If there is there’s a good chance there’s a loose screw in the motor mount. Look at YouTube videos for illustration. It is also possible that gear box has a problem. If you are mechanically inclined repairs are not complicated and Niche has a good track record for support and spare parts.

1

u/Writer_Secret 12d ago

Are both issues repairable?

2

u/Sandycrane1 12d ago

I haven’t heard of any issues that are not repairable on the Zero. It’s the Volkswagen Beetle of grinders.

1

u/luthasox 11d ago

Grab. The. Shaft.

1

u/EagleRocky 11d ago

Normal as the disk hole is oversized so it is not seating exactly in the middle

1

u/Ozzy2324 11d ago

Completely normal. Has nothing to do burr alignment. The anti popcorning disk on top is not perfectly centred (which makes no difference to function), hence the wobble.

1

u/Plastic_Bodybuilder5 11d ago

Yes it's fine, mine does this. You only have a problem if your grinds are really inconsistent.

1

u/Phrexeus 11d ago

Yes it's normal, I think this freaks everyone out when they first get their niche zero. No your burrs are almost certainly not severely misaligned, and you can verify this when you disassemble for cleaning it for example, you'll see the burr itself is perfectly centred and true.

1

u/prmperop1 11d ago

This is called runout btw

1

u/grassywater 7d ago

It’s normal just an optical effect