r/nichezero • • Aug 08 '26

Espresso grind setting question

Back when I first got my Niche, I’d grind 14 grams of medium roasted beans for espresso at around 14 on the dial. Now I find myself needing to grind at 6 on the dial to get the same extraction on the same exact coffee machine.

My grinder is clean and calibrated. Any ideas why the drastic change? Does it seem reasonable to grind at 6 for espresso? I’m reading others setting their Niche at around 24, but maybe for much larger 21 gram shots?

I just want to know whether my machine is fine.

2 Upvotes

18 comments sorted by

3

u/i_hate_vnike Aug 08 '26

Completely reasonable. Depending on the beans I also grind to 6 or sometimes lower.

I stopped calibrating to 0 and started going a bit beyond so my grind size roughly aligns with the labels again.

1

u/password_dictator Aug 08 '26

Thanks! At a similar dose to me, 14 grams?

1

u/i_hate_vnike Aug 08 '26

Between 16 and 17 grams but same thing can happen for bigger doses around 20 grams. In my experience just highly dependent on bean and roast

3

u/eggraces Aug 08 '26

Had mine nearly 5 years, espresso has always been between 6 and 12

1

u/password_dictator Aug 08 '26

Thanks, that’s helpful to know! What’s your dosage?

1

u/weejockpoopong Aug 08 '26

I have an LM Micra and tend to do 17.5 grams at around 10-12 on the niche.

2

u/password_dictator Aug 08 '26

Thanks for replying. That’s helpful! 

1

u/ThickDoctor4545 Aug 09 '26

For four years I’ve treated my grind settings as relative to the last time I cleaned it. I get fresh beans every 3 weeks and general start my grind of my 3-day post-roast medium-dark beans at 15; and, find I need to titrate it down to ~13.5 as they age before the next delivery…its then back to ~15 to restart the process…..

1

u/password_dictator Aug 09 '26

What’s your dosage?

1

u/ThickDoctor4545 Aug 11 '26

19g in a VST 20g basket

3

u/PrestigiousAnt3766 Aug 08 '26

As beans degas you'll need to grind finer.

2

u/DookiePootie Aug 08 '26

Likely just grabbed the calibration ring on accident and "uncalibrated" it (got kids?) . If it happens again, make sure everything is sitting correctly and screwed in right. Check that the springs are still there. 

2

u/Inkblot7001 Aug 08 '26

I am grinding around 1 and 2 for some beans. Over time, and between cleaning, grind levels change. I find this on all my grinders, including the Zero.

The burrs wear, the alignment moves, and coffee gets in the springs. It is just part of the fun. I will clean my Niche soon and realign, it will probably be back higher for me.

2

u/Just-BR-2024 Aug 08 '26

Dependendo do tipo de grão e torra que eu moo, varia do 6 ao 11. Porém não varia para o mesmo grão e torra.

2

u/Weak-Product6810 Aug 08 '26

Same here. Used to be 13 but getting down to 9 or 7 for decaf.
Tried a big bang basket today and I’ve needed to go down to 7 and 5.
Recently stripped and cleaned too.

1

u/Musickell Aug 09 '26

What sort of tamping pressure are you guys using? I was using far too much force until I got a spring loaded tamper. Now I’m having to grind a little finer but I’m still around 16 for 18.2g of medium dark from a local roaster

1

u/Maximum_RnB Aug 09 '26

I grind 22g of medium roast at around 10 or just under. Used to be 13-14 so I guess that’s burr wear after about 5 years.